Where is the best place to burn engine oil? Can you fix it by burning engine oil?

Hello, burning engine oil can be repaired, if it is not a high-end car, it is recommended to go to a 4S shop, if the car is old, it will be cheaper in the repair shop. Let me talk about the following reasons for burning engine oil:

There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and lead to the burning of engine oil, making the vehicle appear:

1. The valve seal is corroded and aged, and the sealing performance fails.

2. Wear occurs between the piston and the cylinder wall.

3. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring, and the oil scraping performance is weakened.

4. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

If you find that the engine oil is burning, go to the repair station as soon as possible for inspection. If there is an engine failure (such as poor piston ring sealing, valve oil seal leakage, cylinder gasket leakage, etc.), you should go to a 4S shop or maintenance shop to check and repair the fault as soon as possible.

If it helps.

You can go to Lindi to repair, which is specialized in dismantling and burning engine oil.

company, only a few thousand dollars is enough. In other places, each overhaul costs tens of thousands of dollars.

Go to the 4S shop. Direct inspection of repairs.

It is recommended that you go to the local maintenance quality store for maintenance, and the current projects that burn engine oil have dismantle-free technology. In many cases, it is related to the domestic driving environment, oil quality, driving habits, etc., and cannot be generalized. Therefore, it is still necessary to carry out professional overhaul and then carry out treatment.

The problem of burning engine oil cannot be solved, and if it can be solved, those big names that burn engine oil will have been solved long ago.

Burning engine oil can be repaired, in fact, burning engine oil is a very common phenomenon, and there is no need to worry too much, but if you burn engine oil, you must solve it as soon as possible. However, to solve this problem, it is necessary to know what causes the burning of engine oil. If the engine does not make any abnormal noise, the bearing clearance is not large, and the cylinder piston is not damaged, then as long as these four parts are replaced, the problem of burning engine oil can be solved, and there is no need for overhaul.

What are the reasons for burning engine oil:

1. Piston ring: The oil burned is mainly when running at high speed, and the blue smoke cannot be seen, but every time you run at high speed, the oil is burned very badly. This one is because the piston ring is burned.

2. Valve oil seal: The engine oil is burned because the blue smoke will be emitted for a few seconds when the car is cold, which means that the valve oil seal is burned out.

3. After checking and replacing these four components, the problem of burning engine oil in the car is completely solved. Originally, some engines were used very well, but it was a pity that the engine service life was shortened because of the overhaul caused by burning the oil. There are also some German large-displacement models, which are congenitally burned engine oil and cannot be removed.

Some other models are caused by damage to the lower half of the car's air valve, but this kind of car is relatively rare.

Photo by Li Linwei) @2019

There is no need to overhaul the engine oil, just change the cylinder liner, piston and piston ring.

If the phenomenon of burning engine oil in the car is not very serious, sometimes you can choose a thicker engine oil, and if it is serious, it must be overhauled; The problem of burning engine oil will lead to an increase in carbon deposition in the car, weak acceleration, increased oil loss, and in severe cases, the engine will be scrapped.

Before deciding that the car needs to be overhauled, you need to learn to judge whether the car is really burning oil. It can be judged by whether the engine oil is lower than the lower limit of the ruler, whether the exhaust pipe emits blue smoke when the car starts to ignite, etc.

The solution to burning engine oil in automobiles.

The metal is forged on the friction surface through the high temperature and high pressure inside the engine to form a new friction surface, increase the size of the original workpiece, strengthen the seal, and protect the original friction surface.

This kind of additives are relatively rare on the market at present, and if the amount is sufficient, it can be added once and even for a long time without having to add it in the short term. It is necessary to pay attention to the maintenance of the car, and to go to the troubleshooting of the car. In this way, problems can be solved or prevented before they occur.

Most of the engine oil is caused by the piston ring being trapped by carbon deposits. Relying on the addition of high-viscosity engine oil to continue life is only an expedient measure to cure the change. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in the combustion and forms more carbon deposits, which in turn aggravate the degree of oil burning and form a vicious circle.

Too much carbon deposits will clog the fuel injector, resulting in poor atomization and poor combustion. In the long run, it will cause cylinder wall strain, or even cylinder burst, and finally the engine can only be disassembled for overhaul. Regression.

The solution to burning the oil.

In the habitual thinking of car enthusiasts, they always think that burning engine oil should be overhauled, so that they not only have to bear high maintenance costs, but also bear the unpredictable risks and depreciation losses brought about by the overhaul. Destroy the airtightness and precision of the engine. And there is a possibility that the engine oil will burn again after tens of thousands of kilometers, so overhauling the engine is not sustainable.

Now the dismantling-free technology has been very mature and has gradually been accepted by the majority of car owners. Zhilao, especially the company with PNF patented technology, has completely gotten rid of the technical shackles of the operation of the auto repair shop, without removing a screw, the owner can operate it himself, and the piston ring is repaired and released during driving, and the effect is remarkable.

If it is serious, it must be overhauled, and if it is not serious, it can be considered.