Automatic production line for bottled beef sauce Design of transmission mechanism and filling mechan

1. Bottle unscrambler.

Equipment use. 1. This product is suitable for automatic arrangement of glass bottles, plastic bottles, etc.

2. Equipment features: This machine is used with the filling machine, and the bottle conveying situation on the filling line is detected by the sensor, and when the bottle is vacant on the conveyor line, the equipment starts to run, and the filling line is used to convey the bottle. Touch screen operation, intuitive and concise high-quality stainless steel material production, waterproof and anti-corrosion, to ensure food safety and equipment use.

3. Electricity parameters: AC380V

Four: installation size: 1300*1100*860

Five: Material: stainless steel.

Six: Capacity: 100 bottles per minute.

How it works. The turntable of the bottle unscrambler drives the product to rotate;

The product is close to the edge of the glass turntable under the fluctuation of the unscrambling paddle;

The product is exported in an orderly manner along the unscrambler of the bottle unscrambler.

It is suitable for the automatic transfer of round bottles and square bottles, such as conveyor belts connected to labeling machines, filling machines, and capping machines, and automatic bottle feeding to improve efficiency; It can be applied to the middle connection of the assembly line as a buffer platform to shorten the length of the conveyor belt.

2. Bottle washing machine.

The bottle washer is suitable for glass bottles, plastic bottles and other brush cleaning and water flush cleaning, which are special equipment for cleaning alone or in combination.

The machine is composed of stainless steel water pump, high-pressure nozzle, electrical box, etc. The machine adopts high-pressure backflush spray washing, and the debris on the bottle wall can be removed and dropped into the water tank in time.

Parameters: Voltage: AC 380 volts.

Power: kW.

Production capacity: 80-100 bottles min.

Installation size: 740*360*1000mm

Bottle requirements: shape: round bottle;

Diameter: 50-90;

Height: 80-130

3. Beef sauce bottling machine.

1. Production capacity.

Capacity: 40-45 bottles per minute.

2.Function: automatic feeding + automatic feeding + automatic metering + automatic filling + automatic oil filling.

3.Conditions of use: three-phase five-wire power supply + compressed air + water supply pipeline + drainage channel.

The equipment needs to be equipped with auxiliary equipment: vacuum pump, vacuum gas tank).

Filling meter: 10-300g

Total machine power: 2kw

Power supply voltage: 380V

Machine net weight: 400kg

Four: oil separator truck.

Description of the detachable car.

1. The car is used when the sauce is out of the pot, and the sauce poured from the pot passes through the separator car to simply separate the oil and sauce, which is convenient for controlling the proportion of oil and sauce during filling.

2. The car is equipped with a hydraulic lifting device, and the lifting distance is nearly 700mm, so as to load the separated oil and solids into the corresponding containers.

3. Material: SUS304

4. Size: height 1330, width 740, length is calculated according to customer requirements.

Fourth, automatic capping machine.

The whole machine has a simple structure and easy adjustment, and is suitable for the screw cap kneading of round bottles, square bottles and flat bottles of various materials, and is the most commonly used capping equipment in the bottling production line.

The whole line of equipment is required.

Screening machine - bubble cleaning machine - dicing machine - stirring tank - stirring pot - bottle unscrambling machine - bottle washing machine - filling machine - capping machine - round bottle vertical self-adhesive labeling machine - automatic inkjet printer - bottle mouth or bottle body film heat shrinking machine (sleeve labeling machine) - pasteurization line - automatic folding cap sealing machine.

I don't quite understand what you are expressing, do you mean that there is an inner lid inside, and then there is an outer cover?

Is the function implemented to automatically press the inner lid and then automatically close the outer cover?

If this is the case, the program needs to be adjusted, and the program will automatically recognize the barrel mouth and automatically adjust the cap.

Is it automatic lid unloading or automatic lid loading? Can you send out the lid ** to take a look?

The food factory of beef sauce has recipes and equipment information, as well as staff, funds, sales channels and customers.

Preparation of beef sauce:

1. Pour oil first to fry the minced beef and pour it out, pour an appropriate amount of oil into the pot and then fry the fresh chili powder, fry it and pour it out, then put oil in the pot, and then put in various seasonings such as bean paste, yellow dry sauce and tomato sauce in turn, and stir-fry the sauce (with low heat).

2. Put the beef and chili powder into the sauce, continue to stir-fry and serve.

Honey Beef Sauce Preparation:

1. Ingredients: refined vegetable oil, soybean paste, small yellow beef, chili, sugar, peanuts, monosodium glutamate, green onion, ginger, garlic, precious spices, potassium sorbate, ethylene maltol and shortening (antioxidant).

2. Using the traditional natural fermentation process of the people in southern Anhui, the original soybean paste prepared by natural light for more than two months is accompanied by the original beef marinade boiled with small yellow beef and small yellow beef bones, the whole juice marinade is not enough to boil for more than 30 days, and it is added to the natural soybean sauce and small yellow beef and boiled for 3 hours to become a whole sauce beef sauce series with unique fragrance and taste.

I don't understand the process!

We do filling, labeling, sealing equipment!

I have a cheap set of equipment here, and I also make beef sauce. You are**?

I want to make braised meat sauce, can your recipe work?

Mechatronics has the basic theory of mechanical, electronic and hydraulic (pneumatic) integration technology, masters the operation, maintenance, commissioning and repair of mechatronics equipment, and masters the basic methods and basic skills of applying the process design and processing technology of mechatronics equipment.

Mechatronics technology has a wide range of professional applications. Graduates can mainly be engaged in the maintenance, commissioning, operation, manufacturing, installation and marketing of CNC equipment and other technical and management work, to put it bluntly, belong to the blue collar!

Mechanical design and manufacturing cultivates senior engineering and technical talents who have the basic knowledge and application ability of mechanical design and manufacturing, and can be engaged in design and manufacturing, scientific and technological development, applied research, operation management and operation and sales in the field of machinery manufacturing in the front line of the main industrial industry. Belongs to the mechanical engineer.

Graduates can be engaged in the design, manufacture and automated production management of various machinery, tools, instruments and meters in large and medium-sized enterprises, and the composite work of mechanical manufacturing technology and computer application technology, such as computer-aided design and manufacturing of mechanical products, computer-aided product modeling, computer-aided process management and CNC machine tool operation and maintenance, and can also be engaged in the sales and technical services of machinery and related products.

Students trained in electrical automation should have the engineering technology foundation and certain professional knowledge in a wide range of fields such as electrical technology, electronic technology, control theory, automatic detection and instrumentation, information processing, system engineering, computer technology and application and network technology, and be able to engage in system analysis, system design, system operation, and other fields such as motion control, industrial process control, power electronics technology, testing and automation instruments, electronics and computer technology, information processing, management and decision-making. Senior engineering and technical personnel working in scientific and technological development and research.

The employment is mainly engaged in the fields of system operation, automatic control, power electronics technology, information processing, test analysis, research and development, economic management, and electronic and computer technology application related to electrical engineering. Electrical automation is widely used in factories, so to speak, electrical automation is the only thing that cannot be missing in the factory, and it is the pillar of the factory! If you are proficient in electrical automation, the employer immediately wants you, no matter what the unit, it is best to be an electronics factory, because electronics factories use automation, programming, and design every day.

If you are very concerned about the conditions of the job. The best one is the Electricity Bureau. The benefits are good and the treatment is high.

Then there is the design institute, which is relatively easy to do. The hardest was the Engineering Bureau. Because you have to run around with the construction site.

But the wages are not low either. And it can also change careers in the direction of automation, electronics, etc.

1. Mechatronics.

For beer and beverage, food packaging, daily chemical and other industries, it is engaged in the manufacturing, installation, commissioning, operation, maintenance and management of mechatronics filling automatic production lines and related packaging automatic machinery and equipment.

2. Machinery manufacturing and automation.

Graduates are mainly engaged in the design, manufacture and modification of products in the machinery and equipment industry, the production and manufacturing of transportation equipment, the operation, installation, commissioning, maintenance, management and technical sales of molds, home appliances, hardware, electronics, toys and other industries.

3. Electrical automation technology.

Graduates can be engaged in the design, installation, commissioning, maintenance and technical transformation of commonly used electrical control circuits; application development, technical support and after-sales service of electrical automation equipment and control systems; design, installation, commissioning, operation and maintenance of small power supply and distribution systems; Application programming, installation, commissioning, operation and maintenance of microcomputer control systems; Development, installation, commissioning and management of electronic products.

Fourth, mechatronics technology (mechanical design CAD).

Graduates can be engaged in the design, manufacturing, maintenance, management, technological innovation and transformation of mechanical and electrical products and equipment in enterprises or research units such as machinery, electronics, toys, molds, etc.

No matter what kind of enterprise it is, as long as you tell the designer the purpose of automation you want to achieve, set a limited time, make a payment to meet the requirements, so that your choice will be very wide, and you will find the ideal **, large companies give people a feeling of being a big bully, because it is not easy to say, so it is recommended that you find more people in the industry for the automation you want to do, and then make a comparison, and the famous ones are not necessarily good.

There are many well-known enterprises that do the design and manufacture of automated production lines, if you want to compare, it is recommended to go to some similar universities to find on the automation platform!

Qingzhou Luqing Packaging Machinery Co., Ltd. is a manufacturer specializing in the development and production of liquid filling equipment. The company has strong technical force, advanced process equipment, complete testing instruments, and a reliable quality assurance system. On this basis, we continue to develop new products with excellent technology and excellent quality.

GFP negative pressure series filling machine is the company's flagship product, which is mainly used for liquid filling with a certain concentration, suitable for the filling of liquor, wine, soy sauce, vinegar and pesticides, and solves the problem of overflow of filling liquid. The product has obtained the "manufacturing measuring instrument production license". The computer linear series filling production line developed by our company is a large-capacity (1145 liters) and high-concentration (edible oil, dark soy sauce filling equipment 0536-3288806) produced by our company according to the needs of users

Do you want an all-in-one machine or a split machine, I have a fully automatic filling and sealing production line equipment here.

Wenzhou Jincheng plastic cup yogurt filling and sealing.

1. Scope of application: The automatic filling and sealing machine produced by Wenzhou Dacheng Machinery is a packaging equipment designed for the sealing of cups, boxes, bowls, and heterocontainers. It has easy operation, stable performance and easy maintenance. It can be used as a stand-alone machine or as a production line.

The machine adopts automatic program control, beautiful appearance, reasonable structure, complete functions, easy operation, in line with the requirements of the national health law, to meet the standards and large-scale production. Stable performance, high production efficiency, easy to operate.

2. Overview: 1) Basic process: automatic cup dropping, automatic piston filling, automatic photoelectric film calibration, automatic coding, automatic hot pressing sealing (automatic sealing twice), automatic film cutting, automatic waste film collection, automatic cup discharge.

2) Frame part: The frame is made of channel steel, and the outer layer is welded with high-quality 304 stainless steel. Two-hole single-row aluminum alloy acid-resistant aluminum mold. (A new type of machine can be designed according to user needs).

3) Transmission system: motor, reducer, cam splitter, template, etc. Intermittent transmission device, pneumatic control element, intelligent digital display temperature control system.

Precision cam splitter stepped gap operation, high-performance reducer; The transmission is stable, the impact force is small, and the positioning is accurate.

4) Filling system: The storage cylinder is made of stainless steel 304 material, and the cylinder is a linear and vertical action piston pump for quantitative filling, non-contact filling, and the filling volume can be adjusted freely and accurately.

5) Coding system: automatic ribbon coding (constant temperature control) is adjustable, and the word code can be quickly replaced. Easy loading and unloading.

6) Film calibration system: photoelectric eye tracking automatically corrects the alignment of the film pattern and the cup mouth.

7) Sealing system: Adopt constant temperature (intelligent temperature control) hot pressure sealing, and the sealing pressure is adjustable.

8) Film cutting mechanism: cold punching cutting.

This machine adopts a combination of gas and electricity, and the voltage is 380V50Hz. This machine is suitable for the packaging of PP, PE, PET, and other materials, and is suitable for the sealing of any shape of boxes and cups. The seal is firm and reliable, no leakage, and the seal is neat.

(A new type of machine can be designed according to user needs).

Second, the basic parameters:

Type: Filling and sealing machine.

Power supply: AC380V 50Hz

Power: 5kw

Air source: packaging speed: about 1600-2000 cups per hour.

Weight: about 350kg

Appearance: 2800*680*1750mm (width according to the sample).

Packaging Type: Cup.

Degree of automation: fully automatic.

Automatic Filling and Sealing Machine Do you want bag packaging or bottle packaging bag packaging star, glow.