-
Because of the small internal space of the laptop, after long-term use, a lot of dust will accumulate on the cooling fan, and it should be cleaned regularly.
This is the lesson of my blood! My notebook has been used for more than 3 years, and the graphics card chip burned two months ago, because of the heat dissipation problem, it took 600 to change the graphics card core imitation spring leakage. When they went to repair, they said that they could provide cleaning services, and the cost was 50 per time (Beijing Dinghao is this price), and they felt that it was not expensive, and it was very troublesome to remove a bunch of screws by themselves.
In addition, for notebooks, the effect will not be too obvious after using a laptop radiator, but if the notebook is hot, and the case of rotten and often used for a long time, the laptop radiator will help greatly, although it is only a few degrees, but it is often these degrees, which will make your computer become stuck and slow, and it is also prone to sudden high temperature and hardware damage (the chip of my notebook graphics card has been burned, and the detection is overheating and short circuit). In addition, the notebook radiator also helps to improve the angle of using the sedan car, I recommend one to you: Kyushu Fengshen's N8, this product has very good heat dissipation performance, when it was not used before, often after the computer runs for a period of time, there will be a card phenomenon, after use, it has been turned on for more than 10 hours, and it still remains smooth.
There is a specific test that you can take a look at.
As a high-end radiator in Kyushu, the N8 is full of power and is still very quiet when running at full speed. At night, I turn on the computer ** thing, and there is almost no noise even on the N8. The N8 workmanship materials are the most luxurious type of notebook radiators, and the heat dissipation effect is naturally the best category.
Therefore, for the pursuit of extreme notebook heat dissipation effect, you can choose N8
Can it solve your problem?
-
It's a little meaning. My highest CPU had 102 degrees at a time.
First of all, you were born to be like this, or was it the way it was.
If it's later, clean the fan and air outlets.
If this is the case, make an exhaust fan and build a heat dissipation base.
The effect of do-it-yourself transformation is much better than buying.
-
The machine is overheating.
1. Use disk cleanup to clear the system junk files.
2. Start --- running--- enter msconfig and uncheck all the unnecessary enablement items (such as msn qq, thunderbolt, emulet, virtual optical drive, etc.).
3. Detect and kill viruses and malware. Turn off real-time monitoring and keep your virus database updated and disinfect regularly.
4. Check whether the heat dissipation vent is clean.
5. Whether the ambient temperature is too high.
6. It is recommended to buy a first-class heat dissipation bracket to help the laptop dissipate heat 7. Close some useless running programs to reduce the burden on the fan 8. Reinstall the system.
9. Contact the service station engineer to help do a dust removal, cleaning and testing of machine parts.
-
The biggest defect of the notebook is that the heat dissipation is not good, which affects the operation efficiency.
-
Summer is here. It's time to face the problem of laptop heat dissipation.
The laptop slows down when it's hot.
We can use it in a room with a lower temperature.
You can also turn on the air conditioner or fan in the room.
to lower some temperatures.
But this does not solve the problem at the root.
We can also buy a laptop cooling pad.
If you are interested, you can also DIY a cooling pad by yourself.
Laptops should generally not be used for more than 5 hours in a row, and the temperature will be very high for long periods of use like in such summers.
This reduces the lifespan of the hardware.
We could use it for about 3 hours to take a break.
Let the hardware also "cool off" for a while.
I'm also using a Lenovo computer.
I feel that the heat dissipation is okay.
Hope mine can help you.
This kind of fault is mostly because the fan is dirty or damaged, and it is mostly dirty, and it will be okay to send it for repair and dismantling, and if it doesn't work, you need to replace the fan. >>>More
Don't have too much silica gel A small layer is good In addition, the copper sheet is not added to have an effect It depends on whether it is necessary That is, whether there is a gap between the heat dissipation module and the core This you can install the heat dissipation module without applying thermal paste and then insert it in the middle with a paper strip to see how thick the paper strip can not be moved in It is not known if you understand If the gap is not large, adding copper will hinder heat dissipation Copper can only replace the thick silica gel when it is necessary to wipe the thickness of the silicone This is the role of whether to add or not is based on your own computer has the final say Hope it helps.
There should be no problem, you can monitor it with z**, I've been using Acer as well. >>>More
50 degrees is a normal problem Sony notebook heat dissipation is generally good I used to use CR-23 Now I'm using EA1S The heat dissipation is very good Than HP is much stronger than HP when you turn on and watch a movie, the graphics card will automatically shut down at 95 degrees and Sony fan is open The back cover can be seen That is to say, you can clean up the dust and HP is completely closed You can only go to customer service My brother's previous CR-23 has been playing for 2 and a half years There has been no problem at all Only once when I played World of Warcraft and had a SW blowout, the graphics card temperature was enough Automatic shutdown once and then clean the ash once It's very easy E series There will be no problems with heat dissipation Don't worry, I double open Journey to the West every day and take a World of Warcraft There is no big problem Only about 60 degrees Below 90 degrees is not a problem.
The reason for the lack of blowing is that the fins at the air outlet accumulate too much dust, which blocks air circulation and gathers heat like cotton. The easiest way is to remove the heat sink of the book (the whole cooling system is not just the fan), remove the dust from the heat dissipation fins of the air outlet and the dust accumulated by the fan blades, remove the silicone grease between the heat dissipation base and the chip, and recoat the new heat dissipation silicone grease. Carefully put it back on. >>>More