Does a desktop computer support a 10TB hard drive?

10T hard drives are available for enterprises and individual users. Whether it is supported depends on the chip of the computer motherboard.

Take Seagate Home products as an analogy:

There are 10TB hard disks for ordinary users, Cool Wolf hard disks, which are used to build a home NAS private cloud.

Get ready. There is also a barracuda for high-end peoplePro,This is a desktop that requires high performance,Or a unique professional person prepares,There are many special industries,Creative professional design professional, etc.,There are still quite a lot of users of large-capacity hard disks,And,The more people develop in the future, the greater the demand for hard disk space。

I don't need to say much about the demand for large-capacity hard drives in enterprises, which is inevitable. Enterprise-level massive disks are the representatives of Seagate nearline storage, such as Huawei and Alibaba.

This kind of Seagate 10TB mass disk favored by enterprises is not very easy to break, and the mean time between failures.

It can work up to 2.5 million hours a long time, and it works 24 hours a day for 7 consecutive days, and it is very stable. And its PowerChoice technology and PowerBalance technology can effectively reduce power consumption, cooling costs, and increase the input and output watts per second capacity, which should be the best performance, lower power consumption, and lowest cost storage capacity expansion solution on the market.

There's also a 10TB CorooWolf Pro NAS dedicated hard drive, which is designed for mid-sized business environments.

It can be applied to multi-bay servers and can support 16-bay combination bays, small and medium-sized enterprises.

More suitable. Say a lot, hopefully.

Mechanical hard disks have a maximum of 10TB, but the current technology of a single disk is generally only 1TB, and 10TB is composed of multiple disks; SSDs are available up to 2TB.

Theoretically, more than 4 can be connected. The IDE interface can be connected to two hard disks, the SATA interface can be connected to a hard disk, you can also use a RAID card, and you can also connect a hard disk on it. As long as your case has a place to install the hard drive, and the power supply is strong enough.

Hello Answer! I've seen your problem dear! This will answer your question, I don't understand the computer, and I found that it was a big piece after dismantling. So how to turn on the computer, there will be a c de disk to answer hello! I'm glad to answer for you!

One IDE port on the main board can be connected to two hard disks (i.e., master and slave disks), and the main board has two IDE ports, i.e. IDE1 and IDE2, so theoretically, one PC can be connected to four hard disks. If you do.

With an adapter card, you can connect.

Pick up more hard disks.

Dear you said CDE disk,It's a file management in the computer.,What about it?,Since it's two hard disks.,Where are they?,How do I only find one, this is one of them.。

Is this the question asked?

Generally speaking, the master-slave setup, while simple, is arguably the most critical of a dual-drive installation. Disks with good performance are preferred as the primary disk, while disks with poor performance are attached as slave disks. For example, if there are two hard disks, one is 6400rpm and the other is 4200rpm, then the best solution is to set the 6400rpm hard disk as the primary and the 4200rpm hard disk as the slave.

Before you start installing dual drives, there are a few things you need to consider. The first is whether the space is sufficient, install the second hard disk with du; The second is whether the power is sufficient, if the computer is running, the power of the electric dao is insufficient, which will often lead to the continuous reset of the hard disk head and damage the hard disk.

Dual hard drive installation precautions:

Clause. 1. It is best to connect the two hard disks to the two IDE ports on the motherboard, rather than connecting them to the same IDE port at the same time.

Clause. 2. The connection method of the hard disk in the installation of dual hard disks is exactly the same as that of single hard disks, that is, the power and data cables can be correctly connected. If the drive supports ATA 66 or higher, a dedicated 40-pin 80-core cable is required.

At present, most of the hard disk interfaces supported by the computer motherboard are SATA, and the motherboard provides several SATA interfaces, which can be installed with several hard disks.

SATA is an abbreviation for Serial ATA, which is Serial ATA. It is a computer bus whose main function is to transfer data between a motherboard and a large number of storage devices such as hard disks and optical drives. Currently, SATA is available in SATA 3Gbit S and SATA 6Gbit S.

For example, the GIGABYTE B85M-D3V-A motherboard shown above offers 4 SATA SATA2 ports (circled with a yellow pen), so the number of SATA drives it can fit is 6 by default.

At present, desktop hard disks have a maximum of 12TB, and desktops generally have multiple SATA interfaces, which can be equipped with 36-48TB.

If the SSD is a PCIe interface, there are many interfaces on the industrial machine, which can form thousands of terabytes of data cabinets, but there is no need for general household use (haha).

Attached are the current mainstream 500GB-6TB HDD read and write speed statistics.

See how big the motherboard supports. However, generally speaking, 1T hard disk space for home computers is enough, and some are not enough, you can add another 1T hard disk. Basically, it doesn't need to be that big.

Home desktop computer host is very easy to use, home use is the best, notebook heat dissipation is not good, do not know how to choose a computer host is recommended to go to the shrimp assembly computer blog first.