What are the functions of the charging pile fire alarm system?

1.The alarm accuracy is high.

2.Real-time identification of alarms.

Based on intelligent analysis and deep learning neural network technology, the charging pile fire in the monitoring area is identified, and the alarm information can be displayed in the monitoring client interface, and the alarm information can also be pushed to the mobile terminal.

3.All-weather operation, stable and reliable.

4.Alarm storage function.

The function of the charging pile fire alarm system is to remind people that the charging pile has reached its limit and will be stopped immediately.

Its alarm system is very useful, if once there is some fire or some fire signals, it will alarm some data personnel to find out in time, which helps to reduce property losses.

Charging piles are electrical appliances, and specific extinguishing agents should be used to extinguish fires.

When electrical equipment catches fire during operation, the power supply must be cut off before extinguishing. If power is not cut off quickly, fire extinguishers such as carbon dioxide, carbon tetrachloride, 1211 fire extinguishers or dry chemical fire extinguishers can be used. When using, a sufficient safety distance must be maintained, and the distance should not be less than 40cm for equipment of 10kv and below.

The utility model belongs to the technical field of charging pile, relates to a safety alarm system of electric vehicle charging pile, does not adopt the mode of traditional artificial network real-time monitoring, but through the research and development of the microprocessing system with sensor, is installed in the charging pile power circuit for real-time feedback monitoring, and develops flexibility.

The electrical fire monitoring system is mainly composed of the electrical fire Internet cloud, the centralized monitoring part, the signal acquisition and processing part, and the sensor part, which are how these components are coordinated through their respective functions to complete this series of monitoring and alarm.

The charging pile fire alarm system is equivalent to a backup for the charging pile at any time.

He will call the police for you in time, and then come to save the charging pile.

Charging piles. It is an electrical appliance, and specific fire extinguishing agents should be used to extinguish the fire. When electrical equipment catches fire during operation, the power supply must be cut off before extinguishing. If the power cannot be cut off quickly, carbon dioxide and carbon tetrachloride can be used.

Fire extinguishers or dry chemical fire extinguishers.

and other fire extinguishers. When using, a sufficient safety distance must be maintained, and for equipment of 10kV and below, the distance should be less than 40cm. When extinguishing an electrical fire that has not been cut off, the following types of fire extinguishers are used:

Carbon tetrachloride fire extinguisher - has a good fire extinguishing effect on the fire of electrical equipment, carbon tetrachloride does not burn, nor conducts electricity. CO2 fire extinguisher.

Ideal for extinguishing fires in electrical and electronic equipment, carbon dioxide has no corrosive effect and will not damage equipment. Dry chemical fire extinguisher - it combines the advantages of carbon tetrachloride and carbon dioxide, and is suitable for extinguishing electrical fires with fast fire extinguishing speed. Note that acid-alkali or foam fire extinguishers should never be used, because the fire extinguishing liquid is conductive, and the person holding the fire extinguisher will be electrocuted.

This liquid will also corrode electrical equipment, and it is easy to remove the old oak afterwards.

The charger used for the charging pile catches fire while charging. It is recommended to report the fire alarm directly when it catches fire, because the new energy vehicle of Liangwan belongs to the battery fire, which is very dangerous. Since new energy vehicles are equipped with power battery systems, their safety is mainly reflected in the safety of DC high voltage and power batteries.

For high-voltage safety and battery safety, new energy vehicles are designed with a series of safety precautions.

For example, a battery system has a protective cover or shield. These protective measures also protect the battery, but because it is difficult for the extinguishing agent to reach the internal battery cell directly, it also brings certain difficulties to the fire extinguishing of the battery. Fuel vehicles** are usually caused by oil circuits or electrical circuits.

Fire extinguishing can be carried out by using a fire extinguisher to block the entry of air.

There is no oil on the EV,** mainly caused by the battery overheating. When driving, the battery burns, so the battery management system must be "maintained". If the battery is not of good quality, overcharged, or crashes, the lithium battery may spontaneously combust.

Precautions when extinguishing a fire

When extinguishing a fire, do not touch the car. You must bring full protective equipment. This work can only be done by the fire brigade.

It is advisable for car owners to stay away from burning vehicles and call the fire alarm. Immediately drive the car to an open area in the driverless area and close the key door to get out of the car as soon as possible. Stay away from the vehicle and stay at a safe distance before calling the police.

Fire crews will follow the usual fire extinguishing measures to extinguish battery fires.

The first step of the charging pile is to cut off the incoming power supply, and then use a fire extinguisher to extinguish the fire.

When installing the charging pile, it is best to install an air switch with leakage protection at the incoming line.

Who should bear the losses caused by the fire caused by a charging pile in a small area in Shenzhen? In fact, the financial loss and mental loss caused by this loss to others, I think this responsibility should be borne by the responsible party, first of all, we must find out who this responsibility belongs to. After all, who is responsible, who should bear it, and this fire, or caused some other single-layer property losses, should be compensated to others, or to pay for the fire for no reason is also a grievance, and like the aging of the circuit, such problems also often occur, so when using electricity, we must be careful, careful and careful through the fire caused by the aging of the circuit, we must investigate in time, only we take precautions in daily life, to avoid fires.

With the advent of new energy, some cars are now more than ordinary through charging to achieve environmental protection, such as oil and steam cars will appear less in our field of vision, because we want to protect the earth, protect the environment of nature, as far as possible, the use of clean energy electricity, will be relatively more environmentally friendly and convenient. However, through the circuit charging, there are some troubles in our lives, that is, the car can not always stay next to it in the process of charging, but people have been staying there, which is obviously an impossible thing, so when testing and charging, how can we ensure that there will be no accidental leakage or electric shock?

Especially like these consumer charging piles, must be regular, there are professional maintenance personnel to detect its circuit problems, every once in a while to hand over a professional maintenance personnel, in the charging pile for testing and maintenance of the bridge, so as to ensure that the charging pile will not produce leakage, thus causing this phenomenon of fire, if there are people in the car, such consequences will be unimaginable.

System overload, overload caused by short circuit can be reflected at the first time. Reduce ignition points and reduce losses.

I think this kind of uh, fire alarm system is an advantage, because now many people pay attention to fire protection, but also pay attention to some home alarm systems, so this is an advantage.

1.The alarm accuracy is high.

2.Real-time identification of alarms.

Based on intelligent analysis and deep learning neural network technology, the smoke and flame in the monitoring area of the charging pile can be monitored in real time, and the alarm information can be displayed in the monitoring client interface, and the alarm information can also be pushed to the mobile terminal.

3.All-weather operation, stable and reliable.

4.Alarm storage function.

It is an effective monitoring means to achieve fire perception and early warning.