What should I do if the watch of the king of heaven is flooded, and what should I do if the dial of

1. The mechanical watch should be treated immediately after entering the water, and the commonly used treatment method is: if there is only a little water vapor in the watch, then dry it, put the watch face inward, the bottom shell facing outward, and wear it on the wrist, and the water vapor can be eliminated after two hours. Or wrap the watch tightly with several layers of toilet paper or flannel cloth that is easy to absorb moisture, place it about 15 cm near a 40-watt light bulb, and bake for about 30 minutes, and the moisture in the table can be eliminated.

Do not bake the watch close to the fire, so as not to deform the watch by heat, which may also affect the accuracy of the watch. You can also use a desiccant to dry the watch, for example, you can use granular silicone to put it in an airtight container with the watch that has accumulated water, and after a few hours, take out the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

2. If the water ingress is serious, it is best to send it to the watch shop immediately to remove the water in the meter, because if there is too much water in the mechanical watch, there is no way to dry it in time by adsorbing it from the outside or drying it. The internal structure of the mechanical watch is very complex, and non-professionals cannot open the cover at will, so it is necessary to ask professional maintenance personnel to remove the moisture of the movement with professional repair methods to avoid rust of parts and components, and ensure that the accuracy and life of the watch are less damaged.

3. Even if it is a waterproof watch, it can only have a year's waterproof guarantee, because the waterproof ring of the watch will be tired after a whole year of wear and tear, plus sweat, dust and other inevitable external factors, so it must be replaced with a new waterproof ring after one year, otherwise it will not have the function of waterproofing.

Hello, glad to answer for you.

Daily repair methods for water ingress in the watch:

1. Dry the granules with silica gel. If water enters the case, you can use a granular substance called silicone to put the watch in an airtight container with the waterlogged watch, and after a few hours, remove the watch and the water will disappear. This method is simple and economical, and there is no damage to the accuracy and longevity of the watch.

The silica gel that has been absorbed many times can be dried at 120 degrees for several hours, and the water absorption capacity is renewable, and it can be used again and again.

2. Bake with a light bulb. If the water ingress is not serious, but there is a layer of fog in the surface glass, then you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, and bake it at a distance of 15 cm from a 40-watt light bulb for about 30 minutes to eliminate the moisture. Do not bake the watch mask directly close to the fire, so as not to deform the watch by heating.

3. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe. (It is not recommended to use the above methods to deal with it, it is recommended to go to the after-sales center for maintenance).

If you find that the watch is flooded, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it about 15 cm near a 40-watt light bulb, and bake for about 40 minutes, and the water vapor in the watch can be eliminated. Do not bake the watch directly near the heat, so as not to deform the glass by heating. Because although there is no moisture on the dial, there may still be water in the movement, and the movement will rust and cause damage to the movement after a long time.

After the watch is flooded, it is recommended to find a professional repair outlet as soon as possible for the master to check and deal with it, which can reduce your unnecessary losses.

It can be repaired, and the repairer can blow dry the internal parts.

The following methods can be taken for the water intrusion treatment of the watch:

Method 1: Put the granular silicone into a closed container with the watch that has accumulated water, and after a few hours, take out the watch, and the water will disappear. This method does not damage the timekeeping and components of the watch;

Method 2: Lamp baking method: Wrap the watch in water with a paper towel, put it at about 15 cm near a 40-watt light bulb, and bake for about 30 minutes. Never roast over fire;

Method 3: Put the surface face inward, the bottom shell facing outward, and wear it on the wrist, and the moisture can be eliminated after two hours. If the water ingress is severe, it is best to immediately send it to the watch shop to wipe the oil and remove the moisture from the movement to avoid rust on the parts.

It is advisable not to go to an unofficial Rolex watch shop to have it repaired. Be sure to go to a regular Rolex watch customer service center to get it repaired, which will save you a lot of unnecessary trouble

If you can, send it to the place where the watch is repaired first, so that a professional person can take a look at it.

It is recommended to go to the repair shop, it is not easy to get it yourself, and if you disassemble it yourself, you will not be given a warranty.

Hello, I recommend that you go directly to the relevant after-sales service center to deal with the internal water ingress of the watch, because the internal water ingress will be associated with a lot of internal parts, which is quite troublesome to deal with, and professional things should be done by professional people. You can also click on my homepage to consult and understand the after-sales service, and deal with the degree of water ingress in your watch to ensure that the watch is in good condition. It can also avoid unnecessary troubles caused by unfamiliar table structure when you operate independently.

Feel free to consult 4000562678

**It depends on the brand and damage of your watch, and it is generally necessary for the master to check the physical object before you can give a final**.

When the quartz electronic watch is damp, you can take a few small pieces of calcium chloride and wrap it in gauze; Then open the lid of the electronic meter, put the wrapped calcium chloride and the electronic meter into an airtight plastic bag or glass bottle, and seal it. Generally, it takes about 3 hours to remove the moisture and restore the electronic watch to normal. For the table with severe moisture, the moisture absorption time can be appropriately extended.

When an ordinary mechanical watch is damp, it can be pressed on the watch with dry cotton, and then baked with a 40-watt light bulb for 5 minutes, and all the moisture in the watch can be evaporated.

We wish you a happy life

If it's just a small amount of mist, it will go away on its own over time, or you can bake it under a light bulb, but don't bake it over the fire. Or you can put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the water vapor can be eliminated after two hours. If there is a lot of water and water droplets can be seen, you should find a professional repair office for maintenance as soon as possible.

If the ordinary mechanical Tianwang watch is damp, you can use dry cotton to press it on the Tianwang watch, and then bake it with a 40-watt light bulb for 5 minutes, and all the moisture in the watch can be evaporated. If the quartz electronic Tianwang watch is damp, you can take a few small pieces of calcium chloride, wrap them in gauze, and then open the electronic watch cover, put the wrapped calcium chloride and the electronic watch into a plastic bag or glass bottle that does not leak, and seal it. Generally, it takes about 3 hours to remove the moisture and restore the electronic watch to normal.

For the table with severe moisture, the moisture absorption time can be appropriately extended.

This depends on what commitment there is when you buy, if this watch is not afraid of water, then you can find after-sales to solve it, or if the watch you buy is still under warranty, then you must give it free maintenance, and take the shopping invoice to find after-sales processing.

It can be repaired during the warranty period! After the warranty, it is calculated separately, and the water ingress belongs to the artificially charged money.

When a quartz watch is flooded, it will cause damage to the electronic components and is not of much repair value.

I will guarantee it during the warranty period!

First of all, let's take a look at the degree of water ingress in the watch: it may be that there are water droplets condensing in the watch glass. It could also be that a large number of water droplets are visible on the glass and dial of the watch.

It may also be that there is fogging in the glass of the watch, or it may not be at times, especially when the temperature difference is large. According to the above water ingress of the watch, what should I do if the watch accidentally gets water, you can use the following methods to solve the problem of what should I do if the watch gets water:

Method 1: What to do after the watch is soaked in water, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it near a 40-watt light bulb (about 15 cm), bake for about 30 minutes, and the water vapor in the watch can be eliminated.

Method 2: Put the watch in the rice jar and bury it deep in the dried rice for a period of time, if it is fast, you can see obvious results in one night.

Method 3: What should I do if water enters the watch? You can also use a granular substance called silicone to put it in an airtight container with the watch that has been flooded, and after a few hours, remove the watch and the water will disappear.

Method 4: Take a hair dryer to dry, and then apply a layer of transparent nail polish to avoid impurities from entering and prevent rust.

Method 5: If there is water vapor in the watch, you can put the watch face inward and the bottom case outward, and wear it on the wrist to eliminate the water vapor in two hours. If there is too much water in the watch, the case must be opened and scrubbed. If you are not sure to deal with it yourself, you should send it for repair in time.

A1The easiest way is to put the watch in a rice jar and stand still for a day, and the mist of the watch can be sucked away. As long as you have rice at home, you can easily do it. Secretly tell you that Brother Hand used this trick when his mobile phone was flooded.

2.Similar to the rice cylinder drying method, the humidity absorber is regenerated with silica gel desiccant or the camera is used electronically. In the same way, put the watch and the silicone granular desiccant or moisture absorbent card in the same airtight container, and after half a day, you can take out the watch.

The advantage is that it absorbs water quickly, and the silicone desiccant and the hygroscopic card can be used repeatedly without affecting the performance and accuracy of the watch, making it a good choice.

3.Light bulb method. Wrap your watch in toilet paper or absorbent flannel and bake it four or five centimeters away from a 40-watt light bulb.

But remember, never bake the watch against the fire, because uneven heating or too high temperature can easily deform the case or cause damage to the parts! But in fact, Brother Hand still doesn't recommend using this method, after all, you are in a humid state to contact an energized bulb, there is a certain risk factor, use with caution!

4.Dry with a hair dryer, but use a low-speed, mild wind to dry slowly, otherwise it is very easy to damage the parts, and blow until the moisture on the glass disappears.

5.In the most serious case, if the above methods cannot completely remove the water, then it should be sent to a professional after-sales maintenance treatment to wipe the oil and remove the moisture of the movement, so as to avoid oxidation and rust of the parts and affect the life of the watch.

The question I asked was an Omega watch, it snowed yesterday, I played in the snow for an hour, and then the water beads fogged, I am now using a hair dryer to slowly blow on the low gear, blow the back cover, is this method correct?

The question is still the watch I bought, it's a fake.

How do you explain this table?

Now many fake watches say that their watches are 316 steel shells, but in fact, the workmanship is very rough, the polishing is not smooth enough, and even some will cut their hands. Honestly, you're going to be laughed at.

The workmanship of the ** watch is very delicate and exquisite, and the polishing is also very round and smooth, giving people a sense of nobility.

If it is too cheap to watch it, you should pay attention to the fact that two thousand yuan a Rolex water ghost or Omega kind is mostly an imitation watch without identification.

Question: What do I want to ask, can the water ingress in this way prove that it is a fake watch, and the real watch will not enter the water?

Question: Is it right for me to play in the snow like yesterday?

Watch water ingress:

The first method: bake with an incandescent lamp Wrap the watch with water and wrap it in several layers of paper towels, then place it at 15 cm of a 40-watt incandescent lamp, bake for 5 minutes, and the water vapor in the watch can be evaporated. Remember not to bake for too long, and for watches with leather straps, the strap should be removed first.

The second method: put it together with the desiccant.

The water absorption effect of desiccant is much better than that of rice, put the watch and desiccant together, wrap it in plastic wrap, wait for 24 hours, and it will not cause dust pollution.

The third method: put it in rice.

Rice has a good water absorption effect, and every family has rice, and it is easy to use. After 24 hours of placing the watch in the rice, most of the water is absorbed. Finally, take out the watch and gently wipe off the rice dust.

The fourth method: reverse the watch.

In order not to disassemble the watch, you can wear the watch upside down, wear the watch glass on your arm, and discharge the water vapor in the watch little by little.

Generally speaking, there are only three places where water can enter the watch movement: the handle (handle), the watch mask and the back cover. The waterproof device is also installed in these three places: add a rubber ring to the shank, add a rubber ring on the threaded edge of the back cover of the sealing ring, shank and other parts, and make the surface tight.

Water and fog into the watch has the greatest impact on the watch movement, and it should be dealt with in time to prolong the service life of the watch. If not treated in time, the residual moisture will easily cause the internal movement to oxidize and rust, resulting in inaccurate watch timekeeping and watch failure.

If the watch is seriously flooded, please send it to the repair center immediately for treatment, otherwise it will cause many metal parts inside the movement to oxidize and rust due to water vapor, causing greater damage.

International Trade Store: Room 1102, Block D, Bloomage International Center, No. 6A, Jianguomenwai Street, Chaoyang District, Beijing.