There is a problem after the computer is reinstalled, and there is a problem with the computer

After your driver is installed,Look at the installation directory,Find the installation directory in the installation file,In my computer - properties - device management - find the sound card - update the driver - from the list - under the installation,,If it doesn't work, choose not to search - install from the disk - select this should be OK。

I think there is a problem with your sound card**, listen to you, you are also a hobbyist, and there should be no possibility of installing the wrong one, so I think it is you**Version error, please carefully check the stamen of the sound card, and then re** on the Internet**, you can also tell me your motherboard model, I will give it to you**

It is possible that the sound card has forgotten to be installed, and it is recommended to re-drive the installation of the sound card.

I'm having this issue with my computer as well!

1。Your sound card model doesn't match!

2。It is possible that you have damaged the movement of the sound card when you installed it.

If the movement comes back, you can only repair it or replace the motherboard!

3。From the mounting system.

Yellow means that the driver is installed, but there is a problem with the installation and cannot be used normally.

You can remove the sound card driver and install it again, and that's it

Your drive is not properly installed.

The sound card is not installed.

It is recommended to reinstall it.

If the first floor doesn't solve your problem, the only, and best way, is to reinstall the system.

Driven by a driver disc mounted sound card.

Buy an XP system CD, then start the computer and enter the CD point to automatically install Windows

XP,Then don't worry about it,Wait for the system to automatically start 2 times,The system is installed,The general driver can be installed,Note that before doing the system,Copy the useful things on the desktop to the E disk or F disk,After doing the system, the original things of the C disk will disappear。

Reinstall the system? Power on, press the DEL button to enter the BIOS, change the boot to the optical drive, and then F10

I choose y to save. That's it, try it automatically!

1. The standby button is gray and cannot be clicked, depending on what version of the system you are installing is automatically set to block this function. This should be changed in Local Group Policy. or other disks with viruses that have been maliciously altered during installation (it is recommended to disinfect the entire disk after installing the system).

2. The screen wave should be that the graphics card driver is not installed, or the hardware acceleration is not adjusted to the full. Desktop right-click properties - Settings - Advanced - Troubleshooting.

3 Always auto shutdown should be something wrong with your hardware. Mainly focus on memory (from plugging and unplugging, changing slots), power supply, graphics card (whether the fan rotation is normal), CPU heat dissipation (whether the CPU fan is abnormal), case dust (cleaning dust), motherboard (whether there is a burning smell, or capacitor leakage).

It is better not to use this kind of system disk. Find a pure installation disc that doesn't bring so much mess. The standby gray is estimated to be the trouble of this disk.

Have you installed the graphics driver? Use the drive disk of your graphics card to install it, and it will definitely not fluctuate after installation.

It's okay to check everything, but you have to get all the important documents out first.

Virus!! Legendary Shockwave!!

It is recommended that you format the entire disk and then reinstall the system.

It is time to replace the host CPU fan, or there is too much dust, which affects the automatic shutdown caused by heat dissipation, it is recommended to replace it!! In the long run, the processor will burn out.

After reinstalling the system, the first standby should be gray, and this reboot turns yellow.

I suspect that your machine does not dissipate heat well, it should be caused by the CPU temperature being too high. You can test it with Master Lu. Open the case and see if the radiator buckle is not buckled properly. In short, I think it's the CPU temperature that is too high.

Test if there is any problem with the graphics card

If the computer wants to work normally, it needs the cooperation of software and hardware, and the software is the operating system and storm audio, Qianqian Jingting, word, etc. Hardware is the CPU, motherboard, graphics card, sound card, etc. in the computer case. The hardware requires a software driver to work properly in the operating system.

The operating system does not include all software, so after the system is reinstalled, in addition to the software you said needs to be installed, you also need to install hardware drivers, such as motherboards, graphics cards, and software drivers for sound cards.

The important problem you mentioned is actually the phenomenon that the graphics card driver is not installed, not the damage of the parts.

Buying a computer generally comes with a motherboard driver and graphics card driver, and it is OK to install the motherboard driver and graphics card driver on the monitor according to the manual.

First, make sure you have all the drivers installed, and then install the application. Word documents need to be opened by office, and movies need to be opened by **. If it's an LCD monitor, the driver will default to the best resolution, and the flat screen display is 1024*1280*1024

There is also a refresh rate of 85hz

Maybe the virus isn't clean.

1: Can't enter the system. After reinstalling the system disk with the xp Chinese simplified Chinese version, a lot of things on the desktop are lost, such as storm video and thousands of quiet listening, etc., and the teaching software in the computer such as word excel powerpoint cannot be opened (this is inevitable, because your system is formatted by the system disk when reinstalled, so the software inside the system will be missing after reinstalling the system, so all must be reinstalled).

3: The most important thing is that the computer font has become very large, the resolution is at the lowest value on the left, if you want to adjust it to the highest value on the right, the computer will show overclocking, and it can only be adjusted to a certain position in the middle, but the display is still very blurry (this is the driver of the graphics card is not installed, when you buy the computer, there should be a CD with the driver, and your computer should not have sound now).

In this way, you can try it, just click Start Menu, then click Run, enter msconfig in it, and then remove the tick in front of stacsv in the Start column and then click OK to exit without restarting.

The system you use is not pure enough, it is better to use another one, I recommend the deep xpsp3, it is very pure, and it runs in good condition (I have been using it, both computers have been installed for three years and have never been reinstalled).

Check what directory it is, and uninstall it if it doesn't matter.

msconfig is that you can change the startup item, but I don't know what the software is the problem, and there will still be a problem when you use it in the future.

Since it's HP's, you have to get a full set of drives and reinstall them all over again.