Can my computer be connected to both wired and wireless networks at the same time?

Yes, but the laptop will only select one network.

Notebooks are easy to carry and bring a lot of convenience to our work and life. However, when the laptop is connected to both wired and wireless networks, the system will give preference to using wireless networks. In this case, if you are using a wired network, you must disable the wireless card, and if you need to use the wireless network in the future, you must re-enable the wireless card.

1. Because the speed of your wireless router is 54Mbps, the speed cannot reach the bandwidth of the wired network cable, so when you connect wirelessly, the speed can only show the peak bandwidth of the wireless router, that is, 54Mbps; When you connect the network cable, it can display 100mbps.

2. If your power operating system is win7, you can connect wired and wireless at the same time, the system will automatically do load balancing, improve access bandwidth, win7 or less system, such as XP, it will not work, no effect.

3. Mbps means how many megabits of data transmission per second.

Resources. System City. System City [citation time: 2018-1-14].

It will not speed up, and it can connect two at the same time, but the traffic used is one of these two (for example, the computer uses wired traffic, and the wireless is also connected at the time but will not use the traffic, on the contrary, the computer is using wireless traffic, but the wired one will not consume) as shown in the figure.

Look at the packets received (traffic) and then look at the figure below.

After a few seconds the packet changes.

It was found that the wireless network connection had more packets, while the local connection remained almost the same.

The computer can be connected to the wireless and email networks at the same time, but it cannot be used at the same time, and can only be used in one way to access the Internet.

How to connect the computer win7 to the wireless network.

360u30337574822018-04-06 13:19With the development of the information age, computers are becoming more and more popular, and most computers are still using win7 system, so how to connect the computer win7 to the wireless network?

Method. <>

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Please click Enter a description.

Hello, I can connect two at the same time, but the traffic used is one of the two.

1. For connecting network cables, the equipment must have a network cable interface, commonly known as network port.

Use the network port to connect to use the network! For wireless wifi, as long as the optical modem network port is correctly connected, the router, computer, TV, mobile phone, tablet and other mobile terminals can be connected to wifi as long as there is a wireless network card! Relatively wired, wireless wifi is more flexible and convenient!

The network speed is determined by the rate of broadband and the optical modem and router, and has nothing to do with wired and wifi! But for wifi, it will be affected by the outside world, resulting in a drop in network speed!

2.differences in signal interference;

Most of them are using the wireless waves of the frequency band when surfing the Internet through wifi, and the number of transmitters and receptions of the same frequency band models around us is much higher, which can directly lead to the decline of our wifi network speed and make our experience worse!

Devices that can directly affect us are mobile phones, wireless bluetooth headphones, microwave ovens. and other electrical appliances can have an impact on wifi! The routers in our vicinity can also have an impact on our routers.

Compared with network cables, electromagnetic waves do not cause problems. The network cable is relatively insulated, and there is a skin for pit interference protection! It can be very good and resistant to electromagnetic interference!

3.the difference between signal attenuation;

For wifi, when encountering load-bearing walls, obstacles will cause signal weakening, and metal will reflect! When we are far away from the router, it will also affect the WiFi experience, and the distance of the electromagnetic waves emitted by routers of different power is also different!

It is recommended that you place the router in an open or high position, which can effectively reduce the blocking of obstacles, and if the room is placed in the center of the room, this can effectively reduce the wifi blind spot!

Yes, in general, the Windows system has priority wireless connection by default, and if both ways can be networked normally, then the wireless connection will be prioritized.

No, unplug the network cable and use a wireless network card to connect to the wireless wifi

It will not speed up, and it can connect two at the same time, but the traffic used is one of the two (for example, the computer uses wired traffic, and the wireless is also connected but does not use the data, and the computer is using wireless traffic, but the wired one does not consume).

Look at the packets received (traffic) and then look at the following diagram after a few seconds the packets change.

It was found that the wireless network connection had more packets, while the local connection remained almost the same.

You may need to unplug the network cable to connect to the Wi-Fi.

See if your router is connected to the Internet