When setting up the Tieba signature file, the entire web page will be stuck, what should I do? 10

It's a little bit of the signature file on the whole page will be covered with a layer of white.,After refreshing, the original signature is still there, that's not a card, it's clouded because a dialog box to change the signature pops up.,And that.。

===Method 1********************==

1.Start by clicking on the content box for replying to the post.

2.Then there is the username below the content box, and the signature file below the username.

3.There is a View All next to the signature file option, click on it.

4.After opening, there is a set of signatures to add.

5.Click and enter the address into the address bar.

6.It will be displayed when it is reviewed.

====Method 2********************===

1.In the top right corner of the post bar, have your username and click on it.

2.There is a column on the page after clicking, and then click (My I Sticker).

3.There is (personal setting) on the right side of the page entered, and I click.

4.After entering the page, there is a navigation bar, and you can see the signature file settings.

5..After opening, there is a set of signatures to add.

6.Click and enter the address into the address bar.

7.It will be displayed when it is reviewed.

********************end*************************

**Link. If it is your own**, please upload it to your own space and click **, view, and then there is a copy ** address in the lower right corner, and use the above steps to add the signature file after copying.

That's not a card

It's clouded because there's a dialog box that pops up to change your signature, and that dialog is at the bottom of the window, and you don't see it, and you think it's a card, just move it down and you can see it

Well, in fact, sometimes it can be classified as a problem with network speed and degree of acceptance=a=

Press F5 a few more times and try it, I do that sometimes.

Either press f5 or restart the browser, anyway, please try it=a=

You can go to "My i" and click "Personal Settings" in the "My Paste Bar" to find and add a signature file. Upload ** to the space album in advance, and then click to open**copy the link address**, and then add it to the Tieba signature file settings. After adding the signature file, the system needs to review it, and it can be used after the review is passed.

However, it must be more than three months old!

1. Prepare a ** on your computer first.

3. Find the Tieba settings in the upper right corner of the homepage of the post bar.

3. After clicking, enter the basic information, there is a signature file setting next to it4, click to add a signature file, paste the copied link into this window, and wait for the review to be successful.

Limited to the use of stickers, the space of **.

In fact, there is a very convenient way, which is to open a post casually, insert your favorite signature file in the recovery bar**, right-click the attribute to copy the link, and be careful not to send it out (it's okay to send it out).

The last point is OK.

Or maybe it's the reason for the stuck, just refresh it a few times.

Hehe, it's a bit of a problem. I'm setting up the signature the same as you. Later, someone told me to turn the computer back on, do nothing, first set up the signature, sometimes the computer malfunction can happen, and then I turned on the computer to go high to sign, only saved twice, and then submitted, after a while it was approved.

Have you changed your signature file to a new one, and the previous signature file appears as "**deleted" in the post? Or when you delete the signature file, you click delete but it's still there?

The signature file can't be deleted: refresh first, restart the browser after it is invalid, or restart the computer after it is invalid, it still can't be deleted, just go to the post bar to give feedback, and the administrator will investigate.

Let's try it again after posting it in the post bar. No, ask me again.

Your space has been upgraded to the new version.,Try to remove the h at the front of the link and try again.

Network problems or your computer is poisoned.

Hello

Hey,Du Niang's various heresies emerge in endlessly,Wow,Let's see if your** meets the requirements for setting up a signature file.,If not, just change**Try it again Insist on using the original picture.,No way.,You can only go to the post bar feedback bar and post for help with the official to help you solve the post bar abnormality.

How to set up the signature file of the sticker?

As long as your ID has been registered for three months, you can set up a signature file. Up to five sets of signature files can be set up, and the size of each set of signature files cannot exceed 1m

Up to five sets of signatures can be set, and the total size cannot exceed 5m

The signature file you just submitted may take a certain amount of time to be reviewed, please wait patiently (the time is generally about one day) After the review is completed, you can use the new signature file when posting!

The maximum size of the sticker signature rental is 500x200 (width x height).Static ** such as (*.) can be usedjpg format), which can also be used as a moving image. (e.g. *.)Animation in GIF format**).

Good luck <>

1.Go to Tieba and log in to your username.

2.Go to "My i Sticker Bar Slippery Shelter".

3.Move the mouse to "Settings" on the right side of the interface, click "Signature File Settings" in the personal settings bar, and you can modify the signature file name and ** link in the pop-up dialog box. Click "Submit" successfully.

Note: 1 The signature file only supports the **library and space** of the post bar, you can upload the ** to the "My Space Album" first. 2 When copying the link in the space album, you need to click the "Copy Address" option in the above options, and it is wrong to copy "**" directly.

4.If you want to add a set of signature files, you can click "Add a set of signature files" to see the pop-up signature file page. Up to 5 sets.

Note: Up to five sets of signature files can be set, and the size cannot exceed 5m

5.Enter the name you want in the name input box, enter the link in the link field, and you can see the selected one in the preview. After clicking Submit, the signature file is successfully submitted.

6.The signature file you just submitted may take a certain amount of time to be reviewed, please wait patiently (the time is generally about one day) After the review is completed, you can use the new signature file when posting!

7.The prerequisite for using the signature file is that you must be a user who has been registered for more than three months (three months is also acceptable) before you can use it.

8.The maximum size of a signature file is 500x200

9.Motion graphics are available!

HelloThe prerequisite for using the signature file is that the user must have been registered for more than three months (three months is also acceptable) before it can be used.

Steps to set up a signature profile:

1.Go to Tieba and log in to your username.

2.Go to "My i Stickers".

3.Move the mouse to "Settings" on the right side of the interface, click "Signature File Settings" in the personal settings bar, and you can modify the signature file name and ** link in the pop-up dialog box. Click "Submit" successfully.

Note: 1 The signature file only supports the **library and space** of the post bar, you can upload the ** to the "My Space Album" first. 2 When copying the link in the space album, you need to click the "Copy address" option in the above option, and it is wrong to copy "**" directly.

4.If you want to add a set of signature files, you can click "Add a set of signature files" to see the pop-up signature file page. Up to 5 sets.

Note: Up to five sets of signature files can be set, and the size cannot exceed 5m

5.Enter the name of the signature file you want to count in the name input macro box, enter the link in the link field, and you can see the one you selected in the preview. After clicking Submit, the signature file is successfully submitted.

6.The signature file you just submitted may take a certain amount of time to be reviewed, please wait patiently (the time is generally about one day) After the review is completed, you can use the new signature file when posting!

7.The prerequisite for using the signature file is that the user must have been registered for more than three months (three months is also acceptable) before it can be used.

8.The maximum size of a signature file is 500x200

9.Motion graphics are available!

The level is not enough, it seems to be level 8.