What are the conditions suitable for car dent repair?

Is that part dented? Door skin? Front and rear bars?

Fuel tank? Not clear about your question. If it is iron, it is partially dented.

Restoration requires sheet metal and painting. For three days, it is calculated that the resin part is dented if it is a large area. Tree welding and painting are required.

3 days if the internal parts are dented. Non-repairable direct replacement. 1 day.

If it is an imported super high-end car, there is generally no sheet metal and painting. They are all directly exchanged for documents.

1. Car dent repair is non-damage repair, so first of all, the car dent that has been painted, even if the dent can be restored, but the paint cannot be repaired. However, car owners should never think that the dirt on the surface of the body is paint peeling, this situation is still very common. If the paint is a little bit, we still recommend that the car dent repair is better, we have a variety of colors of paint pens, can help you paint treatment.

<>2. People often think that small car dents or large car dents are suitable for car dent repair, and the body dents on the ridge line cannot be repaired, but the answer is that they can be repaired perfectly, but the smaller the better.

3. There are times when the car depression repair can not be done, that is, it encounters serious damage and deformation of the sheet metal edge, which is not done, and there is also a particularly sharp medium and large depression, which has stretched the sheet metal at the time of impact, so it can not return to the original plane, and after the repair, it is either a gentle depression, or a gentle bulge. Different sharpness also has a great impact on **, which can be referred to the official website**.

It's frustrating when people sit in their cars and prepare for their trip to the garage only to find that the engine won't start. However, sometimes, the engine cannot start, just due to some minor problems, if you understand these reasons, understand these basic knowledge of car repair can solve the basic problems as soon as possible. First of all, it is necessary to check whether the distributor, spark plug, high-voltage wire, etc. are damp because of the rain of the car, if so, you can dry the damp parts before starting.

Secondly, check if the spark plug is damaged, and if it is, just replace it with a new one. Third, check whether the battery voltage is sufficient. Sometimes, when you forget to turn off the lights when you stop the car, you may run out of power after a long time.

If so, put the car in second gear, step on the clutch, drag it with the car (generally not recommended, it is best to find someone to push it), when driving to a certain speed, release the clutch, twist the ignition switch (generally not recommended, the ignition switch should be turned on the ON gear before pushing), and the car can start. If there is a problem with the generator, this method will not work.

The engine stalls when shifting gears.

Shifting gears while on the move, if the operation is standardized, but the flameout phenomenon occurs, the following problems need to be checked:

First of all, see whether the idle speed is stable, whether the idle speed is too low, if the idle speed is unstable or the idle speed is low, as long as the idle speed is adjusted to the normal speed. Also tighten the idle shut-off valve and plug it tightly.

Secondly, if the idle speed is normal, it is possible that the carburetor is clogged and needs to be cleaned at a professional repair station.

The steering wheel flutters at high speeds.

The reasons for the unsteady driving, head swinging, and even steering wheel shaking of the car at high speed or at a certain high speed are as follows:

1. The positioning angle of the front wheel is inaccurate, and the toe is too large.

2. The air pressure of the front tire is too low or the tire is unbalanced due to repair and other reasons.

3. The front spokes are deformed or the number of tire bolts is different.

4. The installation of transmission system parts is loose.

5. The transmission shaft is bent, the power is unbalanced, and the front axle is deformed.

6. Shock absorber failure.

When there is no damage to the car paint, you can do not all the dent repair, according to the severity of your dent to be aware.

The repair of car body dents is of course reliable:

1. Everyone thinks that this technology is very simple, it is indeed easy to enter the industry, it is really difficult to really do a good job, the market is still in a downturn in the country, many people do not understand this technology, and there are many people who rely on the gourd to draw scoops, coupled with the early closed repair, so that this industry is very limited, and the car dent repair technician who can really be called a master is one of the few in the country, and the car dent repair technology is generally repaired by the master, and there is no problem from the front. When the light is relatively strong, or when the hand is waiting, Zheng Tuanxi can see slight depression marks from the side;

2. Under the strong light, it can be seen that the lacquer pattern arrangement of the depression has changed. The master with the highest level of technology, except for the naked eye, can not see any problems, the repair of the place of lacquer arrangement, and spacing are the same. Therefore, the most practical method is to move back and forth from the sunken side eye under the illumination of the lamp board to observe the direction of the lacquer pattern and whether it is evenly arranged;

3. Therefore, the car dent repair is not simply related to the situation of the dent itself, but also related to the ability of the master to repair it, so don't blindly pursue low-cost repair of the dent, the most important thing is to see the effect! After all, each master has different requirements for himself, the repair effect is good and bad, and the real repair is the same as the original car paint, it is not a matter of time, it is experience and understanding. Therefore, when you repair it, you must choose a well-known local car dent repair shop, small shop, backpacker, which is really unreliable, and the asking price is not low.

Millions of car purchase subsidies.

Here's how to fix the car if it's dented:

The first method is to heat it with hot water and flatten the recessed part yourself. Boil a large bucket of hot water first, then heat the hot water with a spoon to the recess.

After the plastic is heated to a certain extent, push it out on the back of the concave surface by hand until the concave part is convex and recovers. If it is hard to the touch and still can't come out, it proves that the heating is not in place, and a large amount of hot water is needed to continue heating.

The second method: buy a dent repair kit online. Clean the recessed part first, then put a few things that resemble toilet suction cups in the grooves, insert a suction rod into these suction cups, and pull the suction rod firmly.

The principle of this method is that after the suction cup touches the metal plate of the groove, the inside is in a vacuum state, and a huge pressure difference between the inside and outside will occur. At this time, if you pull hard, the metal plate groove will be sucked out.

This method requires enough strength and the ability to find the power point to have a good effect.

There are many ways to repair the car depression, which can be directly splashed with hot water through the principle of thermal expansion and cold contraction, and the depression can be done with hand top or pry bar; You can also use a hair dryer to heat up, and the two of you can heat it up while squeezing it to restore the sunken area.