Computer Masters !!! I m going to crash!! Depressed

It is possible that the application failed to check the memory allocation, or that the application has referenced an abnormal memory pointer due to its own bug.

Solved: 1 The memory module is broken and the memory module is replaced.

2 Dual memory is not compatible Use the same brand of memory or only one memory.

3 Memory quality issues Replace the memory module.

4 Heat Dissipation Enhancement of heat dissipation inside the case.

5 The memory and motherboard are not plugged in properly or other hardware is incompatible, reinsert the memory or change the socket.

6 There is a problem with the hardware to replace the hard drive.

7 Driver Problems Reinstall the driver, if it is a new system, you should install the motherboard driver first.

8 Software Corruption Reinstall the software.

9 Software bugs patched or updated to the latest version.

10 Software and system incompatibility Patch the software or try the system's compatibility mode.

11 Conflicts between software and software If you have recently installed any new software, try uninstalling it.

13 Virus Problems Antivirus.

14 Antivirus software conflicts with the system or software Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

15 There is a problem with the system itself Sometimes the operating system itself will also have bugs, pay attention to install the official release of the update, such as the SP patch, it is best to put it. If that doesn't work, reinstall the system, or replace it with a different version of the system.

There may be file corruption reinstall it a bit.

This is a standard drive problem, which can be solved by simply reinstalling the driver.

1、This 9600GT is a brush with other cores (that is, a fake card),If that's the case,Then you only have to use GPU-Z to see the code name of the display core,And then according to this code name** The corresponding driver is installed。

2. If the graphics card is damaged or in poor contact, you should first clean the gold finger and heatsink of the graphics card, and then install it.

If the graphics card driver is damaged, delete the existing graphics card driver in the device manager, and then insert the disc to automatically find and reinstall it.

Analyze: The reason for the first occurrence of "the display screen suddenly has a small ** sound and burnt smell" is that the display has a short circuit or other fault, which causes a fuse in the display to burn out, and at the same time causes the air switch at home to trip.

After turning on the monitor for the second time, it will inevitably break because it bears the overload current without insurance, so it directly acts on the main power switch.

It is recommended to replace the air switch at home, turn on the household appliances in turn, see if there is a trip reaction, if not, try to turn on the host, do not turn on the monitor, if there is no problem, then you can replace the monitor.

The line inside the display frequency is short-circuited. It should be the display screen burned.

Is the display a tube, if it is possible that there is a hardware problem inside the display or a problem with the power supply of the host, the high-voltage discharge of the tube display will destroy the power supply of the host, in short, there is a short circuit in the two machines.

Our Comrade Xiaoxian, estimated. It's a tendon that is out of place.

In other words, there is a problem with the total power supply in your home, or you have too many power requirements to turn on something, and it trips instantly, which is a tragedy (this possibility is zero).