Hello, what s wrong with the computer monitor ringing all the time

If it is determined that the sound is made by the screen, it should be a hardware failure of the screen, and it is speculated that there is a leakage phenomenon inside. However, I have not personally encountered the sound of the screen, and many times it is the dripping sound of the hard disk, which indicates that the hard disk may have bad sectors. It is recommended to go to the repair point to take a look, and it may delay the matter if it is broken.

If your computer rings every once in a while, it could be for a number of reasons:

First of all, your computer's hard drive may make noise while working. When data is written to or read from the drive, the drive transmits the head and rotates the disk, which generates noise. In some harsh cases, the hard drive will fail and the noise will get louder.

So, if your computer is loud and constant, it may be that your hard drive is malfunctioning.

Secondly, the fan inside the computer can also cause the computer to make noise. The fans inside the computer are mainly used to dissipate heat, and if they are damaged or unbalanced, they can cause the computer to make noise. In many cases, the fans inside the computer also need to be cleaned and maintained from time to time.

The third possible cause is the noise of the computer's power supply. If there is a problem with the power supply of the computer or if it is insufficient, the computer will make noise. In addition, if there is a problem with the computer's motherboard or capacitors, it will also cause the computer to emit noise.

Finally, some external devices can also be the cause of the constant noise coming out of your computer. For example, if you have a faulty printer or scanner connected, they may make noise while running.

If your computer is ringing every once in a while, here are some things you can try to rule out these issues as much as possible:

1.Clean the inside of your computer from dust and dirt and check that the fan is functioning properly.

2.Use the computer diagnostic tool to see if there is a problem with the hard drive.

3.Check to see if your computer's power supply is overloaded or if there is a problem with your capacitors.

4.Disconnect all external devices and reconnect them one by one to determine if they are the cause of the clear or noisy noise.

If you've tried the above methods and still can't fix the problemConsider enlisting the help of a professional to locate and resolve the issue. In either case, it's important to make sure that your computer is functioning properly and that there are no issues.

The computer monitor strip is actually a common fault, and the main reason may be that the circuit board of the monitor is faulty or there is a problem with the circuit connection of the monitor. Specifically, possible causes include the following:

1.Aging or damage to the internal components of the display: Due to the long-term use of the internal components of the display, the aging or damage of parts may occur, resulting in the failure of the display as a slat.

2.Circuit problems such as power supply and interface of the display: Circuit problems of the power supply and interface cables of the display may also cause the sound of the strip to appear.

3.Graphics driver or hardware device issues: The display sometimes shows noise in bar graphics, which can be caused by graphics card driver or hardware device issues.

4.Poor contact: Loose or dirty cables may cause the monitor strip to ring.

How to deal with the problem of computer monitor slat?

1.Replug the cable: First of all, you can try to replug the cable and clean the connection points to ensure that the cable is not loose, dirty, etc.

2.Replace the power adapter: If you find that the power adapter is damaged, you will need to replace it with a new device to ensure a stable and reliable power supply.

3.Check the graphics card driver: Check whether the graphics card driver is normal, if there is a problem, you need to reinstall it, and make sure that the graphics card driver and hardware device match the display.

4.Thorough cleaning of the monitor: Cleaning the monitor thoroughly and removing dust and stains from the surface of the monitor can help remove some of the faults.

In short, for the problem of computer monitor slatting, it is necessary to observe and analyze from many aspects, and try a variety of treatment methods to get the best results. If it still doesn't solve the problem, it's best to contact a professional repairer for help.

Your problem is generally caused by the transformer of the power supply part of the display, because the coil of the transformer is not tightly wound enough and the coil vibration sound is generated, generally we can not solve it, but it does not affect the use and life, you can find js to replace.

Another possibility is that the display expands and contracts in the cold in winter.