-
It is recommended that troubleshooting can be done in the following ways:
If you are using a router, disconnect the router for stand-alone dial-up test first;
If you have a modem device, you need to pay attention to whether the device is overheating, you can turn it off for a few minutes and then restart it.
If the connection drops when running the program alone (compared to if it drops while playing a game), it is recommended to restart the computer to try or reinstall the program;
If the entire network is disconnected, check whether the access cable and the network cable are loose or in poor contact, and try to reseat the line.
Check and filter the disconnection caused by computer viruses and scan the whole disk;
If the problem cannot be solved after the above methods are rectified, it is recommended that you contact the local customer service to report the problem, and our company will check and deal with it for you as soon as possible.
-
This problem may be related to the heavy load of the other party's server, server instability, computer virus, etc. Here's how to deal with it: Step 1:
Check if the fixation** is normal and remove the extension. Please check whether the fixed ** can be used normally, if the ** extension is installed, it is recommended to remove the extension after testing, if ** can not be used, please call 10001 to select the language type, choose 4 (obstacle repair) - choose 2 (fixed ** barrier) to declare the barrier. Step 2:
If it is normal, please check for computer viruses. Step 3: Check the modem line and restart the device In the case of ensuring that a single computer is connected to the Internet, plug in both ends of the network cable connecting the modem to the computer, and then plug in both ends of the ** cable of the modem connection splitter tightly (do not unplug the line), restart the modem, and click on the broadband connection.
-
Plan 1 [New P].
Note [Original]:
1 In safe mode, the effect is even better!
2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.
3.It is not antivirus, and the following methods can be used directly. If it doesn't work, use a high-quality antivirus (e.g. Kaspersky) in safe mode to kill it, and it's best to use 360 Security Guard as well.
Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. )
You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.
One. Close the browser, open the "System Repair" of the new version of 360 Security Guard, and select "Home Repair", "System Repair" and "IE Repair" as a tick (you can also select all.) At least select "System Repair"), and then click "One-click Repair".
Too lazy to install it, just use the 360 first aid kit) .
Then use the 360 first aid kit. [Follow the steps: "Start First Aid" first; After scanning, if a Trojan horse appears, click "Isolation"; Then click "Repair" (you can select all of them to Fix Now".
Next, click on "Recover Lost DLL Files", add the missing DLL files that the system detected during detection, and then click "Repair Now". Repair Network is a case-by-case decision to fix or not. When you're done, you should restart.
Two. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.
Three. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.
You can also consider using the Kingsoft First Aid Kit [After point scanning, if there are items that can be repaired, after selecting all, point repair can be done. 】
Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.
2.When the effect is not good, look at the three points in "Attention". 3.
After that, if the effect is not good, you can also consider system restoration (choose a restore point).
Reason for disconnection: Data terminal ready) The temporary invalidation of the signal will cause the disconnection. >>>More
To find telecommunications, first determine whether it is a network problem of telecommunications; If not, check the virus again to see if it is affected by the virus; If not, it's time to see if there's a problem with the hardware. Let's check it step by step and see what the problem is!
First, the problem of the cat, maybe the cat has a problem, or a try, if it is normal, then buy a new one. >>>More
It is recommended that troubleshooting can be done in the following ways: >>>More
If this failure occurs everywhere the phone is used, it may be a sensitivity issue with the phone's motherboard and related devices. It is recommended to adjust the mobile phone to airplane mode first, and then turn it back, if not, it is recommended to turn off the phone or change the mobile phone for testing, and try to rule out the cause of the mobile phone or card first. Customer service 53 will answer for you. >>>More