Tianyi wireless love X61 notebook use 6633 error, do not reinstall the system can solve the proble

Notebook installation system and desktops are a little slight, but it's also a very troublesome difference Probably more than 5% of the book itself is not integrated SATA driver.

First of all, the notebook uses SATA hard disk, which is different from the desktop, so most of the BIOS options in the book do not have the option to default the hard disk to the IDE.

This means that if your machine's BIOS does not have a default IDE option, your normal installation disk will prompt you to "Cannot find the hard disk" when it is installed.

You must manually install the SATA driver before reinstalling the system with the SATA driver on the system disk.

If you don't know much about computers, please be cautious, if you need to redo it, you can note it to me.

Hope it helps.

Note: Plagiarists, please take a detour, especially the "ID: Disinfection Personnel" who takes plagiarism as a profession How far is the thought, you will roll me as far as you can, otherwise, Brother will definitely wave his sleeves and take away all your teeth Don't you like toothlessness Brother will fulfill you

It's okay, just redo it if you want to call me 413424390 if you have a problem

In addition, there are products on the stationmaster's group **, cheap ***.

Is there a bug with this network?

Or is it a mistake with any software?

It's not a system problem, of course, you don't need to reinstall the system.

It's all here.

The few upstairs are so funny, haven't you used a thinkpad???

Also series ......Model ......If you haven't pretended, don't pretend to be an expert.

A pertinent solution has been proposed upstairs, and I will only add to it.

It is best to find all the drivers before reinstalling the system, because it is possible that the system will not automatically recognize the wired and wireless network cards built into the machine after you reinstall the system. In this way, you can't even connect to the Internet, how can you drive it?

Better tools make good work.

Your laptop has a console number, which is on the nameplate on the back of the laptop.

Press fn+f5,The following picture appears,Then press on,The light of the Bluetooth at the bottom of the screen is on,Mine is so good,Hehee,I don't know if yours is,Try it。

Install power management, FN+F5 turn on the soft switch! (On the premise that the hard switch is turned on), by the way, turn on the wireless network card! Easy to use later.

1.Press del or F12 to power up

2.After entering the BIOS, find the Config and change the SATA to Compatible, that is, the compatibility mode.

3.Press F10 to save the BIOS settings and exit, reboot.

4. Then press F12, select the disc boot, and put it into the disc.

5. Installation.

IBMMbook's method of running light up doesn't need to enter BIOS.,Press the F12 key when you turn it on.,Generally, there are two kinds of disc starts, IDE CD IDE ***,Look at whether your CD drive is *** or CD.。

After saying that the IBM driver is very difficult to find, you can go up and find it yourself, why redo the system?

Install the ThinkVantage fingerprint software, open the fingerprint reader settings in the control panel settings, and tick both boxes in Boot Security.

In this way, it will prompt to scan fingerprints as soon as the computer is turned on, including the boot fingerprint and the system fingerprint.

Install the driver and application software, and set a password for the account.

It depends on whether your computer has that function or not.

Dear users: Lenovo X61 notebook is the wireless switch of the notebook under the lock.

fn+f5

The premise is to turn on the switch of the wireless network, and there is a button that can be pushed back and forth at the bottom of the side of the machine.

I guess it may be caused by the driver.,Generally, when the system is built-in, the driver package comes with.,You can put a driver on the computer, but that's a strong driver.,You can use software like the driver wizard to update the driver to try.。

In this case, consider the BIOS settings first,Ahci mode is changed to IDE,You will know the specific operation of the boot F2,If it doesn't work, then consider heat dissipation,Clean up the vents and fans,Since it's useless to reinstall the system, don't consider it.,Finally, consider the hardware。。。 It is recommended to provide the blue screen **, technical information below. . .

If this kind of ** occurs, it is generally a hardware problem, unplug the memory and clean it up, and try it.

Clean up or replace memory.

How long has it been since you dusted? Clean up the dust.