Why can t I connect to my computer on my new phone? 10

1: Make sure that your cable has been checked on the computer and that the phone is showing the charging status.

2: Open the 360 function interface and tap Phone Assistant.

3: At this time, you can see that your phone and computer are automatically pairing.

4: If that doesn't work, continue to repeat the above operations.

5: If you can't try it for a day, I can only congratulate you, your mobile phone is estimated to be a copycat or a refurbished machine!

Change the computer and put the driver on.

See if your phone is not a phone memory and SD card public memory, if so, it's, my Samsung is.

Use the 360 assistant, change a few more assistants, and restart the computer after the driver.

There are many reasons, first try it with another mobile phone, determine if it is a matter of data cable, then see if it is a driver, and finally see if there is a problem with the computer.

When the data cable is connected, pay attention to see that after the phone is plugged in, the phone slides down, and an option will come out, whether it is only charging, or as a storage disk, at this time, you should choose to be a storage disk, you can link to read the file.

Have you installed the driver? When flashing, it will enter recovery mode,A lot of flashing software will use its own recovery (in fact, it's just a vest),Or recovery mode (black screen state),They are all to be driven,If you don't install the driver,It will prompt that the connection to the phone fails,Flashing terminated! If it's serious, the phone will become bricked, and if it's not serious, install a driver and brush it again, and you'll be fine!

When the phone is plugged into the computer, the phone will be set up. You should be able to set up the way your phone connects to your computer.

The key depends on what kind of mobile phone it is, different mobile phones connect to the computer in different ways, some want to turn on the connection, some want to turn off the connection, some want to choose the connection mode service options on the mobile phone after the connection, etc., if you can see the removable disk in my computer after a variety of attempts, then it's OK, open the transferable ****, etc., if you can't, then only use the card reader to install the mobile phone memory card and connect it to the computer separately.

If it is a Nokia phone, the computer needs to install the nokiapc suite, or when the data cable is plugged into the computer, the data transfer mode or mass storage is selected on the phone.

Some mobile phones need to install software to connect to the computer, you look at your mobile phone model.

Turn the Wi-Fi switch off and on again to try to restore it. There is a temporary failure in the system that may cause the hotspot to not be searched. It is recommended to be closer to the router and scan it again. If the distance is too far, you may not be able to search for the hotspot, or you can turn off the phone and restart it, and turn it on to see if it can be restored.

Is it a Nokia machine? If only Nokia.

A PC kit can be installed.

When connecting, select the PC kit connection for the mobile phone.

If you don't want to install a PC kit, it's fine.

When connecting, select the data transfer mode and you're good to go.

Connect with a data cable, turn on and off separately and try it once, or if you want to drive, Nokia now needs a PC kit.

The phone model is given.

Some cables can only be used to charge your phone on your computer!! I finally found out about this issue today.

Hello I want to ask my mobile phone for the first time I came to the Internet café ** I can't do it when I come here ** what's going on Can you help me solve this problem okay.