How to clean a soymilk machine, how to clean a soymilk machine

Cleaning method of soymilk machine seven:

To clean the barrel, it is necessary to loosen it clockwise, remove the slurry separator, pour out the bean dregs after pulping, and gently wash the soybean milk fibers on the surface with water and brushes.

Cleaning method eight of the soymilk machine:

If there is fouling on the electric heater in the barrel, it can be brushed with a brush; If you can't brush it off for a while, you can soak it in cold water for a period of time before cleaning, and then pour out the remaining water in the bucket after cleaning, and then wash it with a little water and pour it out. You can also use boiling water to remove the surface layer of the electric heater.

Precautions for cleaning soymilk machine.

1. The soymilk machine can't really be soaked in water for cleaning. The soymilk machine can only soak the lower cover part in water, and the upper cover part cannot, because the upper and lower cover joints will enter, so that the soymilk machine can enter the water, which is easy to damage electronic components, such as motors, motherboards, light boards, etc.

2. The soymilk machine cannot be rinsed directly from the upper cover, and when it is to be rinsed, it can only be rinsed against the lower cover of the machine head.

How to clean the soymilk machine:

1. After the soymilk machine is used, it is necessary to unplug the power supply to clean it, so as not to have the risk of electric shock, when the surface of the shell is dirty, do not wipe it with a dripping rag, wring out the rag and then wiping it, which is safer, if the shell is seriously dirty, you can wipe it with a little detergent.

2.If you do not use the soymilk machine for a long time, it should be cleaned in time, so as not to take too long, and the remaining soymilk will stick to the inner wall of the machine and the knife head part, causing trouble in cleaning.

3.When cleaning the head part, do not immerse the head in water, which damages the body and is easy to cause a short circuit.

4.After making a bowl of soy milk, please pay attention to cleaning the grain grinder, electric heater, anti-overflow electrode and temperature sensor and other parts in time to avoid causing dry paste and difficult to clean.

5.The cleaning of the net cover, the cleaning of the net cover is particularly important, now most of the soymilk machines without nets, but there is still a net cover to sieve out the excess bean dregs, so the cleaning of the net cover should be done in a timely manner, and the cleaning brush can be gently washed with running water.

6.In some areas, drinking water will cause soybean milk to coagulate into a situation similar to tofu brain, the main reason is that the water contains too many minerals, which can be solved by using cool boiled water or adding a small amount of salt to the water.

1. First take a clean soft cloth to clean the outside of the soymilk machine, if there are stolen goods such as oil stains outside, you can use dish soap to clean, when washing, you should wipe gently, do not use too much force, so as not to damage the shell of the soymilk machine.

2. When cleaning the electronic circuit parts on the soymilk machine, it is best to wipe it with a dry cloth to prevent water from entering the electronic circuit and affecting the function of the soymilk machine.

3. When cleaning the inside of the soymilk machine, do not put the whole head in the water to flush, but use a piece of special clean soft cloth for the soymilk machine to wipe lightly, and you can take off the parts that are easy to remove and clean them thoroughly with a soft cloth.

4. The blade part must be cleaned of the remaining soybean milk residue, and after washing, you can wash the parts far away from the wire under the machine head with water.

5. When flushing, it should be noted that the water must not touch the part with the wire, if the water droplets enter the plug-in talking head, it will cause a short circuit of the wire and damage the soymilk machine.

6. After all parts are cleaned, install the parts that have been removed, and put the soymilk machine in a safe place that is not easy to be touched, so that it can be used again next time.

For most people, they are very fond of using a soymilk machine. Because the soymilk machine is a very convenient machine to use, both men and women of all ages can easily get started and make all kinds of drinks to satisfy their stomachs. But when people are tired of using it, they will worry about cleaning problems.

However, many brands of soymilk machines now have an automatic cleaning function, so how should the cleaning function of the soymilk machine be used? In addition, when the soymilk machine is dirty, how should it be cleaned? How?

Today, let's learn about the knowledge related to cleaning soymilk machines.

For lazy people in life, they should be very grateful for the current high technology, the soymilk machine comes with a cleaning function that can really reduce a lot of labor, and it is very convenient to use finger grinding. After each use of the soymilk machine, you only need to add an appropriate amount of water according to the requirements of the manual and then start the soymilk machine to achieve automatic cleaning, and the whole cleaning effect is good. However, if there is dirt in the soymilk machine, you can choose the following methods to clean it:

1. Baking soda. Pour the baking soda into the inner tank, soak it in water for about an hour or two, and finally wipe it with a rag and wash it.

2. Alcohol. You can use alcohol to wipe the inner tank, which also plays a role in removing dirt from the inner tank.

3. Toothpaste. You can squeeze an appropriate amount of toothpaste into the inner tank, add some water, and scrub the dirt vigorously.

Mastering these tips can ensure that the dirt in the soymilk machine is completely clean.