How to use the soymilk machine, how to use the soymilk machine

Teach Joyoung soymilk machine to use.

The soymilk machine has gradually become a common electrical appliance in many families, and it is actually very convenient to use the soymilk machine to make soymilk. Generally, before making soy milk, the dried beans are soaked, and it is best to soak them one day in advance, so that you don't have to wait so long, and then put them in the soymilk machine according to the proportion of the ingredients.

How to use a soymilk machine.

1. Measure the ingredients.

Before using a soymilk machine to make soymilk, we need to soak soybeans or other beans sufficiently, so that it is easier to make soymilk. Use a soymilk machine with a dry bean measuring cup to fill the dried beans according to the 2 3 scale line, wash them and soak them in water, and the soaking time is 8-16 hours in spring and autumn, 6-10 hours in summer, and 10-16 hours in winter. If you want to speed up the soaking time, you can choose warm water soaking appropriately, which can be shortened to 2 to 3 hours.

2. Add the ingredients.

Add beans and rice to the cup, measure the rice in the bean measuring cup according to 2 3 scales, wash it with the soaked beans and put it directly into the cup.

3. Add water.

After putting in the ingredients, you can put in the water, and there will be a water level in the cup. Add water between the upper and lower waterlines.

4. Install the grain grinding machine.

Take the grain grinder and install it in the direction of the installation instructions, the mouth of the grain grinder and the lower cover should be tight and seamless, after the installation is completed, pull it down by hand, and the grain grinder does not move, indicating that it is installed in place.

5. Make soy milk.

Put the machine head into the cup according to the correct position, plug in the power cord, the power indicator light is on, press the soybean milk jian, the corresponding indicator light is on, and start the full nutrition soybean milk program. When the soy milk is beaten, there will be a prompt light or prompt sound, and the soy milk is ready.

6. After the machine beats and fully boils according to the set program, the electric heater and motor stop working, and the machine sends out an audible and visual alarm to indicate that the soybean milk is ready. Unplug and you're ready to drink.

7. Cleaning of soymilk machine.

The soymilk machine should be cleaned in time after use, otherwise it will be difficult to clean after drying. Head: Please gently rinse the soy milk or other things adhered to the lower part of the head with water, do not immerse the head in water, and do not clean the upper part of the head with water to prevent water from entering the machine and causing a short circuit.

Rafal mesh: Please carefully clean the Rafal mesh with a cleaning brush or cleaning block, and be sure to rinse it well to avoid the odor caused by residual soy milk. Electric Heaters:

Please clean the electric heater with a cleaning block, and clean the soybean milk film or other things adhered to the electric heater to avoid the mushy smell of the next use. Cup: Please clean the inside of the cup with a cleaning block and rinse it with water.

Storage: Please store the unit in a dry, ventilated place.

Hello, 1. Heating: After the program starts, the electric heater starts heating at full power. After about 8 minutes (when using room temperature water), the water temperature reaches the set temperature for beating.

2. Pre-beating: When the water temperature reaches the set temperature, pre-beating, and then heating at full power to the set water temperature. 3. Beating:

When the water temperature reaches the set temperature again, the motor starts to make noise, and the motor drives the blade to beat the pulp many times. 4. Boiling pulp: After the pulping is finished, the electric heater continues to heat at full power until the soybean milk boils for the first time.

5. Stool anti-overflow and extended cooking: After the soybean milk boils for the first time, the anti-overflow heating function of the machine will automatically start and enter the process of power reduction and extended cooking. The electric heater heats intermittently to bring the soy milk to a boil repeatedly, fully cooked and prevent spillage.

6. Power-off alarm: After the work is over, the electric heater, electric data vibrillator and other components will automatically power off, and the machine will send out an audible and visual alarm to indicate that the soybean milk has been prepared. At this time, after unplugging the power supply, you can prepare to drink soy milk.

Clean the soybeans in advance, and then add water to soak, if you want to add mung beans, black beans and other beans that are not easy to soak soft, it is best to soak half a day in advance.

1. First turn on the soymilk maker and put on a "protective umbrella" for it

2. Then pour the wrapped soybeans into the soymilk maker and add an appropriate amount of water.

3. Then align the position and cover the machine head and plug in the power supply.

4. Select the button according to the functions provided by the soymilk machine itself and the type of ingredients added.

5. The alarm sound of the machine indicates that the soybean milk has been prepared, and you must remember to unplug the power.