Is there anything wrong with wanting to renovate the house but not changing the original tiles kitc

Do not replace the original tiles must be attached to your conditions: 1. The original kitchen and bathroom department meet your current needs. (That is, the location of the original electric water circuit is acceptable.) ）

Second, the original water circuit must be a hidden construction process.

3. If you want to live for a long time, check what material the original hot and cold water pipe is (it is a brand PPR pipe, power circuit process material specification).

Fourth, check again that there is no problem with the waterproofing of the bathroom.

Fifth, the impermeability of the original kitchen floor tiles should be good.

If you don't change the original wall and floor tiles, you just can't change the original layout (only individual sanitary ware and equipment). However, this will reduce the corresponding investment in renovation.

You should consider it comprehensively: first, if you live for a long time and do not want to change the house, if the funds are sufficient, it is best to rearrange the plan (the original equipment may not be easy to use).

Second, if it is a second-hand house (originally lived), it should be considered to replace, there is a saying: it is to renew the breath of the original occupants. Just like the white of the wall must be eradicated and scraped.

The decoration of other rooms will not have a big impact, and the decoration of the kitchen and bathroom is more troublesome, and the cabinets are replaced. Smoke machine cooktop. Electrical appliances.

Lamps. Ceiling. Sanitary ware.

Water heater. Shower room. Heating and so on need to knock, disassemble and install, it is easy to cause tile damage, such as water circuit transformation to go dark line to destroy the wall tiles more troublesome, so the floor tiles must have a protective film complete protection, water meter gas meter protection, water and water drain heating interface and other wrapping to avoid blockage is very important, conditional wall tiles should also protect a part, in addition to the general decoration company or workers are unwilling to take such work, can not let go.

Personally, I recommend replacing them all!

There is no problem to give some advice: on the premise of determining that your floor tiles are vitrified polished tiles: if it is troublesome to change all idle, it is recommended to find a special cleaning company to do professional renovation treatment, so that your home bricks become new bricks.

so that the bricks do not seep dirt again.

There is no problem, and there is no need to renovate, the renovation is not cheap, it costs 30 square meters.

That's what I did.

It's a lower grade, but it saves money and shortens the construction period.

If the original tiles are still intact, it is not necessary to remove the old tiles, and it is also possible to apply them directly to the tiles. However, when paving directly on the old tiles, we should pay attention to two points, one is the firmness of the tile paste, and the other is the space occupation.

1. About the firmness of the tile.

The first concern of tile paving is the firmness after pasting, the original wall will do some measures in advance in order to increase the adhesion between the base surface and the tile, and for some characteristics of the original tile, the adhesive linked with the tile may lose the original effect, plus the original tile will have a local hollowing phenomenon, which may affect the firmness of the tile.

When renovating ceramic tiles, it is necessary to first check the hollowing condition of the original tiles and take corresponding measures, and at the same time apply a surface agent to the surface of the tiles to enhance the adhesion. At the same time, the tile adhesive used between the tiles and the tiles can be carried out on the tiles, and the tiles do not have to be removed.

2. On the issue of space.

The space in the kitchen, bathroom and other areas is not large, so it is necessary to arrange the space reasonably when decorating. If the tiles are applied on top of the existing tiles, the thickness between the tiles and the wall will be increased, thus reducing the use of space.

This problem will definitely exist, although the thin paste technology is basically used now, but the original thickness of the tile after paving can not be ignored, but the development of thin paste technology has also been reduced in terms of thickness.

Answer: The kitchen is more susceptible to oil pollution because of frequent cooking, so you must be cautious when choosing ceiling materials, and you must choose oil-resistant materials, such as aluminum gusset board, plastic steel plate, PVC board and waterproof gypsum board. The advantage of aluminum gusset or plastic steel plate is that it is easy to disassemble and assemble, and although the gypsum board seal is beautiful, it is inconvenient to repair. It doesn't matter if you don't use waterproof gypsum board in the kitchen, because there is not much moisture in the kitchen, and the kitchen basically has windows, so it won't be too wet.

2.Selection of Aluminum Buckle Plate Aluminum buckle plate is a three-layer composite plate with plastic as the core layer and aluminum plate on the outside, which can apply decorative or protective coating on the surface. The aluminum gusset used in the kitchen and bathroom mainly considers the surface treatment technology, which is currently commonly used

Electrostatic spraying, baking paint, roller coating, pearlescent roller coating

It can be made from new polishing to glaze, and now the technology can be renovated, and the ceramic tile glaze made can not be compared with the new brick, but it is as bright as it is shining.

It's going to be used, it's really not going to work, and then change it.

The kitchen and bathroom tiles must be a little better.

First of all, the kitchen and bathroom are water environments, which require tiles with low water absorption, and the kitchen oil stain is relatively large, and it must have strong anti-fouling ability.

Secondly, after the decoration must be used for a long time, if the quality of the tile is not good, resulting in damage, hollowing, fading and wear, etc., you have to re-lay the tile, which is time-consuming, laborious and costly, so a good tile has a longer service life.

Again, it is necessary to choose the right tile, depending on the style, color, specification, bright or matte, to avoid light pollution.

Finally, it is recommended that antique bricks are more suitable for kitchens and bathrooms, and Yipai tiles are good.

As the saying goes, "cheap is not good, good is not cheap", but for decoration, if you have the mentality of picking expensive, you must be the best, just like the fish and meat slaughtered on the chopping board of the building materials market. Because there are many types, patterns and sizes of ceramic tiles, many people spend most of their time choosing tiles when they do decoration.

Tile type. Ceramic tiles are roughly divided into polished tiles, antique tiles, porcelain tiles, glazed tiles, full-body tiles, microcrystalline stones and other types (see picture).

After having a general understanding of the tiles on the market, we can choose tiles according to them.

living room tiles. For the pragmatist, dirt and wear resistance should be the preferred basic performance of ceramic tiles, and most living spaces, especially in the living room where guests and people come and go, need to be hard enough and wear-resistant tiles. It is also the reason why most people choose polished tiles as living room tiles.

Living room background wall.

Microcrystalline stone is a popular high-end ceramic tile material in recent years, with exquisite texture and bright color, many owners will choose to use microcrystalline stone tiles to decorate the TV background wall, luxurious and atmospheric, which can instantly enhance the taste of the living room.

Kitchen wall tiles for purchase.

The kitchen wall should be scrubbed-resistant tiles, and the kitchen wall should be made of wall materials that are easy to clean and not easy to get oily, as well as fire-resistant and heat-resistant tiles. Although there are alternative products such as fireproof boards, glass, and coatings in the market, ceramic tiles still occupy the mainstream market.

The glazed brick is used as the kitchen wall, the glaze is transparent and acid and alkali resistant, and has a complete isolation effect on oil stains, so that bacteria, odor, scaling, and slime cannot breed. The surface of glazed tiles is divided into two types: bright and matte, and the bright light is easier to take care of.

The overall matching of porcelain tiles, flower tiles, and waist lines is more transparent and warm.

Kitchen floor tiles for purchase.

Choose a full-body brick, the material and color of the front and back are consistent, with good slip resistance and wear resistance. Generally known as "non-slip bricks", they are found in lobbies, hallways, and outdoor walkways.

Bathroom tiles.

The decorative materials commonly used in the wall and floor of the bathroom are glazed tiles, vitrified tiles, and mosaics. Bathroom wall tiles must be covered with waterproof, anti-corrosion and anti-mildew tiles, floor tiles are recommended to choose tiles with a certain friction but light texture, non-slip and avoid hiding dirt, and it is not so difficult to clean.

If you need ***, the quality of the toilet bricks will be reversed.

If the floor tiles in the bathroom are replaced as a whole, it is recommended to remove the toilet;

After the waterproofing, before the tile is paved firmly, it is recommended not to use the bathroom, mainly to avoid walking on the tile before it is dry and solid, resulting in the hollowing of the tile delamination;

After the tile is paved, the toilet is installed;

Tile paving is a basic skill of bricklayer (inlay worker), and the bricklayer is mainly responsible for the construction of wall masonry, cement mortar plastering leveling, tile paving, waterproof construction, etc.;

If you only buy floor tiles for the bathroom, generally speaking, the problem is not too big. You can buy it nearby or buy it online.

The issues that require special attention are as follows:

When disassembling tiles, do not damage the pipelines on the ground;

In the process of dismantling and tiling, be careful not to pour muck into the sewer pipe to avoid blockage;

When doing ground waterproofing, it is necessary to pay attention to the waterproof construction of the wall-ground junction part.

1. If the floor tiles of the bathroom are replaced as a whole, it is recommended to remove the toilet.

2. Before the tile is paved firmly after the waterproofing, it is recommended not to use the bathroom, mainly to avoid walking on the tile before it is dry and solid, causing the tile to be hollow and delamination.

3. After the tile paving is completed, the toilet is installed.

4. Tile paving is a basic skill of bricklayer (inlay worker), and the bricklayer is mainly responsible for the construction of wall masonry, cement mortar plastering leveling, tile paving, waterproof construction, etc.

5. If you only buy floor tiles for the bathroom, generally speaking, the problem is not too big. You can buy it nearby or buy it online.

The issues that require special attention are as follows:

1. When disassembling tiles, do not damage the pipelines on the ground;

2. In the process of dismantling and tiling, be careful not to pour muck into the sewer pipe, so as not to cause blockage;

3. When doing ground waterproofing, it is necessary to pay attention to the waterproof construction of the wall-ground junction part;

I think it's better to separate, after all, one is the toilet and the other is the kitchen, the gap is so big, it's better to separateYou can use darker bricks in the toilet, such as brown or gray, but use lighter colors in the kitchen, such as white or beige, so that the whole kitchen will look clean and tidy, and the same bricks as the toilet will affect the overall effect.

The bathroom is the place with the most water, and the tiles with good water absorption are non-slip, because the ground is often washed with a lot of water, so that the tiles can not be affected by water vapor and do not absorb stainsIf the wall tiles are used on the floor, they will become difficult to clean due to too much water absorption. The anti-slip performance of the bathroom is very important, especially when there are elderly people and children at home, matte bricks have a concave and convex feeling that imitates natural rocks, and the anti-slip performance is excellent, suitable for wet environments.

The kitchen is a "place where fire and water are compatible", and any material chosen for kitchen renovation must take this into accountThe kitchen often has to cook, the oil is big, and it is difficult to clean, so don't choose the kind of tiles with concave and convex patterns on the surface, otherwise you will doubt your life when you do sanitation in the future! It is better to choose tiles with a smooth surface, and it is better to choose tiles with bright colors for the wall, which look clean and refreshing.

In addition to considering the choice of tiles in various regions when decorating, we should also consider the categories of ceramic tiles demanded by various groups of people. If there are elderly or children in the home, we should consider more when decorating the safety of using tiles. Here is a reminder to everyone, it is not recommended to choose dark floor tiles, dark wall tiles and warm wall tiles when decorating a small area of house or area.

But it's okay, but it doesn't look comfortable, I think it's best to use light colors in the kitchen, it looks beautiful, and it feels clean and comfortable.

Generally, the tiles in the bathroom are non-slip, ** more expensive, but the tiles in the kitchen and living room do not seem to have this need, and you can use it.

It can be, but the tiles in the bathroom need to have a certain anti-slip ability, and the tiles in the kitchen have no anti-slip ability It doesn't matter much.

Kitchen tiles are mainly white patterns, and the kitchen tiles with white patterns give people a clean and bright feeling, and they are particularly easy to take care of.

Bathroom tiles and kitchen tiles can be used the same kind, this is not particular, mainly depends on personal preference.

You can choose the same kind of tile, but the tile for the bathroom and kitchen must be non-slip. Otherwise, it is easy to slip and fall.

You can use the same type, choose white or light-colored tiles, which will make the kitchen and toilet look clean and bright.

You can use the same one, but it doesn't look beautiful, try not to use the same one, after all, there are so many types of tiles on the market now.

Nowadays, everyone pays more and more attention to the decoration of the bathroom, but what if the bathroom tiles are broken and do not want to change?

If you don't want to replace the bathroom tiles, you can only take the way of partial floor decoration.

As we all know, bathroom tiles are a necessary process, so which is the best bathroom tile? Let me tell you and take you to understand the safety tips of the bathroom.

Generally speaking, high-quality tiles have a very low water absorption, so that they can dry quickly. If the tile does not indicate the water absorption, you can use tea or water droplets on the back of the tile, and check the diffusion degree of the water droplets after a few minutes. Tiles with high water absorption rate will be cracked on the surface of the tiles and peeling off the entire wall and floor tiles after thermal expansion and contraction.

Second, choose a tile with high density, when buying tiles, you can observe from the side whether the brick surface is smooth and whether there are pinholes of uneven thickness. At the same time, you can tap the tile to listen to whether the sound is crisp, the more brittle the sound, the higher the texture density of the tile, the better the hardness. Such tiles are laid into the bathroom space, which is not easy to damage and easy to maintain and clean.

In general, there are no hard requirements for this, as long as the waterproof is good and the glaze is sufficient, and then choose a brick that suits the color of your home's wide bathroom. If the light is good, you can use a little dark color bright brick, but if the lighting is not good, it is recommended to use only light color, matte brick is relatively speaking, it does not look too cold, and it is recommended not to use highlight.

Toilet safety and loss of skin all small knowledge: the bathroom floor is full of water, it is easy to make people fall, the elderly and children once they slip due to stagnant water, it is easy to fracture the phenomenon; Some elderly people with heart disease may also have angina pectoris caused by falling, which will threaten the life safety of the elderly if not treated in time. Therefore, we should pay attention to creating a relatively dry bathroom environment, which will be a good safety guarantee for the safety of the family.