After the mobile phone enters the water, it can be turned on at the beginning the amount of water e

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. Because the phone has been turned off, please do not try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

1.Shutdown: This is definitely the first step to save the phone, no matter how much water ingress the phone, please turn it off first, otherwise it will burn out the circuit directly.

2.Check the location of water ingress: In most cases, the location of a large amount of water ingress into the mobile phone is generally the headphone jack and charging hole, because as long as it is not broken in other places, there are no cracks.

3.Check for external damage: if it's simply soaked in water, it's not a big problem. However, if it rains and falls out, check whether there is any cracks in the phone and water in.

4.Simple water intake: If it is just a simple water intake, then take a hair dryer, adjust to the cool breeze setting, and dry it with a small breeze. Since most of the water enters from the headphone jack, the phone should stand up.

5.Wait a few days before turning it on: simply enter the water, when the phone is dried, you can turn on the phone and use it normally, of course, if you can't turn it on, it can only be that the water enters too much, and the circuit inside is broken. It should be sent for repair in time.

It can't be turned on immediately after water ingress

It's best to turn off the phone immediately and let the phone dry completely before turning it on.

The mobile phone is not turned off when the water is in, mainly depends on the water has not entered the mobile phone, if the water enters the motherboard and causes the remaining fiber to short circuit, the vertical number of imitation mobile phones will be broken. So it's safer to shut down.

Operating phone: iphone13

Operating system: ios13

The phone can be turned on after 12 hours of water ingress and shutdown.

This is directly related to the material of the mobile phone, the mobile phone in the process of use, if the water is in, it will cause serious damage to the motherboard battery and circuit of the mobile phone, if the power is turned off and the water must be thoroughly controlled after the water is cleaned, so that the motherboard and the line can return to normal application state, this time takes about 12 hours to turn on.

The reasons why the phone can't be charged after water is in the water are as follows:

1. The system of the mobile phone is faulty, which causes problems with the battery level display. This kind of problem is the easiest to solve, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.

2. The charger is faulty. This malfunction is the main reason why the phone cannot be charged. So how to judge the quality of the charger.

It's actually very simple, try it with another charger. If it can be charged, then it can be concluded that the charger is faulty. When you encounter this kind of problem, you have no choice but to buy another charger.

3. Poor contact between the charger and the mobile phone. This is also a common occurrence of the charger not being plugged in due to the carelessness of the mobile phone user. The solution is simple, it is to switch sockets back and forth.

4. There is a problem with the mobile phone battery. Generally speaking, it is rare to have problems with your phone's battery. But once there is a problem, it is a big problem and must be taken seriously.

Therefore, when it is found that the charger and mobile phone system are not faulty, you should focus on checking the battery. If you find that the battery is swollen, then it means that there is a problem with the battery and you must stop using it immediately. Do not disassemble the battery indiscriminately.

Because a swollen battery can easily cause **, bringing serious consequences.

5.There are quality issues with the phone itself. If you buy a copycat phone, then there is a high probability that the mobile phone will malfunction. If it is a brand machine, it needs to be returned to the original factory for processing. <>

Summary. What should I do if my phone still can't turn on after a few days of water entering the water, hello! 1 Method 1:

Remove the water first and dry the phone in time. We found that the phone had fallen into the water, and we scooped it up in time. Quickly wipe off all the moisture on the fuselage and remove the soft rubber case of the mobile phone, because the soft rubber case will get stuck in the water.

Method 2: If the phone is turned on, we need to turn it off in time. Avoid powering up the phone and burning the internal parts.

If it's an old-fashioned phone, we can remove all the back cover, battery, etc. This avoids electricity and allows moisture to flow faster. Method 3:

Use a cotton swab or paper towel to quickly drain the water in the earphone hole and the water in the charging hole. After the phone gets into the water, take out the battery immediately, and then open the case and use a hair dryer to blow it clean. Method 4:

After all the water absorption we could do, we still couldn't turn it on. If you want to put the mobile phone in a ventilated place or put the mobile phone in a rice bag for 3 days, and it still can't be turned on after the above methods are over, then the motherboard is burned out and needs to be replaced by yourself. Hope it helps!

What should I do if my phone still can't turn on after a few days of water penetration?

Master, can you still be there?

What should I do if my phone still can't turn on after a few days of water entering the water, hello! 1 Method 1: Remove the water first and dry the phone in time.

We found that the phone had fallen into the water, and we scooped it up in time. Quickly wipe off all the moisture on the fuselage and remove the soft rubber case of the mobile phone, because the soft rubber case will get stuck in the water. Method 2:

If this is the phone is turned on, we have to turn it off in time. Avoid powering up the phone and burning the internal parts. If it's an old-fashioned phone, we can remove all the back cover, battery, etc.

This avoids electricity and allows moisture to flow faster. Method 3: Use a cotton swab or paper towel to quickly drain the water in the earphone hole and the water in the charging hole.

After the phone gets into the water, take out the battery immediately, and then open the case and use a hair dryer to blow it clean. Method 4: After we have done all the water absorption work we can do, we still can't turn it on.

If you want to put the mobile phone in a ventilated place or put the mobile phone in a rice bag for 3 days, and it still can't be turned on after the above methods are over, then the motherboard is burned out and needs to be replaced by yourself. Hope it helps!

It's best not to turn it on, the line in the phone will be easy to short circuit after the phone gets into the water, therefore, don't turn on the phone after the water gets in, if the phone is on, please turn it off and don't do anything.

When the mobile phone enters the water, there are a few points that must not be done, otherwise it is easy to push the mobile phone into a point of no return, so that you completely lose your love machine, so what points can not be done?

Taboo 1: You can't keep pressing the button after the phone gets into the water.

After the mobile phone enters the water, many people's first reaction is to quickly pick up the mobile phone, and then keep pressing the power button or home button to detect that the mobile phone is still talking about being able to turn on. This is a very wrong and fatal approach, because when the phone is turned on and water enters, the positive circuit in the phone will be very easy to short circuit, and the manifestation of this fault is that no matter how you turn the phone on, the phone will always be turned off. When the mobile phone is flooded, if you pick up the mobile phone and find that the mobile phone is still turned on, you should turn it off immediately and do not do any more operations.

Taboo 2: Use a hot hair dryer to dry the surface moisture after the power is off.

After entering the water, please do not use a hair dryer to dry it immediately, or take it to the stove to bake, the heat from the outside is very easy to damage the delicate electronic components inside the phone. In addition, you should not try to throw water off the phone, as excessive shaking may cause immeasurable consequences for the water to flow to the motherboard of the phone. The correct way is to use a paper towel to quickly wipe the moisture on the surface of the phone to avoid letting the moisture flow into the charging port of the phone and the headphone jack.

After wiping it clean, keep the phone in a state of turning off the game. Note that you can't disassemble the phone without permission, if it's not professional, then disassembling it yourself will also cause damage to the phone.

Taboo 3: Wait for the phone to turn on on its own.

Many people like to dry the mobile phone in the water enough to turn it on again, if you do this, you will be too irresponsible for your love machine, because we don't know whether there are hidden dangers after the water, and it is not good for you to continue to use it, so when the mobile phone is in the water, you should contact a professional maintenance organization for the first time to minimize the damage to the mobile phone.

If you are using a Huawei mobile phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Make an appointment for service. Customer Service Center.

Boarding service. Repair spare parts** inquiry.

Hello, probably.

Let the water be connected to a short circuit, it is recommended to go to the after-sales inspection, do not repair it yourself, because you don't have the water inlet machine, you don't know that there is a problem.

Please do not panic when your mobile phone gets into the water. We divide the situation into 3 types: first, fall into clear water when the power is on; 2. Falling into non-corrosive liquids in the case of power failure; 3. Falling into non-clean water when the power is on, or falling into corrosive liquid or viscous liquid or other parts of the cleaning regardless of whether the power is on.

Liquid. The first two cases are where there is a good chance of being saved and there is a possibility that there is nothing.

The latter is a matter of luck. Of course, if you are unlucky, it will also be bad if you put it in your pocket.

The biggest problem after water ingress is how to deal with it. First of all, for the 1st and 2nd cases, we must not think that the machine has been scrapped. Don't think it's already in the water anyway, so you disassemble it indiscriminately. Here are some suggestions for each situation:

1. Drop into clean water when the power is on, this situation generally does not need to be disassembled.

1. Power off as soon as possible.

2. Shake dry vigorously (depending on the situation, if you pick up the phone immediately after falling into the water, you can consider not throwing it dry), but don't shake off the machine, the idea is to shake out the water in the screen. If there are water droplets left on the screen, there will be traces after drying.

3. Put it under a slight heat source such as a table lamp and spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit after this treatment can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.