I have Telecom Tianyi Broadband. Taipower tablet. Ask me how I can access the Internet. 40

Hello: You buy a wireless router and install it and you can use it. You first connect the device as shown below.

Enter the address you see on the router in your browser, which is usually.

Then enter, enter the corresponding account and password, generally the new ones are admin

After entering the operation interface, you will see a setup wizard on the left, click to enter.

Enter the setup wizard interface.

If you choose PPPoE dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

Go to the wireless settings and select whether the router is enabled for wireless status, which is enabled by default. The SSID is the login name used for authentication by the wireless LAN, and only the authenticated user can access the wireless network.

There are four options for 11m, 54m and 108m in the mode, and only 11m and 54m can choose the frequency band, with a total of 1 13 frequency bands to choose from, which can effectively avoid repeated frequency bands in close range.

You should have noticed that there are two 108M modes, one is static mode and the other is dynamic mode. One of the two is static and the other is dynamic, note that if you choose the static 108M mode, you must be a wireless network card that supports the SpeedTM function to connect, it is recommended to choose dynamic or 54M adaptive.

Just pick up a wireless router.。。

If you have any questions, please ask and hope to be satisfied.

I'm soy sauce

A lot of people will melt.

Hello 1, wifi Internet access needs to have a wireless router, and then set to dynamic IP; automatic dialing; The channel is changed to 11 or less.

2. The tablet does not need to be set up, if you have set it, please restore the factory settings, (take the Android system as an example) Settings - Backup and Reset - Factory Reset - Reset the Tablet - Clear all content.

3. After turning on the wifi to connect to the network, you can go online, if you are connected but can't access the Internet, it is recommended to change the channel, and then restart the router to try again.

You use a wireless cat not a wireless router.,But the telecom can basically crack into a wireless router.,You search for the corresponding model of cracking tutorial.。

Look at the network settings, and there is the problem of distance.

Tablet PCs are actually "big mobile phones", some can be loaded with **cards, receive **, and some cannot be installed with **cards. However, regardless of whether you can install ** card or not, it supports wifi Internet access function. The answer to the question of being able to connect to a wireless cat is no, because a cat alone cannot send a wifi signal, and a router is needed to transmit the signal and the tablet can receive it.

Hello! You really can't access the Internet because the tablet doesn't have a modem, and although you search for a signal, you still can't dial up the Internet! It is recommended to buy another wireless router, use the computer settings to enter the wireless router to set the Internet conditions, and you can use any wireless device to access the Internet!

You don't need to buy a computer, you can borrow a laptop, set it up and return it to someone else! Hope it helps!

The wireless cat itself has a dialing function, so you don't need to dial on the tablet, please set it up in the cat.

It's very simple,Just let your wireless router automatically dial on the line,Enter your wireless router address in IE,Generally or,The username and password are generally admin,And then on the page of quick configuration,There may also be other names,You look carefully,A choice that will let you choose the connection method,To choose "pppoe",Then enter your broadband username and password,Save the configuration,The general router will automatically restart, Then as long as your computer or tablet is connected to the wireless router, it will automatically dial up, and you can access the Internet, you can refer to the manual of the wireless router, which is very simple, 2 minutes to get it,

3G Internet access:

1. You need to have a SIM card that supports 3G network and a 3G dongle network card that supports the native model.

3. Turn off wifi, and only one Internet mode can be supported at the same time.

4. Connection: tablet PC - OTG cable - 3G dongle network card - SIM card (make sure the SIM card is a 3G card and has been opened).

5. A 3G signal icon will appear in the menu bar of the desktop, and you can surf the Internet normally.

Telecommunications seems to be generally incompatible with tablets It should be okay to change to Unicom Our school is Unicom My original channel N12 can be connected I hope it can help you.

I don't know much about Taipower, I know Newman's more generally, it's the same, you can take a look, the tablet generally doesn't support dial-up Internet access, it's Ethernet, that is, the network cable needs to be drawn out of the router, and it can't be connected directly to the cat, I don't know if Taipower is the same, you see. Hope it works.

1. Get a 3G network card for telecom or China Unicom (SIM card + wireless network SIM card for 3G network) - not cost-effective.

2. If you have broadband at home, you can directly buy a wireless router to connect to wifi

According to your description, there is no Taipower tablet that supports telecom cards for the time being. You can use telecom broadband, connect to a wireless router, and use telecom wireless network to access the Internet.

Anhui Telecom will serve you wholeheartedly, I hope mine can get yours.

Telecom price reduction, mobile phone bill is only 3% off! 49 yuan package 129 yuan, including 330 minutes of voice, 600m traffic, and you can add 1 yuan to double the traffic! 69 yuan for 189 yuan; 89 yuan for 289 yuan; 99 yuan for 329 yuan.

For more information, please visit the online business hall of Anhui Telecom.