How do I connect two routers with network cables? The method is the step. Solve 10

The primary router is plugged into the LAN and the secondary router is plugged into the WAN

See what you want to achieve!

How to network dual wireless routers needs to be based on your actual network layout! First of all, you need to determine the overall networking scheme, and only after the networking scheme is determined can the settings between the two routers be determined. At present, there are two networking solutions to choose from: one is that the two wireless routers are connected to the optical modem respectively, and the routers are in the same level relationship with each other; One is that the primary router is attached to the secondary router, and the routers have a master-slave relationship with each other.

From the perspective of the hierarchical relationship and stability of the network, it is recommended to adopt the first method, and here we mainly explain how to implement the first method. Networking suggestions for dual wireless routers: Modern home networking uses the weak current box as the central node, and each room is connected to the weak current box through a dark wire.

There are two reasons for adopting this network layout, one is that the network integrated wiring has been finalized, which will be the easiest to implement and the least costly way; The second is that the two wireless routers are at the same level as each other, so there will be no problems in the entire network because one router crashes. Even if the two routers are bridged by wire, the wireless automatic roaming function is still not realized, which is far less than this kind of networking.

The operator's optical cat Chang and Xi equipment are placed in the weak current box and connected to the dark line in the living room and bedroom through the network interface. The wireless routers in the living room and bedroom are connected with the wall-plugged network cable respectively, so as to realize the opening of the entire network. Setup issues with dual wireless routers:

There are three ways to use the WAN port of a wireless router, namely broadband PPPOE dial-up, dynamic IP Internet access, and static IP Internet access. Even if you can connect to the Internet even if you have a dynamic IP address or a static IP address, it is recommended to use a static IP address to access the Internet. The IP addresses of the two wireless routers can be set to .. separately

The NMS uses the optical modem as the address.

Summary: To the wifi name of the two wireless routers, the individual recommends that they be set separately. After all, the function of automatic roaming cannot be realized between the two routers, and it is easier to distinguish them by setting them separately to avoid the situation that the connection wifi signal is weak in different locations.

To prevent IP address conflicts, the router modifies the IP address and enters the IP address of the router. On the Settings page, find the network parameter LAN port IP address and modify the IP address file. After the router is restarted, go to the Router Settings page and select Dynamic Mode.

That's it. Note: When the second router restarts, the user will need to log in to the wireless router's settings management interface.

The two routers can be connected by network cables, and if you don't know how to connect yourself, you need to find a professional worker who installs the network. You should set the key when connecting.

The wired connection method of the two routers is to connect the two routers with network cables.

The WAN interface in Router 2 connects to any interface in Router 1's LAN through a network cable, and connects the computer network cable to any interface in Router 2's LAN. The WAN interface of Router 2 is connected to the LAN interface of Router and the dynamic IP access of Router 2 is set.

Log in to the settings page of Router 2 and find the Internet Settings or WAN Port Settings option to set up dynamic IP Internet access for Router 2. Dynamic IP Internet access, in some routers, is also called automatic acquisition of IP address for Internet access, DHCP Internet access, automatic acquisition, etc.

The difference between wired and wireless bridging

Wired bridging is the process of performing the best performance of network packets based on the address of the link layer of the OSI network model. Wireless bridging is a kind of local area network wireless connection technology, which is the product of the combination of wireless radio frequency technology and traditional wired bridge technology.

Find the blue connector, take a good network cable, pinch one end of the network cable, and find the blue connector behind the main router. Plug the network cable into the interface, plug one end of the network cable into one of these blue interfaces, and then pinch the other end of the network cable to find the dark blue main port behind the secondary router. Plug the network cable on this end into this dark blue main port, and your two routers will complete the wired bridge.

1. You first need to enter the second router to turn off the DHCP function, and if the IP addresses of the two routers are the same, they need to be changed to different, 2. The network cable out of the cat is connected to the WAN port of the first router, and the LAN port of the first wireless router is connected to the second wireless LAN port (do not use the WAN port of the second wireless router, and the second wireless router is used as a wireless switch).

3. Connect the computer with a network cable and fill in the broadband account number into the first router.

4. If you want to encrypt the wireless signal, you need to enter the two routers separately to set the password, and it is best to set it to WPA encryption.

5. The LAN port of the first wireless router and the LAN port of the second wireless router can be connected to the computer with network cables.

Dynamic two routers, a network cable, one of the routers will be used as a switch, we here call the router connected to the home line the main router, connected to the main router called the slave router, the main router connection method is mostly will, the home line is connected to the wan port, the rest of the user line is connected to the lan, the user of this connection can directly access the Internet, the key is those users connected from the router, 1A cable is connected to the LAN port of the slave router from any LAN port of the main router (remember, it is not WAN), and all users from the router are connected to the LAN port, and the WAN port is not wired, so that the line is connected.

Router settings, the main router is set up according to the conventional method, the browser router default IP) account password, the router label is written, if someone changes the router login password, you can use something to poke the router restart hole and wait until the router is fully lit, ok, now the factory settings have been restored, log in with the default account password, generally use dynamic IP, then set up the wizard, fill in the account name, password, and complete. Turn on DHCP and the main router will do it. The key is on the router, at this time the user may find that the computer can not get the IP, or restricted, conflicted, etc., the browser opens the prompt can not open the search page, etc., okay, now unplug the connection from the router from the main network cable two routers solution The router is connected to the incoming line, (to prevent entering the main router when entering), at this time.

Direct connection or crossover of network cables is acceptable, and direct connection is recommended.

The easiest way:

1. Enter the B router settings interface and turn off the DHCP function;

2, Restart B router;

3. Plug the network cable from Router A into any LAN port of Router B, (not WAN port);

5. Success!

Just connect it with an ordinary network cable, no need for crossing. The connection method is that the LAN port of the A router you said is connected to the WAN port of the B router with a network cable.

Direct connection, the first and second wireless router connections are LAN ports.

Crossover, in fact, routers are very smart now, and crossover and direct connection are OK.

The WAN port of the secondary router is connected to the LAN port of the primary router, and the WAN port of the primary router is connected to the Internet.

The wireless signal broadcast name of the two wireless routers can be the same, but the IP pools cannot overlap. You can set the primary router to, the secondary router to set or simply use, so that the setting will not cause IP conflicts, and the main router is responsible for the connection dialing and other work of the Internet.

You plug the network cable from the router on the first floor, and the other end to the socket of the wireless router on the second floor. Don't do anything to see if the wireless router on the 2nd floor works?

First, set the LAN port of the first wireless router to set the IP, for example.

Second, set the LAN port of the second router to set the IP, for example.

Third, plug the cable into the WAN port of the second router and you can surf the Internet.

I don't know ...... two routers can be used this way yet