Why can t the router be connected by two people

Hello, the router can be connected to multiple terminals, if you can only connect one person to see if the IP segment is set, you can reset the router and reset it to deal with it.

Line connection router and setup steps:

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

It is recommended that you use telecom broadband to use wireless network for broadband.

Because China Telecom's servers and network settings are more perfect, and every year is constantly improving and upgrading servers and lines, China Telecom's network speed is more stable, the network speed is better, and there will generally be no network congestion during peak periods.

China Telecom is the latest operator to open broadband services, and the technology is relatively mature, and other operators generally lease the backbone network of China Telecom, and the general telecom network is more stable than the broadband of other operators. China Telecom provides the best quality network communication services, at present, Anhui Telecom has activities, 1 discount on phone bills, 9 yuan to 99 yuan, it is recommended to inquire directly through Anhui Telecom business hall or physical business hall.

Turn on your router and see if DNS is set.

The routing input signal and setting the year macro are normal, so it can be used.

What cannot be used may be that the input signal is not set correctly, or even that there is a problem with the hardware.

Wireless routers.

There are two ways to connect to the wireless router and set up the second router (provided that the first router has been set up):

The first method: dynamic IP mode (the first route is the primary route, and the second route is the slave route).

1. Plug in the router and do not connect the LAN port of the main router first, and reset the slave router (restore the factory);

2. Connect the computer from any LAN port of the router to enter the settings page;

3. Set according to the dynamic IP;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the LAN port of the main router to the WAN port from the router.

The second method: wireless AP

Manner. 1. Connect the computer to the LAN port of the router first, and change the IP address of the slave router. For example most router addresses are, we just want to take the IP address from the router.

Instead, it is sufficient; 2. Turn off the DHCP function from the router in the settings;

3. Finally, connect the network cable from the main router to the LAN port of the slave router (any one is fine), note that it cannot be the WAN port.

Is it that the router has no network or the computer has no network?!

If the router does not have a network, you need to check from the cat, first make sure that the cat has a network when it comes out, and then make sure that the router has a network.

If the router has a network and the computer does not have a network, is there more than one computer connection, but your IP is conflicting, it is best to change the IP address of your computer, do not get it automatically, and set a non-conflict by yourself.

Dear, what do you mean by the two routers, the computer is not connected to the Internet, it is estimated that the router is not working properly, or the settings are incorrect, it is recommended to connect the computer to the main router, and manually set the IP address, it should be able to ensure that the computer is connected to the Internet normally.

If you want to connect to the second router, then you have to set the IP of the second router, otherwise the computer will see both routers as the address of one router, so the second router will have no network signal.

If you want to connect two routers, you need to set up the router, if you don't set it up, it may cause an address conflict and you can't access the Internet, you can connect to the computer after making sure that both routers can access the Internet.

This is obviously the wrong connection of the router, or the connection is not normal caused by the inability to connect to the network, you can directly find the operator to assist in debugging and you can connect to the network after successful debugging.

First of all, determine whether the router can access the Internet, if it can access the Internet, and the connection to the computer can not access the Internet, it means that the network cable or the computer is a problem.

The two routers need to be connected to each other, and the IP address cannot be on the same network segment. If the router is in a network segment, it will cause IP conflicts, so you can't access the Internet.

The first router is used for dial-up. The second router can be used as a switch or as a downstream router.

1) The second router can be used as a switch as follows:

The first router dials up to access the Internet normally, and wiring from the LAN port of the first router to the LAN port of the second router.

The second route disables DHCP and modifies the IP address of the LAN port, for example, to avoid IP conflicts. The routing WAN port is not wired, and all network cables are connected to the LAN port.

2) Connect the second router to the next router as follows:

The first router DHCP is to be turned on.

The WAN port of the second router is connected to the LAN port of the first router, and the WAN port is set to dynamically acquire and open.

Do not use the IP pools of the two routers' LAN ports and DHCP in the same network segment. Example: The IP address of the first router LAN port is:

The subnet mask is :, and the IP pool of DHCP is: The subnet mask is:

The LAN port IP address of the second router is : the subnet mask is :, and the IP pool of DHCP is :

The subnet mask is: .

There are two wifi at home, one is a 5G, but only 5G can be connected, and the reason why that can't be connected is because Wi-Fi has a small coverage range, and the mobile phone will not be able to search for wifi devices if it is far away;

Since wireless network frequency bands do not require any telecommunications operator license worldwide, WLAN wireless devices provide a wireless air interface that can be used worldwide at an extremely low cost and with extremely high data bandwidth. Users can quickly browse the web in the Wi-Fi coverage area and make calls anytime, anywhere**. Additional Information:

The main advantage of Wi-Fi is that it does not require wiring, and it can not be limited by wiring conditions, so it is very suitable for the needs of mobile office users, and because Li Qing reported that the signal power of which open beam is less than 100MW, which is lower than the transmission power of mobile phones, Wi-Fi Internet access is relatively the safest and healthiest.

Wireless network wireless Internet access is more commonly used in big cities, although the wireless communication quality transmitted by Wi-Fi technology is not very good, the data security performance is worse than Bluetooth, and the transmission quality needs to be improved, but the transmission speed is very fast, can reach 54Mbps, in line with the needs of personal and social informatization.

Almost all smartphones, tablets, and laptops support Wi-Fi Internet access, making it one of the most widely used wireless network transmission technologies today. In fact, it is to convert the wired network signal into a wireless signal, as introduced at the beginning, using a wireless router for the relevant computers, mobile phones, tablets, etc. that support its technology.

If the mobile phone has a Wi-Fi function, when there is a Wi-Fi wireless signal, you can access the Internet without going through the network of China Mobile Unicom, saving traffic fees.

The two routers in the home can only be connected to one, and the other shows that it cannot connect to the network + other mobile phones, and both can be connected.

Problems with two routers in the home**

Phenomenon**: There are two routers in the home, only one can be connected, and the other shows that it cannot connect to the network. But other phones can connect two routers at the same time, one of which doesn't require additional settings.

Solution**:

1.*Connection Settings**: Connect two routers, assuming that router A is connected to the Internet.

2.*Network cable connection**: Connect the network cable from the LAN port of Router A to the LAN port of Router B.

4.*A Router Dial-up**: You only need to set up dial-up on A router to access the networks of two routers at the same time.

Tips**: If you encounter any problems during operation, please feel free to contact professionals for consultation and resolution. Make sure your network setup is secure and effective to avoid potential cyber risks.