Does the PS2 carve hurt the machine? PS2 pressing and engraving issues

I have been using the engraved disc for almost 2 years, and I also had such doubts as you at the beginning, so now I am very responsible to tell you, not only will it not hurt the service life of the machine, but also the service life of the engraved disc is stronger than the pressure plate. You must know that the quality of the pressure plate has been getting worse and worse for a long time, so at that time some people carved the plate and played it themselves. And no matter how you say it, the engraved plate is better than the pressure plate***, you can rest assured that you can play well.

No, but you can't put the disc in the disc drive to play, especially the computer, it hurts the optical drive, it's better to carve it into an ISO image, and then play with a PS2 emulator, which is what I do.

I think the pressure plate is good, my machine reads the engraved disc very noisy, the reading pressure disc is very stable, the quality of the engraved disc is good, but the disc is thick, and the reading disc sound is a bit loud.

If you can buy a good press plate, it is recommended to press the plate, and I play the pressure plate all the time now.

If you don't buy a good platen, carve it yourself.

Actually, it's the same, so it depends on the quality of the disk, the engraved disk data, most of the heavy pressure disc is raised, because it is the quality of the disc itself, so the general engraved disc is better, and there is to listen to the sound of the disc drive reading the disk, if if it is larger, it is recommended not to use it, I wish you a happy game.

Engraving is the best choice.

Generally choose the discs of Verbatim ***-r and Mitsubishi ***-r. Genuine discs are not much better than burning discs. Ignore the platen. Damaging the PS2 bald head is quite severe.

The genuine disc produced by the game manufacturer is the pressure disk technology, the pirated disk is also the pressure disk technology, there is no difference in the technology itself, the early pirated games are also very playable, and it will not be broken for a long time, but similar to the "post-PS1 era" PS1 disk quality has plunged sharply, and now the quality of the "post-PS2 era" pirated pressure plate is very bad, and it is likely that you can't read out of 10 out of 10. Therefore, the engraved disc can replace the pressure plate, and now the first is basically sold on the engraved plate, if you use Weibao or Mitsubishi engraved disc is also very good quality, but no matter how good the carved disc is not as good as the good pressure plate. Here's a formula for you:

Good platen > good platen > bad platen > bad platen.

So don't buy a bad burner, such as an unknown *** burner.

The technology of the pressure disc is that useless data will be randomly written in the disk, so that the game is evenly distributed between the inner circle and the outer circle of the disc, which is very protective of the bald head.

The engraved disc writes data sequentially from the inner circle to the outer circle, so that the bald head will always read back and forth in several parts of the inner circle, which is not very good for the bald head.

Most of my games now are old presses, with a few Wibel carvings. The bad plates are thrown away.

Let's put it this way. For the same quality disc, the pressure plate has less damage to the bald head than the engraved disc. But now the quality of the color pressure plate on the market is quite bad, buy back a lot of can not read, this pressure plate chassis material is very poor, the damage to the bald head is also relatively large.

Therefore, relatively speaking, the current *** burning disc is a little better than the pressure disc bought outside. **There are PS2 disks that sell Wei Bao disk burning on the Internet, 5 yuan a piece, the quality is very good, I have bought more than 30 copies so far can read normally.

First of all, you must have a recorder installed on your computer, and the software is operated with Nero specifically.

1 Start Nero, select 'Backup' and then click 'Copy Disc', remember not to choose others, otherwise PS2 will not recognize it, I have been a tragedy.

2If you are an ISO file from the Internet, then select 'Disc Image or Saved Items', then select the ISO you want to burn, and then click the arrow on the left, select the burning speed, generally 6 to 8 times the speed is the best, too high PS2 may not recognize the disk, and then put in a blank disk to burn.

3. If you have a pressure plate, feel that the quality is not guaranteed, and want to burn it yourself, then the first step is to select "Copy Disc" and then select "Copy the whole card".', put in the pressure plate, click copy, and after the copy is finished, the disc drive will pop up, prompting you to put in the burning disk, just do it, and then burn, and then it's OK.

Actually, to be honest,I don't think the second one is necessary.,There's actually no big problem with the pressure plate.,Don't worry too much about the bald head.,I've used PS2 for three years.,A lot of pressure plates.,I often play for more than ten hours in a row.,No problems.,At most, there have been a few discs that can't be read.,That may also be a problem with direct reading.。

Well, if the landlord still has any questions, you can hi me, and you must give me extra points.

You can burn it with Nero, the quality of the pressure plate is indeed poor now, but the bald head is a consumable product, and it will be broken sooner or later, if it is a thin machine, the bald head is very easy to change, if it is a thick machine, you can buy a network card, and the hard disk is changed to HDL

What a great game to play "Ask" every day! Let's take a look, it's really powerful and fun.

Beauty handsome guy preferred online game asked @ Dao.

I recommend you to play Tianjiao. 3. Gorgeous scenes, flexible character dress-ups, bring your friends along.