What plastic materials are used for each part of the printer?

PET, PE, PVC are the raw material codes.

Polypropylene PP is one of the lightest plastics, its yield, tensile strength, compressive strength and hardness are better than low-pressure polyethylene, has a very prominent rigidity, high temperature (90) stress relaxation resistance is good, heat resistance is good, can be used above 100, if there is no external force 150 is not deformed, in addition to concentrated sulfuric acid, concentrated nitric acid, it is very stable in many media, low molecular weight aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated hydrocarbons, has a softening and swelling effect on it, almost no water absorption, high frequency electrical properties are not good, easy to form, but the shrinkage rate is large, It is brittle at low temperatures and does not have high wear resistance. It is used as general structural parts, corrosion-resistant chemical equipment and heat-subjected electrical insulation parts.

Polyethylene terephthalate PET

Acrylonitrile, butadidimine, styrene ABS has good comprehensive properties, both high impact toughness and good mechanical properties, excellent heat resistance, oil resistance and chemical stability, dimensional stability, easy machining, the surface can also be plated with metal, good electrical properties For general structure or wear-resistant transmission parts and corrosion-resistant equipment, foam sandwich panels made of ABS can be used as car bodies.

Polyamide 6 PA6 has high fatigue strength and rigidity, good heat resistance, low friction coefficient and good wear resistance, but it has high moisture absorption and insufficient dimensional stability It is suitable for wear-resistant transmission parts working under medium load, service temperature 100 120, and no lubrication or less lubrication.

Polyamide 66 PA66 has high fatigue strength and rigidity, good heat resistance, low friction coefficient and good wear resistance, but has high moisture absorption and insufficient dimensional stability It is suitable for wear-resistant transmission parts working under medium load, service temperature 100 120, no lubrication or less lubrication.

Polycarbonate PC has outstanding impact toughness and creep resistance, high heat resistance, cold resistance is also very good, embrittlement temperature up to -100, bending tensile strength is comparable to nylon, and has high elongation and elastic modulus, but fatigue strength is less than nylon 66, low water absorption, small shrinkage, good dimensional stability, wear resistance comparable to nylon, and has a certain corrosion resistance. The disadvantage is that the molding conditions are required to be high It can be used as a variety of gears, worm gears, racks, cams, bearings, mandrels, pulleys, transmission chains, nuts, washers, pump impellers, lampshades, containers, shells, covers, etc.

Polyethylene PE has excellent dielectric properties, good impact resistance, good water resistance, high chemical stability, service temperature up to 80 100, good friction properties and cold resistance. The disadvantage is that the mechanical strength is not high, the quality is soft, and the molding shrinkage rate is large. It can also be used as a cover for general cables, corrosion-resistant pipes, valves, and pump structural parts, and can also be sprayed on metal surfaces as wear-resistant, anti-friction and anti-corrosion coatings.

The printers are made of thermoplastics, and the places where the paper is placed are generally POM materials.

The electrical housing material has the following characteristics:

Excellent dimensional stability.

Excellent water resistance and aging resistance.

It has excellent toughness and excellent insulation properties.

It can be modified arbitrarily to adjust the hardness, toughness and flexibility.

Arbitrary coloring.

It is non-combustible and has excellent thermal resistance characteristics.

Alas, often come to our factory color printing mobile phone case, mp4 pattern, ** sample of the processor's plastic shell, we always ask about the material properties before printing, the answer is most ABS and PC, spray different coatings, the effect and color fastness are completely different, some PC material shells, color printing effect is very good, and it is completely dry all of a sudden, hehe.

There is a benzene ABS+PC high punch that is used the most ABS

It is a material (engineering thermoplastic) of ABS.

Baichang plastic grease materials have passed the EU environmental protection test, the US FDA food grade test and the CDC test of environmental protection, green, low-carbon, non-toxic, tasteless, cost reduction, energy-saving and other series of materials.

The characteristics of the special electrical shell material (mouse shell material) are as follows

The thermal resistance is 3-10 times greater than that of brick walls (see the interior and exterior wall panels of the frame structure for details) and excellent dimensional stability.

Excellent water resistance and aging resistance.

hardness (Shore Rich) respectively.

It has excellent toughness and excellent insulation properties.

It can be modified arbitrarily to adjust the hardness, toughness and flexibility.

Arbitrary coloring.

It is non-combustible and has excellent thermal resistance characteristics.

It can be printed with rich colors on the surface of soft and hard objects such as raw materials (metal, plastic, stone, leather, wood, metal, glass, crystal, acrylic, coated paper) and semi-finished products (small parts boxes, wallets, bags, trademarks, plaques, etc.).

Since the printhead is non-contact with the media surface during printing, it will not be deformed by heat and pressure, so it is also possible to print on raw materials that are easily deformed and soft, such as leather and textiles. Compared with the existing thermal transfer process, the cost can be reduced by more than 70%.

1 Input tray Load paper here.

2 Input tray extension plate Pull out to hold the paper.

3 Paper Width Rail Move to the side of the paper to position the paper correctly.

4 Camera Ports This port can be connected to a PictBridge-enabled digital camera, the optional HP Bluetooth Wireless Printer Adapter, or an HP iPod.

5 Memory Card Slots Insert the memory card into these slots.

6 Cartridge Hatch Open this door to insert or remove cartridges.

7 Output tray (open) This is where the printer stores the printed **.

The peripheral accessories of various models are also different, and most of them are these now.

Body shell, paper feeder, print head, ribbon, paper detector, power supply, control circuit, transmission system and so on.