Can the digital monitoring system be displayed with multiple screens on a large TV?

Hello dear! 1. Prospective tenants prepare a ** line of BNC to lotus head; 2. Insert the BNC plug of the ** line into the BNC interface of the camera; 3. Insert the other end of the ** line (lotus head) into the antenna signal input interface of the TV; 4. The surveillance camera and TV are connected to the power and started; 5. Use the cavity of the TV to change the remote control operation, and switch the signal of the TV to the TV mode to display the monitoring picture of the camera, indicating that the surveillance camera and the TV have been successfully connected. Hope it helps!

The monitoring screen can be switched between a variety of screens, and you only need to click on the multi-screen you want to display on the software interface, such as 1-screen, 4-screen, 9-screen, 16-screen, and so on. If you are currently on four screens, there may be two situations: the first remainder is not full screen, and there will be an "X-screen" display or display icon on the screen, just select and execute the multiscreen you want.

The second is full-screen display, in which case you need to exit full-screen first, and then execute it according to the method of destroying the first one.

Summary. How to call up the monitoring of digital TV.

4. The surveillance camera and TV are connected to the power and started;

5. Use the remote control of the TV to operate, and switch the signal source of the TV to the TV mode to display the monitoring screen of the camera, indicating that the surveillance camera and the TV have been successfully connected.

Hope it helps!

How to call up the monitoring of digital TV.

How to call up the monitoring of digital TV pro, hello! 1. Prepare a ** line of BNC to lotus head; 2. Insert the BNC plug of the ** line into the BNC interface of the camera; 3. Insert the other end of the ** line (lotus head) into the antenna signal input interface of the cavity skin TV; 4. The surveillance camera and TV are connected to the power and started; 5. Use the remote control of the TV to switch the signal source of the TV to TV mode to display the monitoring screen of the Youfeng camera, indicating that the surveillance camera and the TV have been successfully connected. Hope it helps!

If my answer is helpful to you, please give it a thumbs up (rate it in the lower left corner), your efforts are very important to me, and your support is also the driving force for my progress. I wish you good health and a happy mood!

Summary. How to call up the TV surveillance:

If you need to switch the signal source, if you want to output the picture to the display through the VGA or HDMI interface, you can press the signal source button on the remote control to switch to the VGA interface or HDMI interface, and then the monitoring screen can be displayed.

TV supports screen projection,Turn on iPhone,Find the screen mirroring function,The phone will automatically search for the TV that can be projected,Click the TV name to connect,To use wireless projection, you need to make the TV and the mobile phone under the same wifi。

Smart TV can't connect to the Internet, you can enter the TV's system settings interface, click "Reset factory settings", and then reconnect to the network.

How to call up the monitoring of digital TV.

Do I need to take a picture for you to see?

How to call up TV monitoring:Need to switch the signal source,If it is through VGA or HDMIInter, the picture will be output to the display,He leadbird can press the signal source key on the remote control to switch toVGA interface or HDMIInter,After that, you can already display the monitoring screen。 TV supports screen projection,Turn on iPhone,Find the screen mirroring function,The phone will automatically search for the TV that can be projected,Click the TV name to connect,To use wireless projection, you need to make the TV and the mobile phone under the same wifi。

Smart TV can't connect to the Internet, you can enter the TV's system settings interface, click "Reset factory settings", and then reconnect to the network.

How to call up the monitoring screen on TV,1、Prepare a ** line of BNC to lotus head; 2. Insert the BNC plug of the ** line into the BNC interface of the raid camera; 3. Insert the other end of the ** line (lotus head) into the antenna signal input interface of the TV; 4. After the surveillance camera and TV are connected to the power, start. 5、Make the grip Jing operate with the remote control of the TV,Switch the signal source of the TV to TV mode to display the monitoring picture of the camera,Brother Cavity Pi said that the surveillance camera and the TV have been successfully connected。

Hello. I don't really understand.

Just follow the steps.

How to operate with a TV remote control.

Meaning, how to adjust yesterday's today?

Click playback on the main interface,Choose which way to play back,For example, if you want to see the 5th way, choose the fifth way,Pi Hong and then select the date,Playback yesterday's will be selected on March 24th,At this time, the record of this day will come out! You can fast-forward, or pull the timeline to select the time period precisely!

The opening is all black and white.

1. The monitoring host enters the main menu, and then enters the next section of the menu to play back the video, and then there will be options such as time and type, set the back point query, and then select the time to slide, and then ** on it! 2. The direct brother pressed the playback button. Then do the same as in the first one!

Limited knowledge helps no reputation guess the world, if you have any doubts, please ask, if it helps, Wangjun!