After a few power outages, the graphics card is ghostly

Is the graphics card losing the driver? If updating the driver doesn't help, check the motherboard, in general, the power outage will not damage the graphics card, and it is the power supply and motherboard that are easy to break.

Wipe the connector clean and reseat it.

If it doesn't work, let this card try on another machine to see if the card is broken.

If the card is not broken, discharge the COMS battery, that is, take out the motherboard battery, and then install it back later.

If the problem persists, check whether the power supply is enough to see if there is a problem, and try another graphics card to see if there is a problem with the motherboard.

Finally, is your graphics card a recent one? If so, it's most likely that there is a lack of power

Is your hard drive broken after the power off?,And your power supply.,My computer used to be broken after the power was off.。

If the temperature of the graphics card is too high, the system protection mechanism is triggered, which will force the automatic shutdown to cool down and avoid damage to the hardware at high temperatures.

When the graphics card, CPU and other hardware reach a certain temperature, the computer will automatically restart. About 80 degrees.

The overheating of the graphics card is mostly due to the heat dissipation is not handled well, the contact between the heat sink and the graphics card is not tight, the screws are not tightened or the lack of heat dissipation silicone grease and heat dissipation pads, followed by the aging of the heat dissipation copper tube or the insufficient power supply of the motherboard to the fan, and the speed is not enough, it is recommended that you find a skilled and experienced maintenance personnel to help you test. Notebook hardware questions answered.

What does fever have to do with BGA?

Let's see if the heat dissipation is done well and how the contact is.

There is also a specific temperature, and is it determined that the graphics card is overheating.

But the CPU temperature is only 56 degrees, and the normal graphics card temperature is 100 degrees and the power is off View the original post

Low-end graphics cards do not consume electricity, only GTX75O and GTX75OTI in the mid-range are provincial lead and bright silver electricity, and everything else is about 100W, and high-end graphics cards are very expensive, more than 200W, and Huaiyan key seepage standby is about 75W, which exceeds the full load power of GTX75OTI.

It's very power-consuming, and the whole chassis is the most power-hungry for it and the CPU.

If you don't play well, you don't have to spend it.

Electric shock is better than water

If the GPU is bad, it can't be fixed!

It depends on your luck, first determine whether the graphics card can be used, and if it can't be used, it's best to go to the graphics card warranty station to check.

It's most convenient to break the roots.

The power supply is not plugged in.

Graphics card power plugging:

Look at whether the auxiliary power socket of the graphics card is 6pin or 8pin, and pay attention to fixing the card hook, and then plug the corresponding power plug and lock hook and the graphics card hook in the same direction, directly plug it into the auxiliary power socket of the graphics card and lock the card hook.

The computer graphics card needs an auxiliary power supply, because the PCI-E slot on the motherboard can not supply it enough power and increases, with this auxiliary power socket, you must plug in the auxiliary power supply, otherwise the graphics card will not work.

This graphics card auxiliary power socket has 6pin and 8pin points, check whether the power supply has such a power plug, if not, see if the independent graphics card package has this plug, some graphics card manufacturers are gifted. If not, you can only buy it according to the style of the auxiliary power socket of the independent graphics card, which is generally sold by merchants who sell computer accessories.

It looks very complicated, but it's actually very simple, check if your wiring contact is good, my machine used to be just up, and the light went off again, in fact, it was a problem with the power cord.