Why can t I connect to the Internet when I install a router? 5

Hello V!!

From April to September 2006, Henan Netcom users changed all the phases to PPPOE dial-up mode. In lieu of DHCP certification. After Netcom changes, the router provided by the DHCP certified router provider cannot be tried again, and the router must be changed or upgraded by the router vendor.

The original DHCP limit bandwidth is 100 and no software can be accelerated.

Recommendation: It is recommended not to use NIC sharing. NIC sharing network instability is a certainty. As on the first floor, the host configuration should be quite high.

If your home Netcom should be changed to PPPoE access mode, please log in to the client. Open the properties of the online neighbor, and you will find that there is an additional rwpppoe access chart in it. Click Ctrl+Alt+Del.

Wrap the process. Then change the name of the rwpppoe chart. Arbitrary change of the image:

admin then dials up the Internet using the chart admin. You can leave the broadband client unenabled. It takes up a lot less memory, and it can also be less limited.

By the way, when using the admin chart, you can surf the Internet. The username is not the original account provided by Netcom such as zzz aya 000. Open a web page casually, click on the tool above Open Internet Options and then such as:

Regular, secure, private. Click on the Connect tab to find the admin dialer you just changed, and then click on the settings next to it to see what your account is. The password is the password you use when you access the broadband client.

You can use this to dial directly from the wideband chart with any name (e.g. admin) that you have changed. There will be a lot less restrictions.

The router is going to be set up.。。。 Please see the manual for setting the address.。 There's an option to set dialing numbers inside the router.。。。 Set up your username and password. Two computers will be enough to access the Internet.

Take it easy. I teach you.

First, set up the router. Most of the IPs are:

Four, Gateway, Five, OKInternet access is now available.

The router needs to be set up before it can access the Internet properly.

Enter the router in the IE address strip.

Add your username and password.

If you really can't get on, I suggest you go to your mother and cry again, and if you don't help me get it right, I'll pee everywhere and spit Thank you.

After the router is bought, it is to be set up,The cat is connected to the WAN port of the router,And then from the LAN port to the computer,You also need to set up automatic PPPoe dialing in the router,That is, ADSL dialing,Generally, DHCP is set,This machine can get it automatically,If you don't understand anything, you can ask me。

Check if the router is to be set up, but the routes you buy now are plugged in and can be used directly. The cat is connected to the route.

This has also happened to my computer, you can call ** to Telecom (is Telecom not?) Detailed instructions to the staff according to the error prompt of the connection! You can swap the network port that connects to your computer with the socket that connects to your router.

Then shut down and restart the router, which is connected to the computer!

The wireless router may not be set up correctly.

One end of the network cable is connected to the router, and the other end is connected to the network port of the computer.

1. Open the browser, enter, enter the user name: admin, password: admin (the IP of the general router is, user name: admin, password: admin.)

Visible next to the router device or at the bottom, there is generally writing. ）

2. Click on the quick wizard and follow the prompts.

Interface Type: PPPoE

Enter your broadband account number and password.

3. Select the DHCP service menu and enable the DHCP service.

After the setting is completed, connect one end of the network cable to the LAN port of the modem, and the other end to the WAN port of the router.

The router is not set up, it is best to follow the manual, log in to the router to set the address, there is generally a setup wizard, follow that. There's a good chance you haven't set up your router's wireless network settings.

When installing a wireless router, you need to prepare two network cables:

The first is the broadband user network cable, and the second is the network cable sent by the router.

2. The network cable from the "modem" (modem) is connected to the "WAN" port on the router, and the port (1,2,3,4) of the router is connected to the network cable port behind the computer host.

3. Open the browser and enter or the password and user name of the router are admin, enter the router settings screen, select PPPoE (ADSL virtual dialing) method, enter your home account and password, and confirm.

4. Then set the SSID, encryption method and password to save and restart. The router is set up.

It may be that the router is not set up properly and is set up again.

Step 2: After entering, you will see that you enter the corresponding account and password, and generally the newly purchased ones are admin.

Step 3: After entering the operation interface, you will see a setup wizard on the left, and the attack will enter (generally it will pop up automatically).

Step 4: Enter the interface of the setup wizard.

Step 5: Click Next, enter the Internet mode settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

Step 7: Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

Step 8: The next step is to set it up successfully.

Newly installed routers need to be set up before they can access the Internet.

1. The bus of the broadband network is connected to the WAN port of the router, and the LAN port of the router is connected to the computer.

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

The router needs to be properly configured before it can surf the internet.

After the router is installed, the broadband connection is right, because after using the router, there is no need for a broadband connection, if the broadband connection operation is carried out, then this prompt will inevitably appear.

After the router is set up, you can go directly to the Internet.

Because Autoconnect has already been selected during the router setup process, there is no need for a broadband connection anymore.

Enter the router management page, usually, enter the username and password of the router, usually admin, after entering, there is a setup wizard, follow the prompts of the setup wizard step by step, there is a prompt to enter the account and password you gave when you handle the network, and it should be able to use normally after the setup wizard is completed.

Enter the broadband account number and password.

What is the reason why the oil dew has a strong signal, but I can't access the Internet?