I can t connect to the Internet on my computer, so I ask questions about router settings and kneel d

According to your description, the parameter setting should be normal. Otherwise, you won't be able to access the Internet at all.

Solution: On the premise that there is no problem with the other party's character (take your network cable and occupy high bandwidth ** things), first rule out whether there is a problem with the network cable you connected to the other party's router. Then there is the other party or your computer that has been spoofed by the ARP virus.

Ask a pro to check it out for you.

People who know a little bit about router settings want to restrict you from surfing the Internet, it's too simple.,It's too easy to have a good relationship with your neighbors.,Or you're a master.,Give him a horse through lan.,Get the password of the route first.,Drive routing control.,Or you don't understand anything.,It's better to don't understand anything.,Don't think of any way.,There's no way to do it without permission.。 Find a way to make a relationship, sometimes ADSL drops, and it takes 5 or 6 minutes to dial up again, don't think too badly about people.

Thank you upstairs friend! But to be honest, although he doesn't communicate much with him, he is already very good to him, he asks the puppet to help the puppet and go without saying a word, but the heart is separated from the belly, and the puppet finally believes it now"Being nice to someone doesn't necessarily make someone good to you"...Sweat.

Off topic. It's useless to restart the occasional computer.,Although it's often under things.,But he's not at home.,It's definitely not in the way of him.,Besides.,Even if you don't have bad intentions.,I just want to be fair.,Everyone shares the speed equally.。 Don't block other people's IPs so definitely (I don't know if the router can do these settings).

Hehe. I'm running into this problem too. 、I changed the net。 From telecom to Netcom. It's also like this, one can be on the Internet, and the second one can't be on the Internet.

If it is Henan, the account number should be converted by PPPOE. It is not possible to fill in the account number given by Netcom directly. Here's how to get a live account number:

Henan Netcom PPPOE mode obtains the real user name and password, and accesses the Internet through the dial-up link that comes with Windows.

First, use PPPoE dial-up to access the Internet, then there will be an additional network connection called "rwpppoe" in the network connection, and this connection will automatically disappear when the dialer is disconnected.

2. End the dialer of Netcom in Task Manager, and the "rwpppoe" connection will not automatically disappear in the network connection, right-click the "rwpppoe" icon and select "Properties", and in the "rwpppoe" property dialog box, select "Options" and check the "prompt name, password and certificate" in the "Dialing Options" and select "OK".

3. Right-click "rwpppoe" and select "Disconnect", and then dial with "rwpppoe", then a "connect rwpppoe" will appear

dialog box,Do you see the username You will find that this username is not the same as the username we dialed with Netcom?,Hehe,Don't worry about it,Copy this username and save it.,Next, enter the router pppoe account number for this account,The password is still the original。

Isn't it on?

First, see if your router has wireless capabilities, which is WLAN.

Second, after connecting to the router, you need to connect the computer to the router, and set your account and password on the router to access the Internet, instead of continuing to click on the "broadband connection" on the computer.

The steps are as follows: 1) Connect the computer and router with a network cable;

2) Log in to the router and set it up: Generally, the IP address of the router is OR . You enter this address in the address bar of Internet Explorer, press Enter; Enter the router account and password to log in to the router (the general account and password are admin); After logging in, there is usually a quick setup option, where you can enter your broadband account password.

Set it up step by step.

3) Connect the broadband to the router.

4) At this time, your desktop can be connected to the Internet (if not, use the network cable to connect directly to the computer to try if you can get on, if you can, disconnect the network, not directly unplug the network cable!! Tap Broadband in the lower right corner to disconnect from the network. Then connect to the router. ）

5) Wait until you're sure your router has wireless and your computer has wireless before coming to me.

1 Let the router dial directly, enter the username and password, and after the computer is connected to the router, you can access the Internet.

Different router settings may be different, generally just look at the accompanying manual, it's very simple.

2 Ask your computer to dial up the same way you would without a router.

Wireless? I haven't used it, I've always used it wired.

There is a description in the router manual,The computer generally chooses to automatically obtain the IP address,After the connection is displayed,Enter the ** of the manual,There is:,Enter the username and password given,Enter the router settings interface,There is the content of entering the user name and password,According to the local Internet type,Select the corresponding type on the line,When the setting is successful to be able to access the Internet,As long as you don't turn off the routing and the cat,The two machines can go online at any time,Of course, you can also only go on one,Hehe。

Enter enter in the address bar, you will be prompted to enter your username and password, this is on the label above the router, and then enter it to enter the router settings page, and then enter your Internet account and password as required, save it.

Please double-check that your line connection method is correct

1.As shown in the figure below, if the splitter is not installed, the ** line is directly connected to the ADSL interface of the modem.

2.Then connect the LAN port of the cat to the WAN port of the router, and connect any LAN port of the router to the network port of the host.

3.The network settings for your computer are as follows:

<>5.Restart your router.

Please be sure to check carefully, if there is a problem or cannot be set at any step, you can use a toothpick to press and hold the small hole on the back of the router for 3 seconds to restore the factory settings, and then follow the above steps again.

If you have any questions, please feel free to ask!

Check the network cable from the router to the cat and see if there is any problem.

First test whether QQ can be used, and then test the web page, the reason why the web page cannot be opened is related to the DNS setting.

Post your router settings and computer network settings to diagnose.

Can you use a cat to surf the Internet?