The headphones and microphones in front of the computer plugged in and didn t respond

Click on the little yellow speaker in the lower right corner, there is an audio i o in it, there is a small wrench on the right side of the mode, you click on it, select the first and third points, OK, try it, no, try it once in the restart.

I have also encountered, open the shell of the computer to see, the three wires of the front headphone socket are not connected, that is, there is no wiring, I connect the wire, if there is no wire, I find three wires to connect this socket and the corresponding contacts on the back headphone socket, so that the front and rear two sockets can be used, convenient. You can open the case and take a look.

1. The panel is connected, and the line may be small;

2. Audio manager settings, the possibility is very great. You won't be briefing, so that's all you can say.

It's okay to plug it in, because it's directly plugged into the interface of the sound card, of course. And which socket in front is the socket of the chassis, this socket must be connected to the sound card with a wire, open the chassis and take a look, to see if the socket cable on the chassis is correctly connected to the sound card. If not, consult the dealer and you will know where to plug in.

Or if you know the model of the motherboard (I mean if your sound card is integrated into the motherboard), just go to the Internet and look up the audio interface of the motherboard.

Is it that the cable from the rear headset to the front headset in the chassis is not connected?

You open the case lid and connect it on.

Disassemble the case and see if the front headphone port is wired? If you don't, you need to wire.

It must be a problem with the interface in you, you open the chassis and check the interface.

1 The forward output port cable is not plugged in with audio

2 Setup Issues.

Laptop plugged into the headphone microphone does not work with workaround steps:

Check whether the sound card, cable, speaker and other devices are connected properly; Run antivirus software to disinfect the virus.

Right-click "My Computer" --Properties -Hardware"--Device Manager", open "Sound, ** and Game Controller" if there is any problem, that is, see if there is a yellow ""If so, reinstall the driver of this device to solve it.

When there is no sound and no speaker, open the control panel--- add and remove programs--- add and delete Windows components, put a check mark in front of "Accessories and Tools", click "Next", and then, shut down and restart, the system will prompt you to install new hardware, follow the prompts to install.

Double-click the small speaker--Options--Properties--Put the hook in front of the "microphone" to adjust, uninstall the sound card driver, reinstall or upgrade the audio driver;

When the sound card driver is installed, the "AC chip cannot be found" prompt appears, it may be that the computer is poisoned, or the sound card driver has been deleted by mistake due to illegal operation, or there is an internal software conflict The solution is to reinstall the system and drivers.

After shutting down, wait for a while before turning it back on, sometimes the sound problem will resolve itself.

Start - Control Panel - Sound & Audio Devices - Sound, see if it's set to silent, and then select Windows Default.

Click Start Run, type regedit, press enter, this will open the registry, click on hkey-current-user, click on the controlpanel entry, and then click on the beep in the sound under it to change its value from no to yes to restart.

Delete the original account, create a new account, so that there is a sound, it may be a problem caused by an error in the user profile, you can open the guest user guest first, start again to see if there is a switch sound, if there is any, you can use the above method, first to create an administrator account, and then click on your account with the problem, and then follow the prompt to delete, in the process of deletion it will also prompt whether to keep the original account files, When deleting it, it's a good idea to back up your favorites, as well as the folders created by the installation software in the start menu, and then copy them back when you're done.

There may be several reasons why the computer can't use the microphone after plugging in the headphones:

The audio input cable of the microphone does not match the headphone socket, causing the audio to not input to the microphone properly.

Your computer's drivers may be corrupted, causing your microphone to not work properly. You can try to reinstall the driver or upgrade the driver.

Your computer's audio device is disabled, causing your microphone to not work properly. You can try restarting your system or entering safe mode, and re-enable your audio device.

The audio settings on your computer may have been set incorrectly, causing the microphone to not work properly. You can try resetting your audio settings or seek technical support.

If none of the above methods solve the problem, it is recommended to contact the computer brand manufacturer or technical support for further assistance.

Because the headphones and microphones on the computer are two different jacks, if you only plug in the green headphone jack and not the red microphone plug, of course, there will be an error, and you can only use it normally after the microphone is plugged in correctly at the same time.

I just ran into the same problem, three steps to solve.

Try changing the headphone jack to the back of the case, or change the headphones to make sure it's not a problem with the headphones, and there is still no sound See Step 2.

Follow the prompts, update all the drivers, restart the computer, and you're done.