Tianyu W806 mobile phone standby battery is finished in less than a day, is it normal?

That's a little less. It's only been 6 hours.,That's it for the domestic machine.。。 Let's buy a new brand of electric board.。。 Scud, Hongyi and other brand batteries.

Hello, according to the situation you described.

Today's smart phones generally have a short standby time, and they are basically the same no matter what brand. Basically, if you are on normal standby and do nothing, the time is about 1-2 days, and if you are playing games and surfing the Internet all the time, it will be about 4-5 hours.

Electricity-saving ways to introduce you to some:

First, turn off background programs frequently, which can be especially power-hungry if there are too many background programs.

Third, because the current mobile phone batteries are basically lithium batteries, when charging, the prompt can be fully charged, don't charge for a long time, it's not good for the battery.

If none of the above methods can solve the problem, it is recommended that you contact the local after-sales service center to help you do mobile phone testing, and the address of Tianyu National After-sales Service Center.

It may be a matter of mode, you can't use it when charging, but in fact, it's also for other mobile phones, it's best not to use it when charging. Is it a custom machine or something, there are more programs installed, power consumption is played, and the start is slow.

Did you have enough for the first time you charged? If it is a leakage, you go to the maintenance point to test and try it.

Hello, according to the situation you described.

1.It is normal for a smartphone to generate heat when it is in use. Because the operation of the system, image processing and other programs are completed by the high-speed operation of the CPU in the mobile phone, during the operation, the CPU will generate a certain amount of heat, which will be emitted through the shell of the mobile phone, and the human body will feel that the body is very hot.

When our mobile phones leave the factory, they have passed the testing of the national quality supervision department and meet the national industry standards, so you don't have to worry.

We also recommend a "memory accelerator" software that can help you optimize memory and turn off software running in the background to reduce CPU usage.

2.If there is still a problem after trying the above methods, it is recommended to go to the repair station to test the mobile phone, and it is recommended to contact the Tianyu after-sales service center, the address of the Tianyu national after-sales service center.

That's it if the quality is too poor, it's best to return it, be careful that the battery overheating will**!

This imagination is normal is not recommended to change the machine can be replaced by a new machine.

Which is better, W806 or Tianyu W700? Ask the master to give a detailed explanation! Ask for 700 to say that the ugly point is a guinea pig, the experimental product crash black screen phenomenon has appeared on Alibaba Cloud OS But the wasp that can be solved is the Yellow River's mobile phone application and Internet access,

There's no problem with that.

It is normal for such a heating temperature to not be high.

The power consumption of surfing the Internet or playing some applications is already very large, and the number of cycle charging and discharging of the battery is certain, and the saturation power of the battery will become lower and lower as time goes by.

Hello, it is recommended that you turn off the software that you do not need to run in the management application under the settings menu, and at the same time, we recommend you a "power juicer" software, which can automatically optimize the system memory in the background to avoid unnecessary power waste.

Most of the smart phones are touch screen mobile phones, and now the touch screen smart phones on the market are basically based on capacitive screens, and in the process of using mobile phones, the induction of capacitive screens needs to consume electricity, so this makes them easier to consume electricity than ordinary mobile phones before.

Charge properly. After the phone prompts to be fully charged, the battery will be fully charged for another 1 or 2 hours, and it can be used directly. Avoid charging for too long and degrading battery life.

In addition, it is recommended to save the battery: it should not be stored fully or without power. If you put it for a year and then use it, basically this battery will not be charged.

If it is stored without power, after a few months, this battery will sleep due to low power, and it needs to be activated before it can be used, which is also very "hurtful". So charge 30% or 70% save.

If you feel that it is not the above problem, it is recommended to go to the Tianyu after-sales service center to check whether there is leakage in the hardware circuit.

The address of Tianyu National After-sales Service Center.

To see if there are too many programs running in the background, it is recommended to get a battery manager or something like that to check what consumes the most power and turn it off!

Backend software. The best thing to do is not battery saver software. Listen to me, restore the system, and try to install as little software as possible, because a lot of Android software can't be killed.

Enter recovery mode, double clear and reboot.

You can flash the machine to try it, and if it doesn't work, return it!! Check it out on 592zn!!

In this case, it should be that there is a problem with the system, and you should find customer service to flash the machine.

Battery problems, set the screen brightness to automatic, wifi gps is usually turned off when it is not used, and bluetooth.

This is the reason for the system, you can consider flashing, and it's okay after flashing, believe me.

You see if you are always playing games, the background program is always on, etc., if not, it is recommended that you take it to the workshop to do a check.

Hello, according to the situation you described, it is recommended that you try it by following the methods below.

1) The standby time of the mobile phone and your usage habits (often listening to songs, surfing the Internet, playing dots**, etc.) and the strength of the local signal have a certain relationship.

3) The cloud system optimizes the memory with one click through application management to end the background running program. On Android, press and hold the Home button to end the program in the end.

5) Smartphones generally consume more power than ordinary mobile phones, and the standby time of models of other brands can be compared with the same kind.

6) If the user is useless after normal charging, the battery is relatively consumed, it is recommended to contact the maintenance station.

The address of Tianyu National After-sales Service Center.

Generally, those apps that come with the phone secretly consume power in the background of the mobile phone. It is recommended to get the root permission of the phone to block the brother.,And then put the pre-installed apps on the phone.,You see which ones are not to uninstall the spike and drop.。

Hello, according to the situation you described, it is recommended that you do the following:

1. Please try to replace a battery first;

2. If there is only one battery, it is recommended that you use the computer to connect the mobile phone to charge later, there will be no charging display at that time, and the battery needs to be activated for about 2 hours.

3. If it still does not appear, it is recommended that you send it to the Tianyu authorized maintenance station for inspection and processing.

The address of Tianyu National After-sales Service Center.

Take it to the after-sales service to check if it's a problem with the battery! If there is no problem with the battery, just ask him to activate it for you!

The battery has been useless for too long, the lithium ion seems to be "dormant", activate the professional tool, buy a new battery, anyway, it is not expensive.