How much can the Sempron 2200 be overdoubled?

Can be super, but it is of little significance, if you really want to supercede, it is recommended to over-double, do not over-frequency, the average person often can't grasp the frequency, and you have to take the risk to test many times. It's more convenient to multiply, but you'll want to make sure your octave isn't locked. Generally enough.

Don't be overpowered! A few upstairs are not rigorous.

The same CPU model has a lock multiplier and a non-lock. Super-frequency is recommended.

If you find a black screen, restart, instability, etc., you can add voltage appropriately.

The frequency multiplier of almost all CPUs is locked and cannot be changed, so it is impossible to over-multiply, and can only be super-clocked by changing the external frequency. As for how much it can exceed, it is necessary to make a comprehensive decision according to the quality of your motherboard and the heat dissipation capacity of the fan, others can't help you, add some voltage, set an external frequency, if the system is unstable, reduce a little, and add a little more stability, through your own repeated tests, to find a maximum frequency that can make your CPU run stably.

The CPU frequency algorithm is: frequency doubling x front-side bus, and 2200+ is the CPU that locks the frequency multiplier, and the frequency multiplier can only be reduced, so please set the front-side bus frequency little by little to improve the CPU flat rate.

I want to be tough!! It's dangerous!!

Let's add an external frequency!!

If nothing else, it should be possible to go up to 2600+

Overclocking has no noticeable effect, so it is recommended not to take risks and make do with it!

My computer uses a Barton core 2200+ (the original external frequency is super to no problem, but in the summer, sometimes after running large software will crash In the case of power permitting, I recommend that you exceed the external frequency to about 2G.

Modern strips, the market seems to be teasing the ruler can not be found**.

So your machine becomes a memory problem.

Suggested Pikai to change the ** memory.

Sell your two.

It should be okay for others to drop to 266.

But your mountain-high CPU is 166 external frequency.

So it's best to use DDR333 or higher memory.

to be at its most effective.

Now Sempemp 2800+ is a lot of overclocking.

I feel that the super to 250 is more suitable for 250*8 2G performance improvement.

The doubling can only be adjusted downwards, and there are some cattle who exceed 300*8 or higher.

The Semptosaurus 2800+ is 754, which is not suitable for you.

Judging from the value of the upgrade alone, 30 yuan Yesan has been upgraded from 1700 to 1800 main frequency, the architecture is still new, and this bend is relatively calculated.

If you are not an enthusiast and pursue a limit of hardware play, I suggest you do not overshoot. It is equivalent to an electric light, if you increase its power supply voltage or current appropriately, it will be quieter and brighter, but the consequence is that the life span is shortened.

Of course, proper overclocking can speed up the operation of the microcomputer, and this limb makes the scum also have to have the motherboard and memory to cooperate.

Generally speaking, overclocking doesn't have much effect.

It is recommended not to roll the brother.

If you don't get it right, it can also damage the CPU

AMD's CPU voltage is quite high, and the temperature is high.

The overclocking temperature is not good, don't burn the CPU in the eggplant, just keep it in check.

Older CPUs can generally be overtaken.