Can two computers access the Internet through broadband routing, and can they directly establish onl

Yes, write it in the runtime"The other party's IP"Can.

Yes, as mentioned upstairs: set the IP of the two computers to the same network segment, and set the router as the gateway.

For example: ip: the other is set as.

Subnet Mask: Default Gateway:

Then you set the router to :ip:subnet mask:

It is best to set the default gateway to the same IP as the router.

If you set up sharing, the other party can see it, and if it is an XP system, it has a shared folder.

Look at what operating system too.

If both are xp...

1Turn off the firewall.

2. Share the files you need to share directly.

On the other computer, you can view the shared file on the other computer's online neighbors!

No need to build. As long as it is the same network segment, it can be directly accessed.

Enter the IP address of the other party in the Start -> run.

You can set the IP of the two computers to the same network segment and set the router as the gateway.

Yes, set the same IP range, set it to the same workgroup, and you're done.

It's okay for you to have the same working group on both computers.

No, you have to use routing, the route will dynamically distribute the address to all computers connected to the route, and the switch is just an extension of the interface, if you connect the cat to the switch, then the IP of all computers of the switch will conflict and cannot be networked.

It is not possible to use a cat directly, a router can save you the cost of opening an account with a router equivalent to an expander.

The router is used to connect different network segments, different LANs, and is connected to the external network. A switch is used to connect a computer to a local area network.

Routing is equivalent to a systematic device, which is easy to manage and set up. Switches are only used for "exchange", so there must be routes. However, the 24-port route seems to be difficult to find.

Cats can only dial up the Internet (only one computer); The routing path is converted (powerful) and other connection points are released; The switch (as if it were a molecule) is a direct split multiple interface (no conversion function).

The router is the hub that connects the Internet and the PC, under the premise of a network cable, each PC is assigned an address, if the LAN does not use routing, the PC without an address cannot be connected to the network. If you want to find a route with 24 ports, it's really hard to find.

There are not many ports in general routers, and 24-port routes are also very rare.

Therefore, the route + switch method is usually used for networking.

The cat switch can also share the Internet, provided that the switch has the function of NAT conversion, and the switches with this function are all core switches, which is quite high.

A router is a server that replaces the past.

Because it can save costs.

As long as you use a machine to dial the number, and then**out**out, the following machine can share the connection, and now use the route instead of the original case of using a computer to do **, the advantages of routing are power saving, low noise, stability, small footprint, etc.

No, you have to use a router. Look at the picture.

It's all right, no problem.

Routers are mainly used to establish addresses.

If your cat has a routing function, it can be directly connected to the switch.

If your cat does not have a routing function, you may set a computer as a **Internet server, that is, to play the function of routing, you can also.

If you can't use the above methods, you can only add a router in the middle as you said, otherwise 20 computers can't surf the Internet at the same time. Don't ask why, just look at the network for yourself, especially what the role of routing is.

In fact, the one named Nie Feng has already explained it in detail. It's just the hardware side. If you are using Telecom's broadband pass, then you have to use your computer to access the Internet as early as the latest version of the new dream broadband pass, and then you can access the Internet at the same time.

1. The desktop is connected to the notebook with a network cable.

2. The notebook automatically obtains the IP to connect to the Internet first, and then checks the IP and gateway. Remember! Then manually set the IP of the wireless network, and change the DNS to the same as the gateway (remember).

Turn on the local connection of the notebook and set the IP, which must not be on the same network segment as the wireless connection (for example, if the wireless IP is set to, the local one can be set to a different network segment). The gateway DNS should be the same as the IP address of the wireless connection (eg.

3. The local connection of the desktop, the IP should be different from the local connection of the notebook (e.g., the IP address of the local connection of the laptop for the gateway and DNS (e.g., the IP address of the local connection of the notebook (e.g., the local connection of the notebook) for the gateway and DNS.

4. Restart, OK can access the Internet on two machines at the same time.

If you don't understand, ask me again. Hope it helps.

Same as wired. You can try your current online neighbors who can find your computer to share.

There is no need to set up, just connect it directly with a network cable.