Help, odin flashing stopped at boot img for a long time and didn t move

Your drive is not properly installed.

2. Then copy it to the SD card or the phone's memory. As long as you remember the location.

3.Enter the recovery method: Press and hold the volume plus + home (home button) + power on (power on button) one by one in order, and release all the buttons immediately when the boot screen appears (about 5 seconds).

4. Shuangqing (volume key selection, power button confirmation), as shown in the figure below.

First, select Wipe Data Factory Reset - yes - Delete All User DataThen select wipe cache partition - yes-wipe cache

5.After the double clearance is done, select the volume button"install zip from sdcard" .Power button OK.

6.Select again"choose zip from sdcard" or "choose zip from internal sdcard"

Look at yourself to put the previous flash package ROM file in ** (the former SD card, the latter built-in storage).

7.Then select the ROM file you just put in.

8.Wait for the progress bar to finish, and the bottom display is the completion of the flash.

When you're done, go back and select Reboot System Now, and your phone will reboot automatically.

2. Insert a USB flash drive into the desktop computer that needs to be flashed, and after restarting, keep pressing F12, F11, ESC and other shortcut keys to open the boot menu, and select the USB flash drive item Enter, such as General Udisk.

3. Start from the U disk to enter this menu, select the (new model) option through the arrow keys, start the PE system, and select the old model to enter.

4. Enter the PE system, if it is a newly assembled desktop that needs partitioning, double-click to open the [DG Partition Tool], right-click the hard disk, and select [Quick Partition].

5. Set the number of partitions and the size of the partition, generally C disk is recommended to be more than 35G, if it is a solid state disk, check the alignment partition to be 4k aligned, click OK to execute the hard disk partitioning process.

6. After the hard disk is partitioned, open [Chinese cabbage one-click installation], select the system ISO image for the image path, and the GHO file will be automatically extracted at this time, click the drop-down box to select the GHO file.

7. Then click "Restore System", select the system flash location, generally C disk, if it is not displayed C disk, you can choose according to the "volume label" and disk size, click OK.

8. This prompt box pops up, check "Restart after completion" and "Boot repair", and click Yes to start flashing.

9. Go to this interface and perform the operation of system restoration to C drive, this process takes about 5 minutes.

10. After the progress bar reaches 100, the computer will automatically restart, at this time, pull out the USB flash drive, restart to enter this interface, and continue to perform the process of brushing the system and system configuration.

11. The flashing process will be restarted 2-3 times, rebooted into the new system desktop, the computer flashing system process is over, the system is automatically activated, no need to reactivate.

2. Click to reinstall the system, one-click installation, and the software will scan and check the hard disk information.

3. Select the software, files, etc. to be backed up.

Method steps.

Click "One-click Installation", and the software will scan and check the hard disk information.

Select the software, files, **, etc. you want to back up to prevent loss.

Step by step: Read end

It is not recommended to flash the phone.

After flashing, the phone may not be in the best working condition, and some functions may not work normally. At the same time, because the third-party firmware is not fully tested, there may be problems such as poor compatibility and system susceptibility to virus intrusion.

Flashing will bring unforeseen negative effects, so be cautious. If the device cannot be used properly and cannot be restored, you do so at your own risk.

For software and hardware failures caused by flashing, Huawei's after-sales maintenance outlets can handle them as non-warranty and charge them for ordinary out-of-warranty software maintenance.

The computer is not called flashing, it is generally a reinstallation system. Some brands of computers are reserved for the original system backup when leaving the factory, and the option of whether to restore the backup will appear when the computer is turned on! If you want to flash the machine, you can directly select Recovery.

That is to reinstall the system for the computer, for beginner users, spend five to ten dollars to buy a system CD, one-click reinstallation is a good choice.

You need to make a USB flash drive boot program on other computers, if not, then buy a system disk or find someone else's computer to make it and then install the system.

According to your own needs,Is it to brush XP、Vista or Win7,If you don't require genuine words, spend a few yuan to buy a system disk,The computer is set to start the first boot for the optical drive,Restart the system,After reading the disc, you can operate according to the disc prompts!

Do you want to ask if the computer can be used to flash the computer or if the computer can be flashed... If you ask about the former, then what you are talking about is the line brush, if you ask the latter, then I can tell you that the computer is called a change system, not a flash.

Many brands have one-click restoration; Just assemble the reassembly system.

The mobile phone is called flashing, and the computer is called reloading the system.

I forgot my computer's password and wanted to flash it.

1.Open the AISI Assistant software, click "Flash Jailbreak" at the top, and select the iOS version you want to flash in the one-click flash.

2.Check Keep user information to flash the machine, click "Flash Now", and you can see the current flashing information in the flashing reminder.

3.Click "Confirm Flash", click on the upper right, check the current progress, and wait for the flashing to complete.

2. When flashing the mobile phone, you must make sure that the mobile phone has sufficient power, otherwise it will easily lead to insufficient power in the process of flashing, resulting in the failure of shutting down and flashing.

4. Secondly, install the flashing software, then open it, connect the mobile phone data cable with the computer, and the flashing software will automatically detect the connection with the mobile phone.

6. Finally, follow the prompts to perform the corresponding operations, wait for the flashing to be completed, and after the brushing is completed, it will prompt the flashing success.

3. Open the flashing wizard.

4. Connect the mobile phone data cable to the computer.

5. Go to the ROM market and choose the system you want to brush.

How do you flash a Huawei phone? It's easy to operate without a PC!

Install flashing software such as Flashmaster and Flashing Genie on the computer, then connect the phone with a data cable to the computer, and then wait for the software to recognize the phone, and follow the prompts on the software interface to complete the flashing after the identification is completed.

I hope my reply helps!