What does it mean when the intercom says you don t have a full call?

The walkie-talkie shows that you do not have the right to call, it should be that the method you use is incorrect and use it according to the normal operation, and you do not have the right to call, which means that you use the operation improperly.

If the walkie-talkie doesn't call, it's possible that there are still damaged parts inside him.

It should be that the signal cannot be received or the walkie-talkie, it is too far away and the distance is not very close.

When you use the walkie-talkie, it shows that you have no permission to call, which means that your current channel is not controlled by you, but has a switchboard, you need to call the switchboard first, and go to other extensions.

What does it mean when the intercom says you don't have permission to call? That means that this walkie-talkie is recognized, and when he sees that you are not the person, he will say that you have no right to call.

This means that the number you entered is different and inconsistent, and you should not be able to call.

The intercom shows that you can't call, it may be because there is no signal, and you can return to normal in another place.

That is, you are not connected to the internal line of the walkie-talkie at all, so you have no right to call.

What does it mean that you don't have the right to call? I just want to show that you are in the state of jewelry for no reason, and your life characteristics are normal.

You may have been blocked in the system settings.

So you don't have the right to call someone.

If it is displayed on the intercom, your whole house call means that no one is calling you, it may be because you have no signal, or it may be that the intercom is out of power, so there is no way to contact.

This means that you do not have the privilege to call the other party's walkie-talkie.

What does it mean when your phone says you don't have the right to call? The walkie-talkie can be heard if it does not fail when calling within 200 meters or within 500 meters.

The intercom shows that there is no call at all because the other party is not within the range of your call and the audio cannot be received.

The walkie-talkie shows that you are not authorized to call, which walkie-talkie should be used only after it has a password setting or some operations.

The background is that you don't have the right to call, which means that it should be designed by the other party, and it will be like this if you call him.

That is, you are all your ex-husband, what do you mean, so it means that the captain has to make a call on both sides for both reasons?

The intercom shows that you don't have permission to call. I just don't have the right to call. Can't you call this is the system? Not passed.

The walkie-talkie shows that you have no right to call, it should be the user you are calling, you have no right to call him. Didn't connect with him. Du Yi, Jiang Ji should be connected first, and they all bring a channel, if they don't get it right, they won't be able to call.

If the caller ID of the mobile phone is unknown, there may be the following reasons: 1If this is the case with individual **:

1).Maybe the other party has turned on a function like a hidden number 2).The other party may call through unconventional channels, such as through the Internet**.

2.If this phenomenon occurs in all **:

What does it mean when the walkie-talkie shows a gift right call? That's the incomplete layout of your call, what you called, what you should tell your full name.

If the walkie-talkie shows that there is no full name, he will usually draw one for you.

If there is no problem with the machine itself, it is a sub-audio problem, which is the so-called encryption processing, and any walkie-talkie can check the frequency between you and the sub-tone setting without a problem!

Did you not set it up? So there's no way to call people.

What does it mean that the walkie-talkie shows that you have no right to echo, I think this situation occurs because your walkie-talkie is faulty, so it will be such a situation, and it should be re-checked and used, I think it will not affect your normal operation.

Maybe you don't have enough permissions.

As a result, if you go back to Xuanwu, it must be because of the distance range of the two people who made the call. If you let it, there will be no information.

Show that the other party did not call successfully, the use of walkie-talkie must have signal coverage, and the other party responds to each other.

It's that your business for this call is restricted.

What does it mean that walkie-talkie enjoyment you don't have the right to exhale? It's possible that your setup is wrong, or that you're not connected to the bit.

Is the video intercom call failing? It can be divided into two scenarios.

There are two scenarios for call failures:

1. Both visual calls and voice calls fail, mainly because of the following reasons:

1) If you are in a blind spot.

Or suddenly there is no signal, it is recommended that you turn the computer on and off again;

2) If the contact of the mobile phone is poor, it is recommended that you change to another mobile phone for testing.

2. The visual call fails, but the voice call succeeds. Mainly because of the following reasons:

1) The terminal of the called user does not support the video sail song service;

2) The calling or called user is located within the coverage area of the 2G network, or the resources of the 3G network are insufficient to support the visualization**;

3) The called user is a sedan chair for other operators who have not had visual communication with China Unicom;

4) The called user rejects the pants and chooses voice answer.

It may be because the other party is on a call, a blacklist is set, the other party hangs up directly, and the base station line is busy.

1. If there is a beep after dialing **, and then suddenly there is a prompt that you are dialing ** is on the call, it means that the other party hung up directly.

2. If there is no beep after dialing **, you will be directly reminded that the ** you dialed is on the phone, indicating that the other party is on the call.

3. If every time you call**, you are reminded to dial** is on a wild Zen call, it means that the other party has set you to a blacklist, or it is the same number of beeps every time it appears on the call, which is also set to the blacklist.

4. Explain that the base station line where Dianpiyanhua is located is busy. Because**through the base station call, each base station has a limit on the maximum number of calls at the same time, after exceeding this number, and then dial in the coverage range of this base station**, you are dialing**is on the call.

Related information

In general, the performance of the intercom mobile phone itself and the surrounding environment are the main factors affecting the communication quality of the intercom mobile phone, in addition to the intercom mobile phone battery power is low when the call quality will also become poor, serious noise will appear to affect the normal call. Therefore, in order to avoid the impact on the quality of communication, users should try to avoid these influencing factors in the process of using intercom mobile phones.

In addition to the fixed base station, there is also a common "mobile base station" we often see, that is, the mobile base station car, this kind of mobile base station car will often appear in the densely populated places of urban high-rise buildings, their main role is to supplement the coverage of radio signals, so that we will not use mobile phones when there will be "no network" situation.

The mobile base station vehicle is small in size and footprint, but its radio signal coverage is generally that the pollution caused by the dust in the full working state will be more serious than the surrounding neighboring people, so it only plays a role in temporarily filling the blind spot, and the situation of long-term fixed existence in a certain place generally does not appear.

What you said is a bit cold, the same frequency or different frequency? The following aspects are mainly examined:

1. Mute setting. Whether yours has set the transmit mute, or the other party has set the receive mute.

2. Whether it can be received at close range. Check if the distance is exceeded and the other party cannot receive it.

3. If it is a different frequency, check whether the frequency difference and the difference frequency mode are set correctly.

4. If it is a different frequency, it can only work in channel mode, not full range mode or frequency mode.

5. Check what mode the transmit power is in, and set the high power mode to try it.

6. If all of the above is a problem, have you ever launched with the antenna removed? When there is no antenna for high-power transmission, the transmission module will be burned.

The single call function of the walkie-talkie can't call what's going on, hello dear, 1. There are several reasons for this problem: there will be incorrect settings, and it will often be cut off when the signal is weak due to the high noise setting of the year, or the power setting is low and the relay cannot be opened. 2.

If the personnel are too close to Lao Yu, the channel will be blocked during communication and the squelch cannot be turned on, or the relay cannot be turned on if it is too far away. 3. Setting subtone causes a reception delay. If there is an error, please describe it in detail.