This walkie talkie and other walkie talkie brand walkie talkies, can you talk?

The frequency is right, and the frequency of one shift is wrong.

There should be a good conversation between them.

Screamed and opened his crotch pants to take a look.

High quality can only be selected if you know the inside, and the selection requirements are very high. For details, please refer to:

What is Premium?

I know that the outstanding will be selected and marked as "high-quality answers" to recognize the contributions of friends, and also to facilitate the dissemination of better knowledge and let everyone learn.

Quality Q&A standards.

How to self-recommend quality?

Every Monday, we will open a weekly self-recommendation post in "Know", and reply to the self-recommendation post in the following format:

a.Self-sponsor ID:

b.Specific classification of self-recommendation questions:

The privilege of a quality answer?

For example, when you ask a question, you can also bold and red the font to show a more distinctive excellence.

What else is there to suggest about this?

<> different brands of walkie-talkies can talk to each other, but it should be noted that if different brands of walkie-talkies want to talk to each other, they need to change the frequency of the walkie-talkie to the same, and then you can modulate the call, which is also more convenient.

Walkie-talkie skills: When using the walkie-talkie, if the user wants to use the walkie-talkie to talk, the first thing to turn on the walkie-talkie is, just find the rotary button above the walkie-talkie, the number is the FM button, and the switch option is the switch button.

After turning on, the two walkie-talkies should be adjusted to the same frequency band, and then press the dialogue button to speak, but it should be noted that do not let go when holding the key to speak, and let go after speaking.

If you want to adjust the volume of a call, you can simply turn the power button to increase or decrease the volume of the call.

Different brands can generally make calls, and the sub-frequency bands of the machine can be docked. Frequency, subtone consistent words. You can make a call. You can do it as follows:

1. **Frequency writing software. **When writing frequency software, first look at the brand and model of the walkie-talkie you purchased, and then go to the official or third party**according to the model** required frequency writing software, as shown in the figure below for the official Coolis walkie-talkie**.

2. Some foundry walkie-talkies do not have an official **, **, just ask the dealer to ask, but there are also dealers for their own interests, and will not necessarily provide us with frequency writing software, at this time, it depends on the individual's ability. After the writing software is installed in hand, we can start the writing operation. Open the frequency writing software, and the interface of the frequency writing software is shown in the following figure.

3. Reading frequency. Turn on the power switch of the target walkie-talkie, click "Programming" and "Read Data from Walkie-talkie" of the writing software in turn, open the "Read Data from Walkie-talkie" dialog box, click the "OK" command button, and start reading the data of each channel of the walkie-talkie, as shown in the following figure.

4. After the data is read, the channel information of the target walkie-talkie is obtained, because the pair has 16 channels, so the frequency writing software lists all the information of the 16 channels, as shown in the figure below.

5. Click the "Save" command button on the common toolbar to save all the channel information of the target walkie-talkie, and the file name is named by us.

6. Frequency modulation. Unplug the target walkie-talkie and connect the walkie-talkie you want to switch FM to. First of all, carry out a frequency reading operation, if you can read the frequency normally, it means that the communication between the walkie-talkie and the computer is normal, otherwise you have to check the problem.

7. Click on the "Programming" of the writing frequency software and "Write data to the walkie-talkie (w)", open the "Write data to the walkie-talkie" dialog box, click the "OK" command button to start writing the data of each channel of the target walkie-talkie, after the data is written, the "Write Completed" dialog box will pop up, and click the "OK" command button to close the current dialog box. Then the FM is done.

Difference Between Handset and Walkie-Talkie:

1. Different definitions:

1. Hand station: people's abbreviation for handheld radio. The handset is generally in the FM band, and there are few shortwave bands (such as GP328 338 and MT1000 of Moto).

2. Walkie-talkie: The English name of walkie-talkie is two way radio, it is a two-way mobile communication tool, without any network support, you can talk, no phone bill, suitable for relatively fixed and frequent call occasions. There are currently three main categories of walkie-talkies:

Analog walkie-talkies, digital walkie-talkies, IP walkie-talkies.

Second, the frequency is different, according to the 2001 "People's Republic of China Radio Frequency Allocation Regulations", the legal frequency of the hand:

1. Frequency bands for the amateur service.

2. The amateur service is a frequency band shared by secondary services and other services.

3. The amateur service is a frequency band shared with other services as a secondary service.

4. According to the standard wavelength stipulated by China, there are a total of 73 "dedicated" available frequency points; There are a total of 282 "shared" available frequencies.

Two different brands of walkie-talkies need to have the following conditions to intercom:

1. Have the same frequency: the premise of the intercom communication signal is that the communication frequency set between the walkie-talkies should be adjusted to the same. Different brands of walkie-talkies have the same frequency band, and the walkie-talkies can be interconnected with each other after writing the same frequency through the frequency writing software; The frequency bands are not the same, there are common frequency bands, then the frequency value is set to the same, the same can be intercom.

2. Within the signal coverage: only when the signal can be received can it be interconnected. If it is not within the signal coverage range, even if the frequency is set to the same, it cannot be communicated.

If the signal is insufficient, the signal may be better if you use a high-gain antenna or stand on a higher place, or you can add a repeater.

3. Same subtone: In order to prevent useless signal interference, sometimes the walkie-talkie will be set to receive subtone, when the subtone of the wireless signal sent by another walkie-talkie is different from the subtone of receiving subtone, the walkie-talkie will not be able to communicate with each other.

4. Same key: For the security of communication, a security key will be set for communication. It can only be used if the keys on both ends are the same.

Different brands of walkie-talkies can talk to each other, as long as the receiving and transmitting frequency of these walkie-talkies is set to the same, you can talk.

The walkie-talkie is a two-way mobile communication tool invented by Johnkermode in the twenties of the twentieth century. This device can make calls without any network support, and there is no call charge, which is suitable for relatively fixed and frequent calls. The walkie-talkie has become a very valuable communication tool for users such as police, emergency services, industry and commerce.

How to use the walkie-talkie:

1. There are three knobs used in the walkie-talkie, namely switch, volume, and speech. The knob on the left side of the top is the switch, and it is also the knob for adjusting the volume, the knob on the right side of the upper end is responsible for adjusting the channel, and the button on the side of the walkie-talkie is the talk button.

2. When turning on the machine, turn the switch knob clockwise, and there is an obvious start-up sound. And the indicator light will flash green and then adjust to the appropriate volume.

3. Adjust the walkie-talkie to the same channel, if there is frequent noise, it may be in series with other people's walkie-talkies, and it can be switched to other channels to avoid interference.

4. When receiving communication from others, the indicator light will flash green.

5. When you need to speak, press and hold the send button to start communication, and release the call button in time after speaking.

6. If you use the cradle charger for charging, the charger indicator shows red and does not flash, it is normal charging, and when it turns green, it means that the charging is complete. <>

Yes, but there are conditions.

Under the condition of network support, the walkie-talkie can be used to play **. However, if it is only a regular call between stand-alone machines, it cannot realize the function of making **. The walkie-talkie can talk without any network support, and there is no phone charge, which is suitable for relatively fixed and frequent calls.

The radio frequency and power of the public walkie-talkie must meet the following requirements:

Operating Frequency (.)9000 ; 409.Unit: MHz):

The frequency is different, the frequency of mobile phone is 1880MHz to 3000MHz, and the frequency of walkie-talkie is 100MHz to 500MHz. The higher the frequency, the better the call quality and the higher the accuracy. The walkie-talkie is an analog signal, and the mobile phone is a digital signal. Two different concepts.

Now there is a mobile phone** with a walkie-talkie.

If the frequency is the same, you can adjust each other to the same point to make a call.

Different brands of ** can also talk to each other if they are not the same.

You can't talk on the phone, only the same.