Why are the shoes exported by foreign trade so easy to grow mold, and what should I do if I get mold

First of all, there are many reasons for mold in shoes, such as the material itself is easy to mold, the use of glue in the processing process, storage problems, and so on. These are all the causes of mold resistance in shoes.

Of course, there is also a reason for the mildew of foreign trade shoes is that the shipping time is long, and the risk of mildew in the process of shipping is very high.

In sea transportation, the temperature difference between day and night is large, and water vapor produces "condensation phenomenon" in this large temperature difference environment. Water drips fall on top of the packaging, resulting in increased humidity and an increased risk of mold.

To prevent shoes from growing mold during sea freight, the first thing to do is to control the humidity inside the container. The method is to hang container drying rods in the container, which can effectively absorb moisture in the air and control the humidity within a relatively safe range.

Of course, it is not enough to use only container drying rods, but also to use desiccant and anti-mildew tablets to effectively weave the growth of mold, put the appropriate specifications of anti-mildew tablets in the package, even if there is a little moisture in the package, it can also ensure that there is no mildew, and the anti-mildew factor of the anti-mildew tablets can actively kill the mildew and effectively prevent mildew.

Finally, putting a suitable desiccant in the package is also an indispensable anti-mildew method, which can effectively control the humidity in the package and ensure that the humidity in the package is within a safe range.

Foreign trade shoes are prone to mold, but if the above points are achieved: raw material control, standardized production process, storage environment control, and shipping control. It can ensure that foreign trade shoes do not grow mold.

Take it to the washing plant and wash it all, dry it, and put on the desiccant.

Causes of mold in new shoes:

1. If you buy leather, canvas and other shoes, if the shoes of these materials are not stored properly, it is easy to cause mold due to moisture;

2. When storing new shoes, do not send them together with moldy old shoes, as mold will infect new shoes;

3. The shoes themselves have a nutrient source for mold growth, coupled with improper storage environment, they are easy to mold;

4. It is recommended to store shoes in a ventilated and dry place to avoid moisture;

5. Place a piece of anti-mildew tablet or desiccant in the shoe box and shoes.

Effectively prevent mold in shoes.

There are several main reasons why shoes can become moldy:

Shoes are not cleaned after wearing, and shoes have a lot of stains or foot secretions, which makes shoes more susceptible to mold. The storage environment is humid, absorbing moisture from the air and providing conditions for mold growth.

Long-term storage, not cared for, not ventilated caused.

1.Shoes are not cleaned after wearing, and there are a lot of stains or foot secretions inside the shoes, which causes mold in the shoes.

2.The storage environment is humid, and the shoes absorb moisture, providing an environment for mold to grow.

3.Long-term storage, not cared for, not ventilated caused.

It has bacteria and is damp, and it will naturally become moldy after a long time.

Shoes will become moldy if they are wet and placed in an unventilated place, or shoes that have not been washed for a long time will also become moldy after being placed under the bed for a long time.

The first is that it is not cleaned in time.

In addition, it is placed in a damp place.

Suggestion: Wash cloth shoes and clean leather shoes.

You can refer to the following washing methods for washing moldy shoes:

The maintenance of canvas shoes mainly pays attention to the following points:

1) After washing, put it in a ventilated and cool place to dry naturally. Do not bake in the scorching sun or in a hot place. to prevent unbonding or degumming. Accelerated aging.

2) Non-professional labor rubber shoes do not and acid. Alkali. Salt and other chemical contacts. to avoid corrosion, degumming and deformation.

3) When cleaning, it should be gentle and even. Do not brush too hard. Lest**. Or brush off the pattern and decorative parts of the shoe.

4) Avoid contact with sharp objects. To prevent scratches from scratching the upper body.

5) For white canvas than shoes. Do not come into contact with hard-to-clean items such as carbon ink. Canvas shoes of this color after cleaning.

in the upper. Apply toothpaste to the shoe. or white chalk powder.

Take care to be even. Then cool and dry. Anti-discoloration.

Or find two sheets of clean white paper and put them on top of the shoe, dry them and tear them off. It is also anti-discoloration.

6) The shoes are broken. Disconnected. or loose decorative parts and other small problems should be sent for repair in time. to prolong its useful life.

7) For sweaty friends. Before putting on your shoes, you can spray some vinegar on the inside of your shoes. Reduces odors. In addition, canvas shoes should be cleaned regularly. to prevent mold and smell.

8) Do not wash in the washing machine. Some people believe that espadrilles are resistant to folding. The price is low. Too lazy to hand wash. I don't know that the decorative fabric of the shoe body is not the same as the shoe body. It is easy to peel off and fade when washed in a washing machine. (**Shop provided by Celestial Colours).

Remove mildew: 1Soaking method: Use rice washing water to soak mildew-stained clothes, which can be used for a longer time to remove lighter mildew.

2.Scrub method: Some deep mildew spots are difficult to remove, you can brush the mildew first, then scrub with some alcohol, or prepare a little hot soapy water to wash repeatedly, and finally rinse with water.

After that, just put it in a ventilated and dry place to dry, and don't put it in a damp place again!

The above is just my opinion, thank you.

Answer: The treatment method for shoe mildew is as follows: 1. If the shoes are moldy, they can be wiped with a soft cloth dipped in alcohol and water. After wiping down the moldy area, it can be washed and dried in a ventilated place.

2. Alkaline soapy water can also be used to wash moldy shoes, and then put them in a ventilated place to dry, but do not expose them to the sun in summer, it is recommended to wrap them in a napkin or toilet paper. 3. Shake the wax evenly, pour it on a cloth or toilet paper (not too much), and wipe it directly on the moldy spots on the shoes. 4. For mildly moldy shoes, you can apply a layer of petroleum jelly and wipe it gently.

If the shoes are moldy, it means that they have not been properly treated with mildew prevention when they are stored.

For shoes that have become moldy, the surface of the glossy leather footwear can be wiped clean with a soft cloth, and the transparent shoe polish or leather nourishing cream can be brushed several times with a soft bristle brush. Suede shoes, snow boots, and flannel shoes should be protected from drying in the sun, and a soft cloth should be used to remove mold and dead bodies. Use a shoe dryer to dry the shoes and then use a hair dryer to clean them, or you can directly use hot air to dry, pay attention to the temperature should not be too high, and the time should not be too long, otherwise it will be easy to degum.

When storing, you can put activated carbon packets on the inside of your shoes, or you can stuff more dry paper towels or newspapers. Put each one into a separate food bag and tie it tightly before putting it in a shoebox, and put more tissues or newspapers in the shoebox. If possible, you can replace newspaper or activated carbon with desiccant.

May your beloved shoes rejuvenate.

Cloth shoes must be cleaned and dried, and stored in a dry place. Leather shoes should be cleaned of dirt, put some shoe polish, put in a shoe box, and place in a dry place. If it has become moldy, it should be washed and dried, and then it should be processed and collected. Hope it helps you a little.

If it is leather shoes, clean them with shoe polish, and then put them in a ventilated place to dry, and be sure not to expose them to the sun, which is easy to deform and have quality problems.

1. If the shoes are moldy, you can wipe the shoes with a soft cloth dipped in alcohol and water, wipe the moldy place, brush it, and then put it in a ventilated place to dry.

2. You can also use alkaline soapy water to wash moldy shoes, and then put them in a ventilated place to dry, but in summer, do not expose them to the sun, it is recommended to wrap them in a napkin or toilet paper to dry.

3. Shake the wax evenly, pour some on a cloth or toilet paper (not too much) and wipe it directly on the moldy spots on the shoes.

4. For mildly moldy shoes, you can apply a layer of petroleum jelly and wipe it gently.

Take it out to the sun and keep it dry.

1. New materials, materials with heavy oil content, have become a breeding ground for some oil fungi, fungi and molds;

2. The European Union strictly restricts the use of pesticides, preservatives, etc., so that a large number of bacteria and molds can survive;

3. The promotion and use of environmentally friendly water-based dehydration provides nutrition and food for the reproduction of mold;

4. For sea transportation, the temperature and temperature vary greatly, which increases the risk of moisture and mildew of the product.

You can refer to it.

There are several main reasons why shoes can become moldy:

1. The shoes are not cleaned after wearing, and the shoes have a lot of stains or foot secretions, which makes the shoes more likely to mold.

2. The storage environment is humid, absorbing the moisture in the air and providing conditions for mold growth.

3. Long-term storage, no care, no ventilation.

You can use anti-mold tablets or desiccant to dehumidify and prevent mold from your shoes.

Generally, mildew is caused by moisture, so it is good to wash and dry more.

Because it is caused by moisture, it will be fine to wash and dry more.

1. Shoes soaked in rain or sweat feet are seriously damp and stored without air drying, which is easy to mold and mildew.

2. When it snows, the leather shoes are picked in the snow, and the snow water soaks the leather surface, and there will be mold marks after drying.

3. If there is cement slurry on the ground and the skin surface is not treated immediately, there will be mold marks after drying.

If you have sweaty feet, put the shoes in the shoe cabinet if they are wet, or the environment around the shoe cabinet is damp.

Improper care, shoe polish is recommended.

Do you have sweaty feet, only damp things can get moldy, huhu.

The sweat inside is not fully volatilized.

1.First of all, put the moldy shoes on the table, use a brush to dip the detergent, wipe the moldy place, there is no mold where there is no need to deal with it, the effect of this operation is to clean up the mold and fungus ash on the surface of the shoes, and kill the bacteria in one place.

2. After cleaning, spray a layer of anti-mildew agent on the surface of the shoe, be sure to spray the entire upper to control the place that is not easy to see, and then pack the shoes after spraying and drying, and the whole shoe is moldy.

3 The above is a large-scale processing of shoes in the factory, family personal shoes, directly wipe with a nursing paste with cleaning function, generally direct cleaning with water will lead to a decline in leather quality, and you will find that moldy shoes even if they are cleaned with water, they will continue to be processed after a few days when they are taken back indoors, because the fungus on the shoes has not been killed.

4.When the shoes are moldy, we must control the dead angle when spraying, so that it can play a good role.

Some antifungal agents may cause a small number of people** to be allergic, so it is recommended to wear a mask and rubber gloves when turning over the box.

What should I do if my shoes are moldy?Teach you not to wash with water or to dry, and the shoes will immediately look like new.

What should I do if my shoes got moldy last year?Don't wash it with water anymore, teach you a trick, and it will look new immediately, I hope you like it, thank you**

Shoes moldy with alcohol and water wipe off a few days and then grow back, with a towel or brush dipped in Guangzhou Aihaoer iheir-clean to wipe the mildew, and then spray on iheir-spray, will not grow mold.

Moldy shoes must be dealt with in a timely manner, you can use hot soapy water to do processing, such as constantly brushing the surface of the shoes, you can change the status quo of moldy shoes to varying degrees, and the folk also have some partial skills, such as scrubbing with the white rod part of mung bean sprouts, and then rinsing with water, you can also remove mildew. If you hate these troubles, then you can buy a bottle of Meiboss mold remover, his mold removal principle is not more than ten minutes to quickly bleach the black mold spots, but the solution reacts with the mold, the mold is completely killed, removed and decomposed, so that the surface of the object naturally restores its original color. It does not damage the material and will not cause discoloration or discoloration of the material.

Do not put the shoes in the water to brush, nor can you put them in the sun to dry, that will deform the shoes and open the glue.

The surface should be wiped off with a damp soft cloth, placed in a cool place to dry, and then rubbed with a thick shoe polish.

The next time you store your shoes, you can put some desiccant to prevent moisture.

Clean it first, then sprinkle some liquor inside, and don't be afraid to have more. Put it in a ventilated and backlit place (just don't dry it) and let it air dry naturally.

It's best to have some old newspapers or something inside, and it won't be deformed if it dries. (Wait until the wine is almost dry, e.g. 1 2 hours later).

Wash it, otherwise you will sell it second-hand.

Take it to the sun and then wash it.

Take it out to the balcony and let the sun bask or blow it down with a hair dryer.

Me too, a pair of Anta is moldy and reluctant to throw it away.