What is the purpose of a throttle lock?

The function of the throttle lock is to turn off the power, which is used when the engine is turned off and landing, and it is also useful when landing. The electric throttle lock value is set to 0, and the oil throttle is set to 0 because the engine must remain idle when the engine is turned off and landing, so the throttle servo lock position must be adjusted, which cannot be 0. The oil engine locks the throttle is called throttle hold, and completely closing it is called throttle cut, and the motor does not matter.

View the original post

The combustible mixture in the cylinder increases.

Because when you press the accelerator, the engine speed increases, and the wheel speed also increases, so the car becomes faster.

For manual cars, the throttle and gear generally cooperate with each other; For automatic cars, first press the accelerator to the end, and then release it and add it slowly.

When stepping on the accelerator, the mixture of air and gasoline burned in the cylinder is more, the explosive force is strong, the pressure on the piston is large, and the driving ability is strong.

By controlling the amount of pedaling, the engine throttle opening is controlled, the air intake is controlled, and the computer controls the oil volume, so as to control the speed of the engine.

Throttle, also known as "damper", "throttle". Refers to a control device that controls the power (thrust) of an engine. In piston aero engines, the throttle controls the throttle opening of the carburetor to control the amount of cylinder filling, which determines the engine's power output.

On gas turbine engines, the throttle controls the metered fuel flow at the fuel regulator, which determines the thrust generated by the engine.

The throttle position is controlled by the driver in the cockpit by operating the throttle stick, which is transmitted to the carburetor or fuel regulator on the engine through the lever, rocker arm, torsion tube, steel cable, pulley, fan wheel and other control system components. In an airplane, the throttle stick maneuver always pushes forward to increase the power (thrust) and pulls back to decrease the power (thrust).

Hello, happy with your question. The main function of the car throttle is to accelerate the car, and if you don't use the accelerator, the speed of the car is the original speed, which is very slow. Therefore, the role of the car throttle is mainly to accelerate the car.

The lower the throttle pressure of the car, the greater the fuel intake of the engine and the faster the vehicle speed.

The accelerator pedal of the automobile engine is generally controlled by the pedal, also known as the accelerator pedal, which is a device for controlling the oil supply of the automobile engine.

The control of the accelerator pedal should be done with the right heel on the cab floor as a fulcrum, the sole of the foot lightly on the accelerator pedal, with the ankle extension and flexion action, pedal down or relax. When stepping on the accelerator pedal, apply gentle force and lift gently.

When starting the engine, do not press the accelerator pedal all the way down, slightly above the idle throttle as well. At the start, refueling should be slightly before the clutch linkage point, and the throttle opening should be small to medium. Relax the clutch and step on the accelerator closely, and the action is agile.

Pay attention to safety when driving, look

Yes, the amount of fuel supplied to the combustion chamber by changing the carburetor through the throttle, thereby changing the output power and torque of the engine while changing the speed. So the most straightforward way to say is to change the speed!

The amount of fuel supplied to the combustion chamber by the throttle is changed by changing the carburetor, thereby changing the engine output and torque at the same time. So the most straightforward way to say is to change the speed!

To put it simply: the throttle controls the opening of the throttle. The throttle valve is on the engine intake manifold.

Rotundity. With the different throttle openings, the amount of mixed gas of oil and air is controlled, so as to control the engine power. That is, the speed of rotation.

To put it simply, the throttle is a device to control the speed, and when the engine is doing work, the throttle can control the amount of engine energy, so as to control the running speed of machinery and equipment.

The power output of the engine is controlled (increased or decreased) by the amount of oil and air intake.

Increase or decrease the amount of fuel intake to control the speed change of wheel speed.

The throttle is used for acceleration, and if you don't use the throttle, you are using the car's original idle speed. Now it's because you've just learned to drive, first the pile, then the field, so you don't need to gas pedal! Coaches generally consider the throttle to be dangerous, especially for novices!

For the pile test, the throttle is not important! Some of the venues are on the throttle, and the road test must be done with the throttle!

Of course, it is used to take revenge on society, and it can also kill the enemy.

The throttle controls the amount of fuel supplied to the engine.

The throttle is used to speed up while driving.

Car throttle? Step on the accelerator to accelerate.

Powering the car and increasing the speed of the car

How can you go without the throttle?

The throttle is quite useful. The instantaneous power of the car depends on the size of the accelerator.

Coaches generally put the clutch adjustment output of a large amount of oil, can only control the clutch to provide the oil needed for a gear, but to accelerate, you have to rely on the throttle.

There are two main reasons why I haven't let you use it:

1.Familiarize students with the relationship between the clutch and the car, 2Prevent accidents caused by excessive power when you press the accelerator.

Accelerator acceleration, brake deceleration, clutch shifting, ask questions like this, let's play with it.

The function of the clutch is to separate the transmission force between the engine and the gearbox, which is conducive to the gearbox shifting.

Brake: It is a deceleration device, which can slow down the car.

Throttle: The throttle is the speed at which the throttle is opened to allow the oil-gas mixer to be injected.

The clutch pedal is an important installation to be operated with the foot, and the key to controlling the clutch is to master the joint point of the clutch. It is easier to disengage the clutch, just press the clutch pedal quickly and orderly, without pause, so as to prevent the clutch from slipping and accelerating wear.

The brake is installed on the wheel hub with the brake cylinder and the brake pad, the cab is equipped with the brake master cylinder, and the brake pump is divided into oil pressure, air pressure and lever type at the same time.

The operation of the throttle is to control the amount of fuel injected by the engine, and the harder the throttle is pressed, the faster the car will go.

SAIC Volkswagen Skoda Korok, daily supply"68"Yuan, good car"valence"Arrive.

The main purpose of learning to drive in a driving school to control the speed of the car by stepping on the clutch is to prevent the car from turning off (20 points will be deducted for one unexplained shutdown during the test), in order to improve the pass rate of the test.

In reality, if you have a situation, you have to apply the brakes (brakes) first, and if you only press the clutch, it is equivalent to coasting in neutral.

The function of the clutch is to control whether the power of the engine is transmitted to the wheels, and is used for the separation and combination of power during starting, shifting and stopping. When the clutch pedal is pressed, the two parts of the clutch are separated, and the power of the engine is not transmitted to the drive wheels; The clutch pedal is returned to the two parts, so that the power of the engine can be transmitted to the drive wheels, and the car can be driven.

In other words, the half-engagement of the clutch should be used to drive the wheels at the beginning of the car, the clutch should be used when changing gears, and the clutch should be used to stop the car (at very low speeds, close to stopping) to avoid stalling. The rest must apply the brake first when there is a situation on the road (press the clutch to keep up as needed, and be ready to shift gears and stop).

Clutch function: 1Make sure the car starts smoothly.

2.Easy to shift gears.

3.Prevent overload of the drive train.

Throttle function: When changing the speed, the output power and torque of the engine are changed. So I feel that the most direct way to say it is to change the speed pull!

The clutch is to connect the power of the engine to the transmission to drive the car, and it is also a necessary device for adding and reducing gears. The throttle should be easy to understand and control the engine speed.

The function of the clutch is to disengage the transmission and shift shifts. The role of the throttle is to increase the rev of the engine.

The clutch is a connection between the engine and the transmission, and the throttle is to control the engine speed and torque.

What is the function of the clutch? Star Awareness Project

What are the uses of clutches in automobiles?

The throttle is the equivalent of a person's throat! The upper end is connected to the air cleaner element, and the lower end is connected to the engine block! Controlled by a mechanical cable or electronic sensing by the accelerator pedal! The accelerator pedal is a common name, but in fact this pedal controls the throttle!

Controlling the air intake is equivalent to controlling the load and thus controlling the output power of the engine.

There are two types of control: one is mechanically cable-pulled, which is connected by the accelerator pedal to the throttle. The other is the electronic throttle, which is transmitted to the engine computer by the electronic signal of the accelerator pedal, and then the throttle is controlled by the computer.

In this sense, it can also be said that the throttle is controlled by the accelerator pedal.

The cable-type throttle corresponding to the electronic throttle and the pull-wire throttle is a mechanical structure that responds quickly, but it is difficult to accurately control fuel consumption and emissions.

The electronic throttle drives the electric motor through the electronic system to achieve the effect of opening the throttle, and can effectively reduce fuel consumption and control emissions, but due to a series of computing chips and motor systems, the throttle response lags to varying degrees.

Summary: Electronic throttle: Advantages: Effectively reduce fuel consumption, control emissions Disadvantages: Slightly slower response.

Throttle, as the name suggests, is to control the amount of gasoline, the landlord understands that it is completely correct from a large point of view, if you want to talk in detail, the throttle is first to control the carburetor opening, and by controlling the opening, the materialized gasoline is more or less.

And the amount of gasoline determines the speed of the car, to be precise, the throttle is to control the speed of the car, and the car is slowly driven and driven fast by controlling the throttle.

Of course, what I'm talking about later is nonsense, this landlord must understand, forgive me, haha.

The throttle is to control the amount of oil near the carburetor, much closer, and run faster! There is a carburetor between the engine and the fuel tank, which atomizes the gasoline and air, and then sprays it into the engine to burn!

"Car engines and motorcycle fuel tanks"Not in a car, huh? You're talking about the fuel tank switch. The throttle should refer to something on the carburetor.

The engine output and torque are changed at the same time as the speed is changed. So I feel that the most direct way to say it is to change the speed pull!

Make the car run away.

It is to tighten the throttle line and increase the amount of fuel supplied by the carburetor to the combustion chamber, so as to increase the driving speed of the car.

1.Make the car run away.

2.Get up to speed.

The clutch serves as a link between the engine and the gearbox.

Clutch action.

1. Ensure a smooth start of the car.

2: Achieve smooth shifting.

3. Prevent overload of the drive train.

Then it is used to control the speed of the throttle, and after stepping on the clutch, the engine is separated from the gearbox, and the vehicle loses power.

Put the gear position in neutral gear before starting, press the clutch pedal after ignition, hang the gear lever into 1st gear, slowly release the clutch, cooperate with the throttle, and start the car. The essentials of correct operation are: one fast, two slow, and three linkage.

That is, when the pedal is lifted quickly;

When there is a semi-linkage of the clutch.

At this time, the sound of the engine changes.

The pedal lifts up a little slower; In the process of linkage to full integration, the pedal is slowly lifted.