How do I set up a router after a switch? 100

Any port on the switch is connected to the LAN port of the router.

The green light above the corresponding port will be displayed;

The WAN port on the router is connected to the cat Enter the web interface and configure the router.

The switch does not need to be configured with automatic identification to connect the computer to the Internet.

The router should be connected to the front of the switch.

The modification is as follows: If the port is insufficient, the switch can only be connected to the switch, if the router is used, it can also be plugged into the LAN port (not the WAN port), and the router can be used as a switch. The IP of the computer is set to automatic.

Your problem is impossible. It's better to explain your current situation clearly, so that everyone can help you.

I didn't say what you were trying to achieve. Is it to go to the Internet or what, if so, what is the way to access the Internet, adsl, LAN or what.

The connection is incorrect, it should be the cat to the router and the router to the switch.

Do you want to make another LAN under one LAN?

How can your cat be connected directly to the switch? It should be connected to the land tour first and then to the switch, right, are you talking about your own home or unit or what network environment? Tell me what you want to do, and I'll help you out.

Ah, let's be clear, I don't understand what you're doing.

What kind of switches and routes, what are you going to do?

Yes, after the router is connected to the Changshou switch, the router will manage the switch.

But if you have a mobile phone, it is best to connect it to a wireless router and the mobile phone can also access the Internet.

1. Connect the broadband cable to the computer as shown below.

2. Open the browser, clear the address bar and enter the router management address, and set the login password of the router in the pop-up window, (the password length is between 6-15 digits), the password is used to manage the router (login interface) in the future, please keep it properly.

If the pop-up login screen is different from the above figure, it means that your router is in a different page style, please click on your login screen to refer to the corresponding setting method.

3. After successful login, the router will automatically detect the Internet mode, as shown in the following figure

4. Fill in the corresponding parameters of the Internet access mode according to the detected Internet access mode. If the detection result is that the IP address is automatically obtained and the IP address is fixed to surf the Internet, please follow the prompts on the page.

5. Set the wireless name and password, as shown in the following figure:

6. The setting is complete, wait for the configuration to be saved

The switch is connected to the router, and there are two ways to set it up:

The first method: dynamic IP mode.

1. Plug in the router, don't connect the switch first, reset the router (restore the factory);

2. Connect the computer to any LAN port of the router and enter the setting page;

3. Set according to the dynamic IP;

4. Then set the SSID, encryption method and password;

5. Save and restart;

6. After setting, connect the network cable from the switch to the WAN port of the router.

The second method: wireless AP mode.

1. Connect the computer to the LAN port of the router and change the IP address of the router. For example, most router addresses are, we just need to change the router IP address;

2. Turn off the DHCP function of the router in the settings;

3. Finally, connect the network cable from the switch to the LAN port of the router (any one is fine), note that it cannot be the WAN port.

Connect the computer and wireless router with a network cable, log in to the web configuration interface of the current router (the default IP will be otherwise, check the bottom label of the router to know), and the username and password are admin by defaultUnder Network Settings of the router, first find the WAN port settings option of the router. Set the "type" PPPOE here correctly, fill in the correct username and password, and the router will automatically get the corresponding network settings. Next, check the LAN port settings of the router. The most important thing is to turn on the DHCP function, so as to ensure that the router can assign an IP address to the device when it is connected to the LAN port or WiFi, and finally, set the SSID and login password.

Connect the router to the switch, search for the SSID of the router with your mobile phone or laptop, enter the password and connect it.

There is no need to set up, as long as it is not in the company, the network cable used by the computer is directly connected to the LAN port of the router, at this time we use the router as a wireless switch. This method is only suitable for upper-level devices using DHCP allocation.

Sell a wireless router, connect the incoming end to the WAN interface of the wireless router, according to the instructions on the wireless router manual, open the IE in the computer, enter: enter the user name and password to enter the settings interface. Then fill in the pop-up selection window according to your Internet account.

here"*"The initial IP address of each router is different, check the instructions on your router for details.