-
First, fold the clothes, quilts, etc. neatly, put them in a compression bag, and then pump or vacuum cleaner to pump out the air and seal it tightly. This one is pretty easy to use, but don't put it if you change your clothes once a week, it's too troublesome. It is more suitable for seasonal clothes and quilts.
-
You can use a vacuum cleaner to pump air from the air outlet. Or buy an air pump online, inexpensive and small. Or buy a vacuum compression bag and generally send it.
-
29 pieces, there are two plastic bags and a vacuum pump, put the winter quilt (2 * is very space-saving, I have used it for a few years, it is not bad!) The bag is quite sturdy, and it should last for a few years
-
The vacuum compression bag is equipped with a tool to extract air, and in the east and west bags, it is OK to use a tool to pump out the air inside
-
1. Put the clothes quilt into a compression bag and fold it into a shape that is easy to store, and put it as low as possible in the bag.
2. Check whether the zipper sealing part is clean, whether there are fine fibers or dust before closing the zipper, and wipe it clean with a water-soaked rag if so.
3. Install the slide, press the slider zipper with your hand, slowly and delicately pull to the other end of the zipper, when it is two-thirds, squeeze or roll the clothes or quilt, let most of the air be discharged, and quickly use the slider to pull the remaining one-third of the part.
4. Press the slide by hand and slide it back and forth on the zipper several times to ensure that the zipper is truly sealed.
5. Pump with manual air pump: open the valve cover, aim the air pump at the nozzle mouth, and pull the piston to pump the air.
6. Vacuum cleaner: Open the valve cover, align the straw of the vacuum cleaner with the mouth of the air nozzle, and open the vacuum cleaner to quickly pump and compress.
7. Open the closed zipper and take out the clothes and quilts to dry, and then they can be restored to their original state.
-
1. Unscrew the lid of the compression bag.
2. Fold the clothes, start with the four corners, if the corners are empty, it will waste a lot of area.
3. Put the four corners full and then put the middle, pay attention to put it compactly, put it casually, and compress it is not beautiful.
4. After everything is done, seal it with a tablet.
5. After all are sealed, see if there is air leakage.
6. There is a circle of threads on the manual vacuum pump, screw it on.
7. Pump up and down to pump out the air inside.
8. Screw on the lid and compress it to completion.
Normally, I just bought it last week. In fact, the main thing is what you want to put in it, and some padded jackets are okay.
Before use, clean the inside and outside of the pot with a neutral detergent in warm water. >>>More
I don't know how you're trying to connect to the internet. At present, the market network terminals are dazzling, and the list is endless. >>>More
Ask the seller for or buy a new suction rod, but the suction pump cannot be pumped without a rod. >>>More
The question you ask is very inexhaustible...