How to use the vacuum thermos kettle, how to use the thermostatic kettle

Before use, clean the inside and outside of the pot with a neutral detergent in warm water.

In order to achieve the best heat and cold retention effect, it is recommended to preheat or pre-cool the pot with hot or ice water.

Ice cubes will work better when keeping it cold.

To prevent leakage, tighten the lid in a clockwise direction before tilting the kettle.

4..If not used for a long time, wipe the liner dry to keep it dryDo not fit the following substances: dry ice, carbonated drinks, milk, dairy products, fruit juices, etc.

Avoid sudden cooling and heating to avoid loss of inner tank

1. Before using the new product, it must be scalded several times with boiling water or some edible detergent for high temperature disinfection.

2. Before use, please preheat (or pre-cool) with boiling water (or cold water) for 5-10 minutes to make the insulation effect better.

3. Please fill the water in a hurry to avoid scalding from the boiling water when the lid is tightened.

4. Please drink slowly when drinking hot to avoid burns.

5. It is not suitable to hold carbonated drinks such as milk, milk products and fruit juice for a long time.

6. After drinking, please tighten the lid of the cup to ensure hygiene and cleanliness.

7. It is appropriate to clean it.

Wash with a soft cloth and a food detergent diluted with warm water. Do not use alkaline bleach.

Metal vegetable melon cloth, chemical rags, etc.

8. The inside of the vacuum insulation pot sometimes produces some red rust spots due to the influence of iron and other substances contained in the containment, which can be soaked in diluted vinegar with warm water for 30 minutes and then fully cleaned.

9. In order to prevent the generation of peculiar smell or stains, and can be used for a long time. After use, rinse well and allow to dry thoroughly.

Steps to use the thermostat

1. First fill the kettle with water, and try not to exceed the highest water mark of the kettle to avoid boiling and overflowing.

2. Then put the kettle filled with water into the base and plug in the power supply, refer to the temperature prompt on both sides of the display screen in the base, click the on/off key, and select the function key.

3. Then click the temperature button to adjust the water temperature to your need.

4. Finally, click the boil button to boil the water, when the water temperature is boiled to 100 degrees Celsius, the water temperature will slowly drop to the set temperature.

The principle of the thermostatic kettle

The principle of the thermostat is to feel the water temperature through the internal temperature sensor, control the current of the heating plate at the bottom, heat the water to the set temperature, and when the temperature is lower than the set value, it will be accompanied by a sound when it is heated again.

The conditions for the purchase of thermostatic kettles should be noted

There are three types of thermostatic kettles: ordinary electric kettles (without temperature control devices), automatic temperature control electric kettles, and fully automatic electric kettles with air pressure water supply devices (the power supply can be automatically cut off after the water boils, or it can automatically keep warm). The thermostat is an electrical appliance that works with water, and special attention should be paid to its electrical performance when purchasing to ensure that there is no leakage. The connection between the power lead connector and the body of the pot should be reliable, the tightness should be appropriate, and the assembly and disassembly should be flexible.

OK.

The thermostatic kettle has two heating pipes, one for heat preservation and heating.

The tubes are individually controlled by a heat preservation switch, which allows the user to control the choice of whether to keep warm or not; After reaching a certain amount of time, the water temperature is still kept at the right temperature. When the heating element boils the water, it will automatically cut off the power supply; At this time, the insulation pipe begins to work, and the heating temperature of the insulation pipe tung wheel is 70 to 80 degrees Celsius.

Between; It is very good to keep the water at a constant temperature.

1. It is not repeated heating, most electric kettles have 2 heating pipes, and one of the thermal insulation heating pipes is controlled separately through the thermal insulation switch, which allows the user to control whether to continue to keep warm, so that after reaching a certain period of time, the water temperature can still be kept at the level where tea can be brewed and noodles can be brewed.

and so on.

2. The heat preservation is generally below 100W, and the electricity consumption will not be excessive in 1 hour. Because of the current electric kettle, boiling water is very fast, a pot of water is only 4-5 minutes, when the heating pipe boils the water, it will automatically cut off the power supply, at this time the insulation pipe begins to work to disturb the wheel belt, the heating temperature of the insulation pipe is between 70-80, and the water can be kept in a constant temperature state well.

Before use, thoroughly clean the stainless steel vacuum insulation pot lid, plug and the inside and outside of the pot, preheat or pre-cool (fill it with hot or cold water, close the cork for 5 10 minutes, and pour out the water in the stainless steel vacuum insulation pot), the insulation effect is better.

Because the vacuum insulation pot adopts vacuum insulation technology, because the vacuum situation can prevent the heat from being transmitted to the outside world, so as to achieve the effect of heat preservation. Therefore, to test the heat preservation effect, you only need to pour 100 degrees of boiling water into the cup, and after two or three minutes, touch each part of the hand to see if it is hot, if which part is hot, the temperature will be lost from that place. It is normal for the mouth of the bottle to have a slight fever.

1.Shop for thermostats.

When buying a thermostatic kettle, you should pay attention to the following points:

Capacity: Select the appropriate capacity size based on the number of family members.

Materials: Stainless steel, glass or ceramic are common materials, choose the one that meets your needs and budget.

2.Clean the thermostat.

The thermostat needs to be cleaned in time after each use, which can be done by following the steps below:

Empty the thermostat.

Pour in an appropriate amount of detergent.

Rinse off with clean water.

Empty the thermostat to dry.

3.Use a thermostat.

When using a thermostat, you should pay attention to the following:

Bring the water in the thermostat to a boil first.

Pour the liquid that needs to be kept warm into the thermostat.

Close the lid tightly to ensure that there is no air leakage.

Do not open the thermostat frequently to extract liquids, as this will affect the heat preservation effect.

4.Take care of the thermostat.

Maintaining a thermostat can extend its lifespan, and here are a few tips for maintaining it:

Clean the thermostat regularly to avoid bacterial growth.

Avoid leaving the pot unused for a long time, which will affect the tightness of the kettle.

Do not use too hard cooking utensils to scratch the surface of the thermostat, this will scratch the surface of the kettle.

Avoid impacts, which can affect the insulation and service life.

5.The thermostat of the brigade effect.

There are three main functions of the thermostat:

Keep warm: Keep hot water or hydrothermal ballast warm to effectively maintain its temperature.

Refrigeration: Leave cold water or liquid in it to keep its temperature unaffected by the outside world.

Decoration: The thermostat can not only play a practical role, but also act as a decoration and add to the family atmosphere.

6.Advantages and disadvantages of thermostatic kettles.

The thermostat has the following advantages:

The heat preservation effect is good, and it can keep hot water or hot liquid warm for a long time.

It is beautiful in shape and can be used as a decoration for the home.

Easy to use, hot water or hot liquids can be accessed at any time.

But thermostats also have the following disadvantages:

Relatively high and not affordable for every household.

The heat preservation time is limited, and the long-term heat preservation effect is not as good as that of an electric kettle.

Cleaning is not easy and requires regular cleaning and maintenance.

7.The application scenario of the thermostatic kettle.

Thermostatic kettles can be used in a wide range of scenarios such as:

In the household: It is possible to give hot water or hot liquids to family members.

In the office: It is convenient to give hot water or hot liquids to employees.

In the hotel: hot water or hot liquids are conveniently available to guests.

8.Epilogue.

As a household item with both practicality and decoration, thermostatic kettles are becoming more and more favored by people. As long as you choose the right brand and model, use and maintain it correctly, the thermostat can bring a lot of convenience and comfort to our lives.

Thermal insulation kettle is now a more convenient small household appliance in the home, thermal insulation kettle with its convenient and practical advantages for the majority of consumers like, thermal insulation kettle in the daily use of what need to pay attention to it? How to maintain the thermal electric kettle in daily use? I have prepared some small knowledge on the use of the thermal insulation kettle d and daily maintenance skills, I hope it will be helpful to you, follow me to see it!

Oaks insulated kettle.

Insulated kettle user guide:

1.Keep away from fire, make sure to tighten the middle plug and lid tightly, be sure to lower the bottom of the middle plug when pouring drinks, and do not allow young children to play.

2.Vacuum insulation, longer heat preservation time. Do not drink directly from the mouth of the cup hall (pot), there is a risk of burns, it is recommended to pour it into the cup or cup lid and drink it after the temperature is suitable.

3.When adding boiling water to the cup (pot), it should not be too full, as there is a risk of overflow and burns.

4.Avoid dropping, collision or strong impact, which will cause deformation of the cup body and affect the efficacy of the product.

5.Insulation switches, cup lids and other accessories are made of food-grade plastic according to national standards, please do not lose switches, cup lids, gaskets and other accessories in use, so as not to affect normal use. Brigade ambush leakage.

6.Avoid any form of direct heating or place at high temperature, otherwise it will cause resin deformation, discoloration and affect the efficacy of the product.

7.Do not add dry ice, carbonated drinks and other liquids that are prone to high pressure to the vacuum cup, and do not add liquids containing salt such as soy sauce and soup to avoid corrosion of the cup. When cleaning, please use warm water with neutral detergent, do not use alkaline bleach, chemical rags and other cleaning agents.

8.After spoiled drinks, drink them as soon as possible and wash them to avoid rotting the inner tank after spoilage. Do not use for other purposes other than heat and cold storage.

Hemispherical insulated kettle.

In addition, the following four points should be paid attention to in the process of boiling water:

Clause. 1. The water in the pot should not exceed the maximum water mark.

Clause. 2. When using, it must be filled with water first, and then energized, and it is important not to be energized first and then loaded with water.

Clause. 3. Before removing the kettle from its heating socket, make sure that the power supply is disconnected.

Clause. 4. When the electric kettle is not in use, it should be placed in a dry place to avoid moisture and reduce the safety performance, and the electric kettle should be kept clean frequently, so as not to affect its life.

Maintenance method of insulated electric kettle:

1) When not used for a long time, the inner tank should be fully kept dry.

2) In order to prevent odor or stains, clean and dry thoroughly after use.

3) Since impure water will leave red spots similar to rust, you can soak it in warm water and diluted vinegar for 30 minutes to fully wash it.

4) Do not sterilize the lid at high temperature to avoid deformation. After cleaning, it should be confirmed that the sealing ring is installed in good condition.