What should I do if the key is inserted in the door and it is broken

Teach you a simple and easy method: the key is short in the lock hole, it must not be short and deep, generally part of it is exposed, if you can't clip it out with pliers, then try the following method! You must have used 502 glue, you just need to drop a small amount of 502 glue on the head of the key, touch it, hold it for a few seconds, make it firm, and then drag it out, you can drag it out, one thing you need to remind is:

Don't drip too much, as that will stick the broken key together in the keyhole. Are you satisfied with my answer??? If you're not satisfied, contact me, and I can think of other ways for you.

If the key is broken in the lock, you can find a small saw blade, insert the toothed end into the keyhole of the lock, and make the tooth face the side of the key tooth, and then slowly turn the saw blade to make the tooth hook the key tooth, so that the key that is broken in the lock can be removed.

Bend the tip of the tweezers with pliers at an angle of less than 120 degrees to about 1 mm, and then use the tweezers to clip it out. However, it should be noted that the angle of the key in the keyhole should be the angle at which it can be pulled out under normal circumstances.

Find a wire hook first, I hope you can But if it doesn't work, then find a lock to open it, generally with a key will be If it's not easy to get, you can only change the lock.

I thought of a stupid solution, I didn't know if it would work, I glued the broken key to the broken half of the lock with 502, and tried to see if I could take it out.

You can first try to use tweezers or needle-nose pliers to clamp out, if the "sticking out" is not enough, heat it with a plastic rod lighter for a few seconds to melt in the front section, put it in the broken lock while it is hot and wait for half a minute, after cooling, gently pull it out, if it doesn't work, you can try it many times, and it has been successful many times. Try it.

If the key is flush with the keyhole, you can use another key to insert it into the other keyhole, which can push the broken heel out a little bit so that you can clip it.

Clip it out with tweezers, it's really not good, just find a lock picking company.

Use a strong magnet, move back and forth at the mouth of the key, see if you can slowly suck and move out, if not, you can only change the lock cylinder, if you want to change the lock cylinder, you must buy a lock cylinder with good anti-theft performance, you can learn about the brand "Modile", search and query, this lock cylinder anti-theft performance is very good!

A few dollars to change the lock cylinder was solved, and I didn't know how to ask me, q657769580

There's a key in it, and there's basically no way to remove it.

1. Call ** to the lock picker, the master uses a piece of something like a plastic card, and opens the door in an instant, which is a bit expensive but better than picking off the lock, pay attention to it next time you go out.

2. For technical problems, you should call the master of the lock factory to open the lock. There is a problem that is inside and inserting the blind key outside is not a professional and a professional is unable to open it.

3. If the key inside is not rotated at all, the key outside is smashed inward with a hammer, as long as it can be smashed to the end, it can be opened, if the key inside is rotated, it is useless to smash it.

Summary. Kiss this question by me, please wait a moment, 1After the tweezers are broken in the keyhole, they can be pinched out with tweezers.

First, insert the spare key into the cylinder from the other side of the door, squeeze out the key with the broken cylinder, and then use smaller tweezers to penetrate the keyhole and clip the broken key out. 2.Once the lock is broken in the keyhole, it can be hooked with wire.

First prepare a section of wire, clamp one end into a hook shape with a tiger vise, and then reach into the keyhole, keep prying the key, wait for the key to loosen, and then pull it out. I hope these are useful to you and have a happy life.

Kiss this question by me, please wait a moment, 1After the tweezers are broken in the keyhole, they can be pinched out with tweezers. First, insert the spare key into the cylinder from the other side of the door, squeeze out the key with the broken cylinder, and then use smaller tweezers to penetrate the keyhole and clip the broken key out.

2.Once the lock is broken in the keyhole, it can be hooked with wire. First of all, prepare a section of wire, clamp one end into a hook shape using the Tiger Slip Tease Xiang Selling Head Pliers, and then reach into the keyhole, keep prying the key, and wait for the key to be loosened and let Qingdong move, and then pull it out.

I hope these are useful to you and have a happy life.

I'm still a little confused, can you be more detailed?

Kiss, you can use tweezers to clip out the finch jujube celery, and then the broken key rock Ling spoon can be clamped out, unlocked and taken out, kiss I hope these are useful to you, I wish you a happy life

1.Try to use sharp tools, such as sharp scissor tips, pliers, etc., to try to grab the broken key from the outside of the keyhole; 2.Try using a line of small, thin sticks made to burn the root and push the broken key out of the outside of the keyhole; 3.

Try to pour some lubricant on the key, such as mineral oil, wax, etc., to reduce the friction of the broken key; 4.Try to clamp the broken key, and then use the tip of scissors and other tools to slowly pull out the gesture and gently pull it out; 5.If none of the above works, you can try opening the lock and removing the broken key from inside.