Two telecom network cables, both of which are 2M broadband, can they be turned into 4M if they want

Do you think it's possible??? Your broadband is there.,Each of them has recorded relevant information.,Can't be superimposed.,If you can get it together.,Telecom would have closed early.。。。 Don't be delusional, in fact, the cost of 4m and 2m is 40 yuan, you say yes, it would be nice to pay 40 yuan more for speed.

There are also static and dynamic IP, this gives you a rough idea, dynamic IP, means that every time you log in to the broadband IP address is different, it is randomly assigned by the dynamic IP manager of the telecom room, that is, there may be 60,000 IP addresses in the computer room, and every time you log in to the broadband, you will be randomly assigned one until you go offline and turn off the broadband. Static IP means that no matter whether you log in or not, the IP address is only used by you, and other personnel cannot log in to use it.

This can't achieve 4m, it's not the truth that the battery is connected in series, it's still a 2m port. IP dynamic (xdsl access mode, that is, access to the network through ** line), fixed IP (direct Internet access without dial-up, that is, a wire is directly plugged into the computer, and there is no router connection in the middle).

It's impossible.,There will be IP conflicts.。。。

There's no need to be that troublesome, right? Dual NICs? What's that? Besides, it's impossible to do what you think: 2+2=4

Up to 2+2》2

It is impossible, a computer only uses a network card to access the Internet, please ask you to use two network cables at the same time to plug in the **?

There is no meaning of a 2M router.

Generally, the speed of the router can be set (fixed 10m network speed), or it can not be set such as ADSL

The router can support ADSL of any bandwidth with no limitations.

I haven't heard of a 2m router, so this guy thinks too much.

What does 2M routing mean? What brand? What model?

If there is a 2m router, it will be. However, the minimum router on the market is 100M, so the bandwidth of the router can be ignored for bandwidth below 100M.

The following diagram shows how home broadband routing is connected to the Internet, and 1 is the bandwidth of the broadband network. 2 is the bandwidth of the router. The bandwidth that can be used by networked devices, computers, mobile phones, etc., depends on the minimum bandwidth between them.

Put the route down with the cat up and down,If it can be restored to 4m,Maybe your route is limited,Open the web page or my computer,Enter in the address bar,You can also refer to the router manual,Because you need a password) Enter the router for relevant settings。

How, check if the bandwidth limit item in your router is enabled.

It could be due to the following reasons:

1. After connecting the router, the network line is extended or the network cable quality is not good, resulting in signal loss. In this case, it is recommended that you reduce the ** circuit as much as possible and use a better quality cable for transmission.

2. If the router has set a relevant rate limit policy or someone steals WiFi to access the Internet, it is recommended to log in to the router background to set relevant speed limit options or change the WiFi password.

3. The network speed is real-time. During peak periods, the Internet speed is relatively slow, so it is recommended to avoid the peak network hours and check whether the network speed is normal.

No way, it's you who don't know how to read!

Dear Telecom Broadband Users, Hello, <>

ADSL or Ethernet access, enter the line type and bandwidth size according to your actual situation.

IP Address Range: When you enter an IP address range, you can set it to a single IP address or an IP address range, which means that all IP addresses in the IP address range will share the bandwidth size that is set later, and the total bandwidth they can use is limited by the mode and bandwidth size set later.

Bandwidth: The value of the bandwidth is not fixed and must be set based on the actual network application.

Before configuring, read the precautions on the configuration page.

Hope it helps you and have a great day!

Equipped with broadband, Internet room! Guangdong Telecom's online business hall is equipped with telecom broadband, faster, easier and more economical! 4M pure telecom broadband, no fixed line and mobile phone, one household and one line, no peak pressure on network speed, please click for details.

Buy a router that limits bandwidth.

Dear users:

Hello, it's a pleasure to serve you!

It depends on what you're doing, if you watch a movie, you can't do it, and you also have to take into account the situation of your computer.

Computer problems! There are too many things, or the configuration is too low.

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

Hello, yes, you can connect as shown below.

Yes, 1) an ADSL broadband network cable, to realize the home office several computers to share the Internet, in addition to the correct setting of the home broadband router, but also to correctly connect the cat (modem), router and computer network card. 2) The order of connection is, the ADSL broadband network cable of the telecommunications bureau, the cat router, and the computer network card. Sort out this idea, and you will find that setting up a router to share the Internet is not technical.

3) Step 1: Connect the cat. The incoming line of the ADSL broadband of the telecommunications bureau is ** line (relatively thin), ** crystal head (RJ11) is also a little smaller.

The cat has two interfaces, one large and one small, the small one is RJ11 (** line interface), connected to ADSL broadband line; The big one is RJ45, which is connected to ordinary network cables (Category 5, super 5 twisted pair). To connect the cat, you can insert the ADSL broadband cable into the RJ11 port of the cat, and then draw a normal network cable from the RJ45 port and plug it into the WAN port of the router. 4) Step 2:

Connect your router. The network cable (RJ45, big) that comes out of the cat, if it is directly inserted into the RJ45 port of the computer network card, it can be used to access the Internet. But to share the Internet with several computers, you need to use a router.

The network cable interfaces on the router are all RJ45, the size is the same, the only difference is that 1 is marked with WAN, and 4 are marked with LAN. WAN is the entrance and LAN is the exit. Therefore, the network cable that comes out of the cat should be connected to the WAN port of the router, and then the root network cable should be connected from the LAN port, and the RJ45 interface of the computer network card should be inserted, and the connection diagram of the cat, router and network card should be connected.

Power on the modem and the router, turn on IE, enter or enter, whether the login box of the router pops up.

Yes, but the internet speed is slow.