How to make an invisible door on the cement wall and the cement wall are integrated

I want to know too! Who knows!

What do you want to look like, I've done a few different shapes, and the process is different.

Now there is a decoration material called: lead wire plate, which is imported from abroad (including small parts) can make the wall and door exactly the same, we have done decoration for others, and joked: thieves can't find the door to go out when they come to steal.

It's just a bit more expensive, almost more than 1000 m2.

It can be cleaned with commercially available anti-alkali cleaners.

After the occurrence of anti-alkali, you can use the anti-alkali cleaning agent on the market, which is a colorless translucent liquid made of non-ionic surfactants and solvents, which has a certain effect on the cleaning of some wall anti-alkali. However, before use, be sure to do a small sample test block to test the effect and decide whether to use it.

In view of the harm of pan alkali, oxalic acid and hydrochloric acid have been used on the market to clean the pan alkali pollution, but the gains often outweigh the losses, but cause more serious damage. The professional pan-alkali cleaning agent on the market is also a good choice, do not choose oxalate hydrochloric acid and other strong acid corrosive products, and cooperate with scientific protective measures, through the analysis and treatment of the pan-alkali cleaning program, you can prevent the re-pan-alkali.

The anti-alkali of the wall is commonly known as frosting, and its main reasons are:

1. Calcium hydroxide, a cement product, reacts with carbon dioxide in the atmosphere to generate calcium carbonate and deposit it on the surface of concrete products.

2. In the hydration product calcium hydroxide solution, when the water evaporates, the calcium hydroxide crystallizes in the concrete cracks and gathers on its surface.

3. Limestone or sand for building contains a certain amount of soluble alkali-containing organic matter, and the hydroxide, carbonate or other alkali salt solutions formed by them can easily and quickly seep out "frost salts" on the surface of concrete and frost.

Measures to prevent frosting:

Anything that can reduce the concentration of calcium hydroxide, a cementification product, should reduce the degree of frosting. Fly ash has a certain effect on mixed materials. The effect of mixing a certain anti-frost agent is also good.

First, see if the place where the wall alkali (white powder) appears is too damp. If it is too wet, the problem of building the wall should be solved first. Then brush the white vinegar several times where alkali appears. If it is not for the above reasons, brush the white vinegar several times directly in the place where the alkali appears.

Brush the wall with latex paint alkali resistant primer on it.

Hydrochloric acid, toilet cleaner, 84 can all remove alkali from cement walls.

I know there's a house on it for sale.

This teacher has taught in class before...

Do it according to the normal wall first, scrape it with that tool when it is not dry, or take a steel plate with a texture to paste it and then quickly pull it out, mainly using the viscosity of the mortar cement plastered on the wall. It will form a special texture in the direction of the steel plate pulling.

The easy way to do this is to find wallpaper with these patterns and textures! Just one sticker is good!

The first thing to look at is your wall

What is the substrate, if it is cement zhi

The mortar blank house dao can be directly connected to the mortar surface to do the right fair-faced concrete decoration. Choose what you want to achieve, and then decide what means to use to achieve it.

The decoration of the cement wall, the most important thing is the later collocation, the gray tone of the main fair-faced concrete, mainly in the later collocation as the main principle, in the mortar surface to do the cement wall by yourself, you can choose to use the fair-faced concrete putty (you can buy it on the market, gray putty can also be, but it is best not to crack), on the mortar surface, directly scrape the putty, this technique, very simple, as long as you can scrape the putty evenly.

After scraping, when the putty layer is almost dry, polish the scraper mark on the putty, use a little finer sandpaper, and after grinding and dusting, you can roll the anti-alkali primer of Lanbaokunk's special fair-faced concrete protective agent, which can effectively protect the putty layer from alkali return in the later stage. Apply it evenly and wait until it dries well, and then do the color of the fair-faced concrete again, if the color of the putty layer is about the same, you can ignore this step.

After drying, the decorative effect of the cement wall can be made directly overlay, and the overall collocation still needs to be reasonably configured in the later stage, and finally achieve the corresponding overall decorative feeling.

You can discard all unnecessary decorations and show the original cement wall plain and elegant, suitable for the simple industrial style and modern minimalist design.

Arrange every corner of your home according to a new idea (floor plan).

The rough cement room is completely unpainted with white paint, and the roughest texture of the original is retained.

Add some embellishments, the floor next to the cement dining table in the kitchen is patched with tiles, the lighting on the ceiling is made of aluminum-style diamond-shaped chandeliers, and the walls are made of black lacquer.

Favoring the greenery of nature, the "park bench" of logs has been moved into the home, and fresh greenery has become the decoration of the home.

Hiding the light under the concrete surface of the staircase can not only be used as a light source in the living room, but also provide a great safety guarantee for walking on the stairs at night.

The triangular multi-faceted diamond-shaped lighting is a rough surface spliced with discarded steel bars on the construction site, which blends with the industrial-style rough house, and also has a strong sense of design.

The light source is cleverly embedded in the diamond-shaped steel bar, which is very down-to-earth lighting embellishment.

Drawing of the stair surface.

The staircase, without handrails, seems to have a more life-like atmosphere, sitting on the ground and leaning against the concrete wall.

After looking at the living room and kitchen, let's take a look at what their living room will look like? How to use only cement and steel bar, and still have a delicate bedroom?

The walls were replaced with red bricks, and the surface was filled with a metal grid, and in order to maintain the perfection of the shape, it was also decorated with a diamond-shaped wood grain on its surface.

In the living room, the cement surface is decorated with old wooden boards, the cabinets are replaced by steel composite shelves, and the bedside tables are not replaced by wooden benches.

In the living room, the home office is also specially designed, and the materials selected are cement, reinforced cement floor lamps, and stools.

Cement work bench with leather wrapped in the surface of the cement and the backrest woven with a mixture of steel bars.

Really good at playing, even on the lawn outside the house, a square lounge made of metal is made.

Here I recommend a bai

Under the current du new wall covering——

Zhi Case board, it is not only DAO moisture-proof, mildew and antibacterial, corrosion-resistant, impact resistant, etc., but also easy to install, generous and beautiful, as long as it is a place with high requirements for hygiene and cleanliness can be used Case board. It solves most of the wall problems. If you are interested, you can go to my space to see the information or go directly to the ** of "Guangzhou Blu-ray Yufeng Decoration Project".

No, it is also a cement mortar protective layer, and the final light is closed, and the masters know it, but I suggest that you make it directly into a self-heating state, which is very beautiful.

Construction process of indoor cement wall:

1. Do the grassroots.

If you want to paste wallpaper on the cement wall, then the base must be done. Water-resistant putty is usually used, because only in this way will the wallcovering not peel, warp, etc. The base should be solid and flat, without ash falling and no trachoma pitting.

Generally speaking, varnish should be applied to the base layer, so that there will be no missing brushes and flowing phenomena.

2. Choose a primer.

In general, latex paint is often used as a primer. The reason why it is necessary to paint a layer of primer on the cement wall is because it can avoid the impact of small particles on the cement wall on the wallpaper.

3. Coating the base film.

Before pasting wallpaper on the cement wall, the base film should also be painted, so that in addition to making the wallpaper stick firmly, it can also make the base more durable and durable, so as to achieve the purpose of anti-corrosion.

The cement wall is not smooth in this province, it needs to be sanded with sandpaper, there can be no dust, small particles, cracks, cavities, etc., otherwise it will have an impact, the best thing is to brush the wall with a layer of base film, which can make the wall smooth. First of all, do the base treatment: use putty to make the base layer of the wall flat.

Next, choose a latex paint primer with trustworthy quality. Primer is generally enough to do it once. Finally, the base film of the wall cloth is painted.

Once you've done that, you're ready to paste your favorite wallpaper on the wall. The advantage of brushing the base film is also that it is convenient to change the wallpaper in the future, and the wall is intact after the old wallpaper is torn off. It can penetrate into the base surface, making the base surface stronger and more durable, and at the same time not affected by the base surface, moisture, moisture and alkaline substances, and will not cause the base flour to be powdered.

Cement walls cannot be painted directly. Even if the wall is smooth to the touch, if the wall is not treated, it will crack and peel and hollow if the paint is applied directly. Moreover, if the paint is applied directly, it may not cover the background color of the cement wall.

Therefore, it is necessary to paint the interface agent on the cement wall first, and then carry out leveling treatment to determine that the flatness of the wall is less than 4mm. Finally, scrape the water-resistant putty twice in the batch. After scraping the water-resistant putty, it is good to paint the paint.

Putty can mask the gray color of the cement.