-
How to use the Wi-Fi direct connection function on the mobile phone:
1.Settings - Wi-Fi - On and tap Enter - Tap Wi-Fi Direct at the bottom right of the screen (at this time, the other phone also needs to turn on Wi-Fi Direct).
Note: The mobile phone operation path of the Android operating system is slightly different: Settings - WLAN - Slide to open - Click the menu key (three small dots) in the upper right corner of the screen - WLAN direct connection.
3.At this time, the other phone will receive a connection invitation, and click [Connect] to connect successfully.
-
2. Pull down along the screen and tap on the wifi logo, which is that fan-shaped logo. Or go to System Settings - wifi off.
3. Pull down, turn off WLAN and then turn it on or set Wi-Fi Direct to turn it off.
-
Forget about this network (for direct connections to known WiFi) and turn off the WLAN switch (i.e. no Wi-Fi).
-
Click on the wifi in the settings, and the wifi direct connection will stop below.
-
Wi-Fi Direct is a wireless access point that allows devices to easily connect to each other without the need for an intermediary role.
Tool Required: Samsung S9.
The specific steps are as follows:
1. First, click Settings on the main interface of the phone.
2. Select Connect in the settings.
3. Enter the WLAN interface and turn on the WLAN switch.
4. After the WLAN is enabled, click the WLAN option to enter.
5. Enter the WLAN setting interface, and click on the WLAN directly connection above.
6. Sakura Chun can click to start connecting.
-
WiFi direct connection means that two mobile phones can connect to each other through this function to realize the function of transferring files to each other.
The specific steps are as follows:
Tool: Samsung S9.
1. First, click Settings on the main interface of the phone.
2. Select Connect in the settings.
3. Enter the WLAN interface and turn on the WLAN switch.
4. After WLAN is enabled, click the Return WLAN option to enter the leaky rock.
5. Enter the WLAN setting interface and click on the WLAN direct connection above.
6. Click Start Connection.
-
If the wireless network of the Samsung mobile phone cannot be automatically connected and needs to be connected manually, it may be a wireless network problem
1.Open Settings - Wi-Fi - Menu Key - Advanced Settings - Set Network Connection Method - Set "Manual" to "Automatic".
2.Open Settings - Wi-Fi - Tap on the name of the wireless network - Forget - Reconnect attempt.
3.Try to change to another WiFi environment.
4.Back up data (contacts, text messages, **, etc.), factory reset (Settings - Reset Privacy - Factory Reset) attempt.
5.If the problem persists through the above methods, please bring the purchase invoice, repair card and machine to the Samsung service center, and the engineer will inspect the machine and deal with it.
-
Bring your ID card to the business hall and turn off the GPRS function, you can also call customer service, but the customer service needs to verify the service password, or you can find the connection settings in your mobile phone, whether there is an option to ask before connecting, you can also set it.
-
Setting: Airplane mode The mobile phone data connection is turned off, and the network connection is turned off when the wifi connection is disconnected.
-
Ways to turn off network connection on Samsung phone:
1. Pull down the notification bar and turn off the switch for mobile data or WLAN.
2. Tap "Settings" on the phone screen and find the wireless and network settings and turn off the network according to the situation.
3. Mobile phone networks are divided into data networks (traffic with mobile phone cards) and wireless networks (WLAN).
-
If you delete the Internet access parameters of your mobile phone, you will not be able to connect.
-
10086 or 10010 tell him to stop GPRS
Otherwise, the network relies on data transmission.
-
Airplane mode, all turned off.
-
1. The Wi-Fi hibernation policy should be enabled on the phone. So the wifi will turn off automatically.
2. The phone has turned on the power-saving mode. No wifi for a long time. If you don't use wifi for a long time, your phone will automatically turn off and connect automatically when you use it again.
Solution: 1. Check whether the phone's sleep policy is turned on, and if so, turn it off. Go to Settings - Turn on Wi-Fi - Menu key in the lower left corner - Advanced Settings - Select Hibernate Sleep Options Keep Wi-Fi on during sleep) - Never (increase data usage).
2. The power-saving mode is turned on, and the method of turning off is as follows: Settings - Turn off the slider on the right side of the power-saving mode (Settings - Power-saving - The slider in the upper right corner of the power-saving mode screen is off).
3. If the above methods can't be tried, you must back up the data in the phone (contacts, **, etc.) and restore the phone to factory settings.
-
Turn it off in the phone settings, or just swipe down from above, and then a wifi icon appears and tap the wifi icon to turn it off.
Now the Samsung Note3 tips are how to turn on and use the Smart Sleep function on the Galaxy Note3, which is an intelligent recognition technology for the front camera of the machine to automatically maintain the brightness of the screen. How to use Samsung Note3's smart hibernation, turn on this function, when reading e-books or browsing the web, you can avoid the black screen interruption. >>>More
Here is an example of a Samsung S8 mobile phone, and the specific method is as follows: >>>More
Hello, you can go and open the settings of Samsung games, then find the login option, turn it off automatic login, and you can turn it off.
The possible reasons why the wireless router is unstable and the mobile phone connection to wifi often drops are as follows: >>>More
If the mobile phone cannot connect to the wireless network, the Samsung mobile phone generally follows the following steps to troubleshoot and deal with it, please correspond to the following common situations, try to operate:1If you could connect before, you can't connect now: >>>More