What to do if the Lumion lens is distorted

Wide-angle lens. It is characterized by a wide angle of view, and it is possible to shoot the same scene closer to the subject than a standard lens. However, close-up shooting has a stronger perspective effect of near and far away, which is not the same concept as the distortion of the lens.

For example, when shooting a tall building from the ground, a high-quality wide-angle lens will not bend the straight line at the edge of the building, but will only make the building wider at the bottom and narrower at the top, which has a unique visual impact.

Harmful distortion of the lens is another matter, for example, harmful pincushion distortion will bend the middle of the straight line, and barrel distortion will protrude the middle of the straight line, which is distortion. To reduce the perspective effect of a wide-angle lens, the only way to do this is to keep the subject away from the camera, such as in the case of a building, where the lower part of the building is 10 meters away from the camera and the upper part is 100 meters away from the camera, and the ratio of the two distances is 10 times, then the perspective effect must be very strong. If the distance from the lower part of the building to the camera is 200 meters, and the distance from the upper part of the building to the camera is 300 meters, the ratio is only a multiple, and the perspective effect is not very obvious.

However, in this way, the building occupies a much smaller area of the frame. If you want to shoot a building up close and have the same width up and down, you must use a tilt-shift lens.

1. Change the focus;

2, pull the lens away before going out, put the part you want in the middle, and cut the part you want in the middle after you come out

Hope to help you o(o

When you shoot the path before, you should change the focus, adjust the focus yourself, find the right angle, and you have to make your own product.

If you're not using Lumion3, set the focus of the lens to 28

The steps to adjust the flare of the medium lens are as follows:

1. Open the sunlight effect option and adjust the sun height angle to the position of the format. The position is judged by the shadow effect.

2. Adjust the angle of rotation of the sun around the Z axis, so that the sun is facing the lens.

3. Open the Lens Flare Effect option. Set the effect parameters you want.

Note: The elevation and azimuth of the sun must be adjusted to the opposite side of the camera for the lens flare option to work.

Is your computer plugged into the Xbox or PS4 controller?,I'm in exactly the same situation I found that the controller was picked up and rebooted OK.。

Pick a random angle to render it...

I've also encountered it, and it's fine after the reboot.

The up, down, left and right keys of the keyboard are to move, and the rotation of the right mouse button is the rotation of the perspective, and you can speed up the movement by holding down the shift key and the arrow key during the movement.

There are four possibilities for importing without graphics:

First, when exporting a DEA document, the graph is too far away from your coordinate axis, that is, far away from the XYZ axis, so you can't see it.

Second, the actual size of the building in the document is relatively small.

3. The exported DEA file is too large, and sometimes this situation will cause Lumion to die.

Fourth, there is also a situation that the export file location or file name is in Chinese.

Let's start with free movement: the keyboard up, down, left and right keys are moving, the right mouse button is rotating the viewing angle, and during the movement, hold down the shift key and arrow keys to speed up the movement.

There are four possibilities for importing no graphics One is that when you export the DEA document, the graphics are too far away from your coordinate axis, that is, far from the XYZ axis, so you can't see it, the second is that the actual size of the building in your file is relatively small, and the third is that the DEA file you export is too large, and sometimes this situation will cause Lumion to die, and another situation is that your export file location or file name is in Chinese.

That's pretty much it, Lumion is still very easy to use, relatively easy to use.

First of all, the built-in landscape terrain is the system comes with it. There is no way to change this. Clause.

2. The self-made model can only appear in the form of objects and scenes after importing. Clause.

3. If you want to match the background of the imported model, you only need to modify the terrain material of your model to the landscape material.

Whether there is a canopy (or glass perpendicular to the building) around the building, and the reflectivity of the canopy (or glass) is reduced so that the building is not covered with a layer of glass.

The first thing under the Style tab in Animation Effects is to input and output, and then adjust the timing.

In the later stage, just use the video recording to process it.

It's most likely stuck. We recommend that you check whether the following configurations meet the requirements. In addition, whether the GPU runner is set.

Take nvidia graphics cards, for example.

1. Right-click on the blank space of the desktop and select Open NVIDIA Control Panel;

2. Click "Manage 3D Settings" and switch to the "Program Settings" tab;

3. Click the "Add" button in the first selection of custom programs, and select the application you want to use with a discrete graphics card in the drop-down box;

4. Select "High-performance NVIDIA processor" in the graphics processor in the second article, and then click Apply at the bottom right.