-
Anonymous users2024-02-10The reason is very simple, you are a soft grid, that is, to restore factory settings, to remove junk files to have a hard grid, the method is as follows:
Turn off the power first, press and hold the dial key, "* key, "3" key while turning on the power, turn on the power until the word "nokia" appears, you can't release any button during this process, wait a few seconds until "formating...... appears", then you can release the button. 3 After 5 minutes, the system format is completed, the phone will automatically restart and enter the standby screen, and re-enter the phone time.
As a reminder, you should back up important information before hard boxing, such as ** number, and back it up to the SIM card first
It's simple, o( o haha
Good luck to the landlord
-
Anonymous users2024-02-09You may enter * instead of *, entering * will not clear the C disk, it is recommended that you use * to grid again, if it still doesn't work, then try hard grid, introduce several ways to grid to you.
Soft lattice machine. 1 Use the "Factory Reset" function in your phone's settings and follow the prompts.
2. Enter * lock code 12345 is not clear C disk.
3 input * lock code 12345 clear c disk, that is, everything will be absent after the grid.
Hard-grid machine. 1. Turn off, press and hold the call key at the same time when turning on the 3rd key * and then press the power on button and don't let go until "formatting..." appears on the screenAfter that, you can let go.
2. Turn off and press the power button, without any prompt, start the grid, I hope it will help you!!
-
Anonymous users2024-02-08Didn't succeed. After the grid is successful, the time, contacts, and software will disappear. The memory card has nothing to do with the grid! To be formatted additionally.
-
Anonymous users2024-02-07It can't be like this.
How do you format it
There should be nothing left after the format
If there is any, change the format of the machine
If you can't, just change the card, or flash the phone.
-
Anonymous users2024-02-06You're that soft grid machine just a normal factory reset quite the same as a reboot.
If you want to get rid of it all, you're going to need a hard-grid machine.
Turn off, press and hold the call button at the same time when turning on the 3rd key * and then press the power on button and don't let go.
Your stuff is gone.
-
Anonymous users2024-02-05The memory card is also on the sidelines.
-
Anonymous users2024-02-04Hard, if it doesn't work, you can get the customer service to flash the machine (it is not recommended to flash the machine).
If you want to use the machine, you delete the ones you don't want first, and then back them up. >>>More
No risk, remember to back up the business card holder, and enter * password 12345 under standby
Point multi** operation, formatting.
Hello, this is a constantly updated post on the Saipan forum:
If you can hear the boot sound when you boot up, it means that there is no problem with the motherboard of the mobile phone, and the white screen is displayed without the image when you boot this phenomenon has seen a lot, generally the screen is not broken, but the screen circuit board above the screen is broken, this situation can not be repaired, generally only the screen is changed, if there is no sound when booted, it is best to get the customer service test, the customer service test fee is 20 yuan.