Taipower P85 dual core display flashing exclamation mark when charging What s the situation?

Hello, find a pin to poke the reset button of the machine to try, if it still can't boot normally, it is recommended that you upgrade the firmware program.

1. You can go to Taipower's official **.

2. Open the upgrade tutorial, there will be a detailed process, please follow the upgrade tutorial prompts.

3. If you still don't understand, it is recommended to call Taipower technical support**020-38731788.

3d1 Home:

e-mail：

Weibo: Enterprise platform.

<>This answer is disgusting.,I've also encountered the same problem as you.,It's useless to flash the machine and poke the reset key.,I've tested it myself.。 I'm looking for a way, too. Found m you.

Dear Taipower users, hello:

It is recommended that you try the Upgrade Guess level firmware.

Upgrade Steps:

i.Log in to Taipower's official website.

In the software**-tablet firmware program**--enter the four-digit ID code behind the tablet back shell, **the firmware program and upgrade tutorial corresponding to the model of the machine disturber orange potato device (**to the home computer).

ii.After unzipping the firmware package, open the upgrade tutorial, which contains detailed operation steps, please follow the steps in the upgrade tutorial to upgrade.

If the above methods cannot solve your problem, it is recommended that you contact Taipower's after-sales service outlets to deal with it for you.

After-sales details can be inquired.

That's a problem with the internal battery of the machine... It is advisable to go for repairs.

The circuit board power module is broken, the problem is that this kind of machine is not worth repairing, and it is sold second-hand and replaced with a new one.

As described, obviously the battery is good, the most likely is that there is a problem with the battery charging control circuit or power cord holder of the tablet, and the charging can be displayed in the case of shutdown, it is likely that the socket is in poor contact or the charging control circuit has components that are boiled and need to be disassembled for inspection.

Dear Taipower users, hello:

It is recommended that you reinstall the firmware.

i. Log in to the official website of Taipower --

In the software, enter the four-digit ID code behind the tablet case, the firmware program corresponding to the machine model and the upgrade tutorial (to the home computer).

ii. Open the upgrade tutorial, there will be detailed operation steps, please follow the upgrade tutorial step by step prompts to upgrade.

If the above methods cannot solve your problem, you can also contact the after-sales service outlets to deal with it for you, and the details can be inquired.

The output current of the charger is too small, and the charge is very slow, so use a greater than 1A.

Check your tablet's manual to see if there is a big difference between the rated input voltage and current of the tablet and the rated output voltage and current of the charger you are using, it is likely that the protection circuit or something has been triggered, or the current is too large and burned out a certain component.

It is recommended that you upgrade the firmware once, if it still doesn't work, ask for official maintenance.

It is very likely that the rated current of your charger is too small to meet the needs of the tablet The voltage is too low to turn on the machine It is recommended to replace the charger My tablet has had this situation before Only then did I find out that this is the case Answered.

If you can't turn on the phone yet, there are two possibilities, one is out of power, and the other may be the motherboard burned, it is recommended to ask the after-sales service.

It is possible to charge with other (small current) or mobile phone chargers, but it will take longer because the charging current is small!

It may not turn on when charging! (When the battery is low)!

2. Press and hold the power button for more than 7 seconds to reset before upgrading.

3. Turn off the computer anti-virus software for the time being.

4. Strictly follow the tutorial prompts to re-operate.

e-mail：

Weibo: Enterprise platform.

You didn't brush recovery, so you can't get in, does the computer respond when you connect to the computer? Why don't you try a different cable?

I'm also experiencing such a phenomenon.,Could you please contact me?。 Just want to know how you solved it!