The shutdown temperature is set appropriately with the target temperature

Fixed-frequency air conditioner is the compressor running at a fixed speed, after starting, start refrigeration, after the indoor temperature reaches the target temperature you set, the compressor will automatically shut down, after the indoor temperature rises to more than a value of the target temperature, the compressor starts by itself, and automatically stops after reaching the target temperature again, so that the cycle can be repeated, you can relatively keep your indoor temperature around the target temperature you set. The inverter air conditioner is to make the inverter motor of the compressor work at different speeds through the inverter, and when you start, the inverter motor runs at maximum power and starts to refrigerate. At the same time, according to the difference between the detected actual indoor temperature and the set target temperature, the controller will command the inverter motor to gradually reduce the speed, the closer to the target temperature, the slower the speed of the motor, until the target temperature is reached, the motor will be maintained at the lowest speed, so as to ensure that the indoor temperature has been on the value of the target temperature, that is, there is a change later, and it is also compensated by increasing the speed of the motor.

This is how the two types of air conditioners work differently. It is conceivable that the fixed-frequency air conditioner obtains a relatively stable temperature in the state of continuous start-shutdown, so the working noise is relatively large, and when starting, the current is relatively large, so the power consumption is relatively large. The inverter air conditioner does not stop, so the noise is very small, the temperature change is relatively soft, and it is used for a long time, because the motor is in a low speed state most of the time, so the effect of energy saving is more obvious.

Of course, if it is not used for a long time, it is not much different from fixed-frequency air conditioning. Therefore, the general inverter air conditioner is suitable for the bedroom, and it can be turned on all night at night. And the living room, because it will not be used for a long time when it is turned on, it is okay to use a fixed-frequency air conditioner.

The normal fixed-speed air conditioner will shut down when it reaches the set temperature, while the inverter air conditioner will not shut down.

When the temperature in the room reaches the set temperature, the air conditioner compressor and the outdoor fan motor stop running, and the indoor fan motor continues to work to realize the role of ventilation in a room. For example, when the temperature in the room is reduced to 27 to 26 degrees, the air conditioning compressor and the external fan motor will stop running, and when the indoor temperature rises to more than 28 degrees, the compressor and the external fan motor will start running again, and the indoor fan motor will be running in the whole process.

Inverter air conditioner: When the temperature in the room reaches the set temperature, the compressor will run at a very low frequency, for example, the compressor will run at a frequency of 10Hz or even lower to maintain a low power consumption working state, and when the temperature rises to more than 28 degrees, the compressor will increase the working frequency again and enter the normal refrigeration state.

During the use of the air conditioner, it is recommended to close the doors and windows and reduce the number of opening and closing the door to prolong the speed of the temperature rise in the room, reduce the frequency of the compressor start, stop or increase the frequency, and reduce the power consumption of the air conditioner.

Summary. Hello. Generally speaking, the shutdown temperature should be set within a reasonable range, and it is generally recommended to set it within the temperature range of the equipment to be able to work normally.

For example, for some ordinary household appliances, such as electric fans, electric water heaters, etc., the general shutdown temperature can be set at about 60; For some high-power equipment, such as servers, industrial control equipment, etc., it is more appropriate to set the shutdown temperature at about 80. Of course, the specific settings also need to be comprehensively considered according to the use environment and performance indicators of the equipment.

Hello. Generally speaking, the shutdown temperature should be set within a reasonable range, and it is generally recommended to set it within the temperature range of the equipment to be able to work normally. For example, for some ordinary household appliances, cavity files such as electric fans, electric water heaters, etc., the general shutdown temperature can be set at about 60; For some high-power equipment, such as servers, industrial control equipment, etc., it is more appropriate to set the shutdown temperature imitation dissipation degree at about 80.

Of course, the specific settings also need to be comprehensively considered according to the use of the equipment, the environment and performance indicators.

Under normal circumstances, the setting of the shutdown temperature banquet needs to be determined according to the specific design and use environment. If the equipment is working in a high-temperature environment for a long time, then setting a lower shutdown temperature can ensure the stability and longevity of the equipment. In addition, if the power consumption of the middle limb of the device is high, setting a lower shutdown temperature can avoid overheating and damaging the electronic components.

However, if the shutdown temperature is too low, it may also cause frequent shutdown of the equipment, affecting the efficiency of the equipment.