Can ordinary windows be changed into bay windows, and what is the method of changing ordinary window

1. Your community allows you to change. 2. You first understand the structure of the wall. It is best to have a brick-concrete structure.

First remove the original window, according to the height of your bay window along the window along a few layers of bricks down, generally up 2-4 pieces on it, let the processing of plastic steel or color steel windows according to the window opening you open and then enlarge about 20cm to make an extension frame and then buckle on the hole, the following can do three or four triangular brackets to fix first, put the window frame up. Note that the lower edge of the window should be slightly lower than the lower edge of the window opening to prevent rainwater from tumbling under the window into the room. Seal the gap, and fill the large gap with adhesive strips or expansion glue first.

It is best to brush the waterproof paint twice on the outside seam, it is best to install window sashes and glass, generally the front can be opened left and right is dead glass, because it can not extend too much, up to 50cm, plus the width of the wall has nearly 80cm bay window sill. The top of the window is the top, and it is best to use the color steel plate that is foam in the middle to make the top, and the rain and sound insulation can also prevent things from smashing, and the following can be used steel plate or color steel plate. Finally, when laying stone or tile or carpentry window covers, it is done together with wood veneer.

But in the end, it was only changed in the south-facing window, and the north-facing window was rainy, and the sunlight was not very good, so there was no need to change it.

In order not to damage the façade of the wall, it can be changed from the perspective of interior decoration to the effect of a bay window, which can be sat or lying, and can also be used as a small storage cabinet below.

Houses living in the community are generally not allowed to change bay windows. If it is a house in the countryside, it should be possible to change the bay window. But be sure to be sturdy and safe.

First of all, what is the method of changing ordinary windows into bay windows? Changing ordinary windows into bay windows can not only increase the aesthetics of the space, but also increase the utilization of space.

You can choose different furniture methods, some can be made into Bogu shelves, and some can be made into shelves for placing things, which will look better, and the stove can make good use of space. Secondly, what is the method of changing ordinary windows into bay windows? The perfect combination of the TV cabinet and the low cabinet under the flat window not only increases the storage function of the space, but also adds a range of rest areas, and at the same time solves the disadvantages of the house with pillars, and opens up a free space for people to restore their true self in the busy urban life.

Such a space is better, it looks better, so you can choose such a cabinet when changing the window.

Third, you can also choose better curtains, so that it is more cost-effective, or more convenient, what kind of flower shape you like is what kind of color will be better. Because the decoration style of each family is different, then the color chosen will be different. This will make good use of the space, and it will also make good use of the space.

Introduction: There has always been an inexplicable wide bay window complex, which feels romantic and beautiful, and can also enhance the utilization of space. But for the ordinary windows at home, I don't know how to transform them into beautiful bay windows.

The owner's question represents the thoughts of many owners. Next, I will focus on how to change ordinary windows at home to bay windows?

How to convert an ordinary window into a bay window body center01 Design points of "fake bay window".

Generally speaking, there is no bay window in the new blind cavity room, and many families are "fake bay windows" made by customizing furniture according to their own preferences, which refers to the effect of transforming into bay windows through the design of furniture. This design not only greatly increases the aesthetics of the space, but also improves the storage and utilization rate of the space, which is deeply loved by the majority of young owners.

02 Design points of "fake bay window":

The method is very simple: make a low cabinet with the same height as the window sill, with a height of 45 cm and a depth of about 50 cm, to create a lower window sill. I feel that by placing some furniture on both sides of the window, it basically makes it look like a bay window.

The most common practice is to customize a set of low cabinets as the base of the bay window, which is very beautiful, and can also place sundries for storage.

03 Ordinary windows are transformed into bay windows, pay attention to two points

1. The larger the bay window area, the worse the thermal insulation performance in winter, and the more solar radiation in summer will also increase the power consumption of the air conditioner. It is recommended that when designing the bay window, it is necessary to ensure that the heat preservation of the bay window can be worn to avoid problems such as condensation, dripping water, and mildew.

2. For middle and high-rise residents, in addition to designing guardrails, bay windows must also use safety glass. It is not recommended to design bay windows in the children's room, and it is more dangerous for children to like to climb.

No matter how ordinary the ordinary window, as long as there is a goal carefully changed, it can also become a beautiful and dreamy bay window, the use of furniture combination, the ordinary window can be changed into a bay window effect, so that the change can not only increase the aesthetics of the space, but also increase the utilization of space, and then reveal the method!

1.The use of warm and sunny American cherry wood as the board reminds people of the warmth and chaos of California, and the enthusiasm and running of Hawaii. With the design idea of simplicity, leisure, practicality and multi-function, it is full of vitality and imagination, allowing you to enjoy the American life freely.

In the recess with flat windows on the house type, the top cabinet and the system cabinet are connected to the ground cabinet, and a streamlined cabinet is matched to form a leisure area, which is beautiful and practical as a whole.

2.The perfect combination of the TV cabinet and the low cabinet under the flat window not only increases the storage function of the space, but also adds a range of rest areas, and at the same time solves the disadvantages brought by the pillars in the house, and opens up a free space for people to restore their true self in the busy urban life.

3.The bed is placed under the window, saving space and enjoying the view from the window at all times. Novel and beautiful, but also increase practicality.

4.The sofa cabinet made of drawer beds and low cabinets is practical and beautiful, a row of semi-open bookcases can meet your storage and display requirements, and the building desk extends the countertop to make reading and writing more convenient. The design of using the cabinet to build a flat window into a bay window not only does not have but also adds practicality, which can be described as killing two birds with one stone.

Have you learned how to change ordinary windows to bay windows? Bay windows are common in life, and general bay windows can be rectangular or trapezoidal, mainly convex from indoor to outdoor. Especially for some small apartments, with the design of bay windows, the indoor space can be extended in the interior design, and you can also enjoy the beautiful outdoor landscape.

You can get it for free

Many friends hope that there is a bay window at home, which can not only be used as a leisure area, but also expand the storage space, but some houses are equipped with bay windows when they are handed over, but most houses are not equipped with bay windows, so can it be changed without bay windows? Let's learn together.

1. If there is no bay window at home, you can transform a bay window you want. There are many ways to renovate a bay window at home, and the owner should choose the right bay window according to the actual location where the bay window is installed, their own needs and financial ability.

2. There are generally two kinds of bay windows, one is set aside by the developer when building the house, and the other is the bay window renovated by the owner himself. Some of the bay windows left by the developer can be demolished, and some cannot be removed, so they are not very practical.

3. The bay window made by the owner himself is very practical, and it can be customized according to the actual size of the installation location and the needs of the owner. There are many ways to use bay windows, such as: flap doors, low cabinet doors, wrap-around doors, free-standing ones, etc., which can be selected according to the owner's own preferences and needs and economic ability.

4. If there is no bay window at home, you can install a bay window at a suitable location at home. For example, a cabinet can be installed in a suitable place on the window, and the bottom can be installed as a storage compartment. The size of the storage compartment should be determined according to the owner's own needs, the length, width and size of the things he wants to put in.

Then it is necessary to install stone, wood and other countertops on the cabinet, so that it is a practical and beautiful bay window.

5. If you want to transform a fluttering Zen window in a small house, you should make a combined bay window cabinet, which can combine the bay window with bookcases and wardrobes, which will save more space.

6. If there is no bay window at home, you can change the window in the living room to a bay window, which should be designed as a low cabinet according to the height of the window, the depth of the cabinet should be controlled at about 400-450 mm, and the lower part of the cabinet can be designed as a drawer, so as to increase some storage space.

7. If there is no bay window at home, the bay window can also be designed as a bay window in the study area, the middle of the window should be designed as a desk with the same width as the window, and the position on both sides can be designed as a bookshelf to the top, and some books or decorations that the owner likes to read can be placed on the bookshelf, so as to make the whole space more reading atmosphere.

If there is no bay window at home, you can tailor a bay window you want according to your own needs and installation location, the above is a detailed introduction to whether you can change the window without a floating reed seepage, you want to transform a bay window at home, you can refer to it, I hope the above introduction can help you.

The specific steps are as follows:

1. First of all, the original flat window should be removed.

2. The bottom of the window sill is laid with steel bars and formwork, and the two ends should be at least 100 150mm into the outer wall on both sides, and the cast-in-place concrete floor.

3. The same formwork and cast-in-place concrete roof should be connected and poured together with the steel bars of the lintel or ring beam, otherwise it will rain and leak.

4. Wait for a week to remove the mold and plaster, and pour a window cover to save rain and water leakage between the exterior wall and the window.

5. The last step is to customize the bay window according to the required size.

Precautions for bay window construction:

1. The larger the bay window area, the more unfavorable it is for thermal insulation in winter, and the excessive solar heat radiation transmitted through it in summer will increase the power consumption of air conditioning.

2. When setting up the bay window, the thermal insulation performance of the bay window must be guaranteed, otherwise it will not only cause waste of energy, but also be prone to problems such as condensation, dripping water, and mildew, which will affect the normal use of the room.

3. In winter, the bay window is also prone to condensation. Therefore, from the perspective of energy saving, residential buildings should not be equipped with bay windows.

4. The size of the window should not only meet the lighting rate, but also take into account the thermal insulation and energy saving. The ratio of the area of the living room to the window is generally one-seventh to one-sixth to meet the lighting demand.

The above is a detailed answer to how to construct a flat window to a bay window and a precautions for the construction of a bay window.