There is no hardware or software to strengthen the WLAN signal

<> you can use this network card to put it in a good signal position, convert the CMCC signal into a network cable signal, and transmit it back to your room with a network cable, and connect it directly to the computer or tablet. The network cable can be up to 100 meters long. If you want to use a mobile phone, you can connect to a wireless router, your mobile phone can log in to the CMCC indoors, and through the router, multiple computers, mobile phones, laptops, and tablets can share the same CMCC at the same time.

The wifi signal booster is useless at all, if you want to enhance the wifi signal, you need to get a tin foil on the router.

2. Then open the wifi signal booster software interface on the desktop of the mobile phone, you can see that the signal strength is not good, you can click to enhance the signal. The position in the diagram is enhanced.

3. Then you can see that the signal strength has increased, so that the operation is completed.

There is wifi signal booster software, but in fact it is not possible to boost the wifi signal.

There are several ways to boost your WLAN signal:

1. Position the wireless router reasonably.

Since the wireless signal is greatly attenuated after crossing obstacles, especially through metal. In a family's house, there are a lot of reinforced concrete walls, so when placing a wireless router, you should make sure that the signal passes through the wall as little as possible.

2. Modify the signal channel to reduce interference.

In the configuration interface of the wireless router, you will see the option of wireless channel. Generally speaking, there are 11 wireless channels of 54m, which are channel 1 to channel 11. Signal interference occurs when multiple wireless signals are using the same wireless signal channel.

Many users do not modify the wireless signal channel after purchasing a wireless router to use, so everyone uses the channel when the router is configured by default, so that channel interference is easy to occur. If there are neighbors in the vicinity who are using the same channel, then the wireless signals of both parties will be affected. You can also use the Network Stumbler software to scan to see what wireless signals are nearby and which channel is being used.

Then make modifications to your own wireless channels to avoid duplication with other channels.

In addition, it should be noted that the signal of one channel will interfere with two adjacent channels at the same time, that is, the signal of channel 6 will affect channel 5 and channel 7, so when setting up wireless channels, you should try to make your channel more than two channels away from other signal channels.

In addition, many household appliances will also cause electromagnetic interference to the wireless network when working, so the placement of wireless routers should also be as far away as possible from these appliances.

3. Extend the antenna to enhance the signal.

Since the size of the antenna gain directly affects the transmission strength and reception ability of the signal, and the antenna of some routers on the market adopts a detachable design, it is the most direct way to enhance the signal by replacing a high-gain antenna for the wireless router. There are a lot of gain antennas on the market, and they are also cheap. However, it is worth noting that when purchasing, you should ask whether it is an omnidirectional antenna, otherwise you can only transmit wireless signals in one direction with a directional antenna.

In addition, the antenna of the wireless network card can also be expanded, but the antenna of the wireless network card is generally not removable, and it is more troublesome to replace. In fact, many small items in life can play a role in enhancing the wireless network signal. There are also many ways to DIY wireless network gain antennas on the Internet, such as using milk powder cans, mosquito coil trays, colanders, etc., interested netizens may wish to give it a try.

These tips mentioned above can improve the signal strength to a certain extent, but the actual transmit power of the router itself is the most important. However, the standard speed of the mainstream wireless router at home is 54Mbps, and the broadband access at home is generally 2M if it is ADSL, and the shared bandwidth of the community broadband is generally 10M, even if the signal strength fails to reach 100%, its transmission rate can also meet the Internet needs of ordinary home users.

Like mine, I learned about the situation after many inquiries, and I am now sharing it with you.

I'm using a mobile one.,I turned on the wlan of the mobile phone and connected to my own home route.,The display is connected.,And it's a full signal.,You can also go online.,That day I played to my heart's content.,As a result, I owe more than 100 yuan the next day.,Call 10086The first person told me to turn off GPRS.,So I turned it off.,Then go to connect my route.,It's connected quickly.,Full signal.,But can't get on the network, I called 10086 again This time she told me that WLAN can only be used in places where the mobile company has WLAN signal coverage, I asked her where there is such a signal, she said that only super-large, bustling commercial streets will have such a signal, I finally woke up, this function is a lie.

However, there is a wifi function on my computer, I can connect to my home route without a network cable, and often surf the Internet, but anyway, I paid the money, why not use a network cable, such a network is more stable, and the network speed is faster.

Hope it can bring reference, if it helps you, please choose my answer as because I'm doing the task, thanks.

'',I called 10086 again, this time she told me that WLAN can only be used in places where the mobile company has WLAN signal coverage,''This statement I think is wrong, China Mobile has his own WLAN network name is CMCC or CMCC EDU, since the mobile phone has WLAN, as long as there is a WLAN signal in the place without encryption, it can be connected and used, or after connecting, the Internet will automatically appear login page such as mobile CMCC, etc.,, Since a computer can connect to your own wireless network, theoretically a mobile phone can also do it! In addition, the "recommended answer" above has a yarn relationship with the booster signal? But the attitude of enthusiastic answers is worth learning!

No, change the place, such as a place close to the transmitting signal source, or make a self-made receiving antenna, which can enhance the signal.

The wifi signal at home is poor, teach you a trick, and the signal will increase several times.

The wifi signal at home is poor, teach you a trick without a sedan car, and the signal increases several times in a thick band.